IPhone 2.0 incoming calls

Since I have updated my iPhone to the 2.0 software incoming calls have been not ringing and or causing my phone to freeze. I was wondering if anyone else was having the same problems. Also SMS text and calendar and notes all have been opening very slowly. I have restored my phone and this does not seem to help. I was wondering if it is my phone or if more people are having these problems. Yes kind of but I have the original iPhone so it has nothing to do with 3G it will just randomly not receive a call, or freeze when it does causing it to vibrate out of control.
Message was edited by: iPhone236545

My iPhone is also not ringing most of the time. I have noticed that the ringer volume is often turned off in spite of the fact I keep tuning it up. This happens even if the phone is locked.

Similar Messages

  • IPhone malfunctioning while incoming calls

    Hi Everyone,
    Recently whenever I get incoming call suddenly music player turns ON.
    Also sometime when I'm listening to music, song shuffle itself.
    It's really bad experience with apple.
    Voice control turned off.
    Songs shuffle turned off.
    Please let me know is there any malfunctioning in my iPhone or is there any settings need to be changed (recently I havn't changed anything)
    Thanks,
    Sri

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
    If this does not work, set it up as new device again, explained here:
    How to back up your data and set up as a new device

  • IPhone 4S all incoming calls drop

    I have an iPhone 4S 32GB (White)
    It was working perfectly up until the 5.0.1 update.  Now INBOUND calls drop as soon as I answer them, I barely have a chance to say 'Hello' and I get a beep and the call failed message on-screen.
    After hours of restoring/resetting/swapping SIM's etc I have discovered that I can replicate this fault 100% of the time by having Wi-Fi and Cellular data active at the same time.  If I leave these both on I CANNOT receive incomming calls as they always fail.
    If I turn off Wi-Fi I CAN receive calls.
    If I turn off Cellular Data, again, I CAN receive calls.
    Leave both on and Im stuffed.
    Apple are sending out a box to return it to them so hopefully its just a duff handset and not something that is widespread like a bad chip or firmware as this is a major pain.

    same problem , apple store gave me a new phone , set up everything , and didn't help , on both 5.0 and 5.0.1 softwares.. will go to see them tomorow again , expecting product for £500 work properly . 16gb 4s white.

  • Iphone doesnt receive incoming calls

    Hi, for about 2 weeks i cannot receive incoming phone calls any more. Earlier it worked without problems. Now even in the phone log, no incoming calls are registered. I can make phone calls by myself, i can receive incoming calls by facetime, but no phone calls or sms. The phone is not muted (i tried the button already) . A complete reset of the phone did not change anything. Has anybody an idea what i can do?

    My carrier did not know a solution, but proposed to send the iphone back to apple.
    I removed all photos and videos. Just before i wanted to send it back, it suddenly worked again.
    Now i wonder how long it will work. After all it seems like a software problem to me.

  • I can make calls and send text messages on my new iPhone 5, but incoming calls and texts still go to my old (non-Apple) phone. Is this a problem with the phone set up, or is it a problem with my old carrier or my new carrier?

    I can make calls and send texts on my new iPhone 5,  but all incoming calls and texts are received by my old (non-Apple) phone.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Iphone hangs when incoming call

    each time my phone has an incoming call, the phone hangs. I cannot slide to answer the phone. What happens?

    Hello Recently, I started experiencing problems with my iPhone 4. Sometimes, but more and more often, I can not move the slide to pick up the phone. and this is not a problem the screen, as in any other application, the screen is perfectly responsive to clicks.
    and it became yet worse now - slide is moved but raising of tube does not take place. such problem I sometimes notice for the users of not dear android telephones, but I did not buy a telephone after 600$ in order that to test the same problems. when this situation happens - I look as a blockhead nervously trying to heave up a tube. more frequent than all it does not turn out and I have to ring up a subscriber.

  • Incoming calls bypass the general iphone lock

    Although I've set up the general lock on my IPhone 3G, incoming calls bypass the mechanism and make the phone accessible by anyone who picks it up. Is there a way to require a passcode for receiving calls....I want to block all access to my phone!
    Any help would be greatly appreciated.
    Message was edited by: chiroguy2pittsburgh

    You'll find that with the iPhone locked, an incoming call will not allow access to the phone, i.e. you can only answer and talk, not access the phone OS.

  • How do you adjust the number of rings before the incoming call goes into voicemail?

    How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

    Set by your carrier, so contact them.

  • Can not see contact name while receive incoming call.

    Dear Support,
    I have problem with my iphone while receive incoming call. it doesn't show the contact name even i have save that contact number in my phone arleady.
    iPhone4, OS:5.1.1
    My phone is A number : 090 22 11 57
    Other phone is B number : 090 22 15 05
    B call to me, then it show +85590221505. Why it not show Mr.B which i already save in my contact list?
    Pls help to shared the solution.
    Br,
    Sokheang

    Dear Support,
    I have problem with my iphone while receive incoming call. it doesn't show the contact name even i have save that contact number in my phone arleady.
    iPhone4, OS:5.1.1
    My phone is A number : 090 22 11 57
    Other phone is B number : 090 22 15 05
    B call to me, then it show +85590221505. Why it not show Mr.B which i already save in my contact list?
    Pls help to shared the solution.
    Br,
    Sokheang

  • IPhone Voice Memos Interrupted By Incoming Calls

    I notice that every time I use my Voice Memos software on the 3G(s), if an call comes in, the Voice Memo stops recording and I won't know it till I look at the phone later. Is there ANY way to stop that for that not to happen and you can have perhaps the calls go directly into voice mail so that the Voice Memo feature doesn't get interrupted? It's useless to me otherwise.
    Thanks for anyone's input!

    The voice recorder application - just like every other iPhone application, native or 3rd party - will shut down when you receive a phone call. The iPhone operates under the assumption that the device is first and foremost a telephone.
    As far as work arounds go, you can always put the phone in airplane mode when you need to use the voice recorder app uninterrupted. This will send all incoming calls directly to voicemail.
    Message was edited by: Ansuz82

  • I can call out but all incoming calls are going directly to VM with no signal that I missed a call or have VM. I can send/receive text messages from other iPhone/iPad/iTouch users, I am assuming this is really "iMessage." Is it apple software?

    I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
    Problems: Suddenly ALL  incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive)  other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
    Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem  solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
    I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before.  Where is Steve Jobs when we need him?

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Iphone 5s cannot call out any calls, but still can receive incoming calls and sms

    Hi
    anyone experiencing this problem? After buying iphone 5s less than 2 months which I never did in the past, I could no longer make any phone calls out, yet i still can receive incoming calls and data.
    Could someone kindly assist in this? 

    Contact your carrier. Phone functions are a carrier responsibility. Have them check your account. Are you seeing any error messages?

  • IPhone 5s incoming call rings on both headsets and speaker while headsets plugged in

    Why my iphone 5s rings on both speaker and headsets in incoming call, while the headsets plugged in the phone? 

    Hi Lucasethio,
    That is expected behavior on a non-muted iPhone. If you mute/silence the ringer with the side switch, you should still hear the ringer through any plugged in headsets as well. You may also find the following article helpful:
    iOS: Understanding sounds, ringtones, and alerts
    http://support.apple.com/kb/HT5800
    Regards,
    - Brenden

  • Why does my iPhone 5s not receive incoming calls

    My iPhone 5s does not ring when receiving incoming calls yet I have signal, do not disturb is off and I receive texts or voicemails notifying me of a missed call which I can return immediately. What is going on? How can I fix this?

    Yes the ringtone works. I know you are trying to help however I am fairly tech savvy and have eliminated all basic user defined settings that could cause the issue. The issue is not that there is no sound the issue is that there is no call incoming notification at all. The call does not connect to my Boone to even make it ring and display as a missed call

  • Iphone 5: Incoming Calls won't go through.

    Hello everyone,
    I purchased the Iphone 5 about 1-2 weeks ago and so far i love it. However as of recently i've been expeirencing a few issues where incoming calls won't go through.
    I'll try my best to break it down:
    Someone calls me.
    Phone "rings" on their side.
    My iPhone doesn't ring.
    I get no notification of a missed call, and maybe a few minutes later i'll be alerted to a missed call or a voicemail.
    I've tested various things that i assume would cause the issue, but so far none of them seem to be the case.
    I even went to Verizon (a few minutes ago actually) and they did a soft-reset (pretty much what i did prior) and soon as i got home i called the phone and nothing went through. I waited about a minute, called again, and then i rang. However seconds later i tried calling again, and it didn't ring.
    Also it happens are random times. First insident was a few nights ago around 10 PM. Then again a few days ago around 3 PM and finally this morning around 8-8:30 AM.
    No my "Do not disturb" isn't on.
    I have good (if not great) connection.
    At home the phone is always on WiFi
    Yes i've tried turning off LTE.
    Yes i've done a network reset.
    Yes, phone is up to date.
    One question i have is could it be only having this issue at my house? I have no way of testing if it only happens at my home (cause no one really has that kind of time to waste with me lol) so i'm not sure.

        I want to ensure those important calls get through Huxable! I understand why you are concerned!
    My first recommendation would be to make sure you are power cycling the device(turning off and on) at least once a day. This allows the device to refresh with the network and update the tower information on 4G handsets.
    Second, it will definitely be valuable to test the device in different locations to determine whether it is a location issue versus an equipment issue. If this happens in multiple locations for example, it is likely device related.
    If you find the issues occur mainly inside your home, the network extender accessory is an excellent option to boost indoor signal strength.
    http://bit.ly/AKkC
    Sincerely,
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

Maybe you are looking for

  • How do I highlight/add comments on a PDF document in IPages on IPad Air?

    How do I highlight/add comments on a PDF document in IPages on IPad Air?

  • Do I need a new optical drive?

    My CD/DVD drive stopped working a few weeks ago.  It is recognized by Windows but discs are not recognized. My system: dv6-1350us Windows 7 Home Premium x64 optical drive:  CDDVDW TS-L633M What I have already done: Uninstalled and re-installed the dr

  • How to transfer Material Master data information from ECC to CRM

    Hi ,   Changes to the Classification data of Material master for the class type-001 and Custom ZFIELDS on mara will trigger the Interface functionality. Any changes to the custom zfields and  classes or characteristic values on Material Master must t

  • UNABLE TO OPEN WMV FILES WITH FLIP 4 MACan

    I am unable to open wmv files even after having downloaded flip 4 mac. I know the files are are not damaged because they open and play on my other mac (off of external drive). Are there any other settings adjustments in preferences or anywhere else t

  • AE CS3 CS4 / Motion Tracking

    Hey, I came across this little piece which is very interesting and well produced... The author was a student at my school, and I know this was done in After Effects, all the little poping animation are simply animated gifs... But can anyone maybe ela