IPhone 2.0 - Maps doesn't work and Contacts is sluggish
Updated to 2.0 and installed the new MobileMe Update.
Maps doesn't show my position accurately. It shows I am 6 miles to the North East from my actual position and also can't find any locations when entered into Search or when an address is selected via the field in Contacts.
Also, since going over to Push Mail, Calendars and Contacts (I deleted my itools account and then logged into the MobileMe account), whenever I open up Contacts, it won't do anything for 10 seconds and then starts working normally.
Small note: I don't seem to be getting the E in the top left hand corner anymore. I get a square with a dot in it. What does this mean?
Any thoughts or suggestions?
Cheers
The 2.0 map now claims I'm 6-7 miles SW of where I really am. I'm glad I'm not alone with the map bug, but I don't have the other problems you are describing.
Similar Messages
-
Why my power map doesn't work and the button of power map is grey
After I finish installing my power map plung-in for excel， I find that this plung-in can‘t work and the button is grey.Anyone
meet similar problems could help me?
hi, Anita
I just want to say that the key problem is "the button is grey".
I have tried all your solutions, but none of them worked.
And with my regret, I have to say that power map is listed in both "COM Add ins"
and "Excel Add ins", but still, the button is grey . -
My iPhone 3gs lock button doesn't work and my screen turned black.
My iPhone 3GS screen just froze and turned black..normally I would just be able to press the lock button and the home button and it would fix it..but the lock button doesnt work..I'm kind of stuck...
In case you are not succesful, there is a trick-around:
http://osxdaily.com/2013/07/29/broken-power-button-iphone-ios-fix/ -
I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2
icloud just keeps bringing up my old email address & asking for my old password which doesn't exist anymore and when I try to sign out of icloud it wants my old password, when I tried to change my primary email back to the old one it wants me to verify it through an email address that doesn't exist. Please can you help me sort out this nightmare.Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe -
How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.
Hello and welcome to the support community
As you know, your iPhone 5 is not compatible with our iBook G4. To get your music in iTunes from your iBook to your iPhone you would need to migrate the music files to a newer intel based Mac. A Mac which has Mac OS X 10.6 or higher installed. Then sync your iPhone 5. -
My iPhone 4 power button doesn't work, how can I get repair it and how much will cost, want to keep same phone everything works fine not power button not working unable used my phone. My warranty is Expired how much will cost to put it on my phone plan? Thanks!
Hi Julio,
Here's a link for your question:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Cheers,
GB -
I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes
The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it
-
I have a virgin moble iphone that i found, the power button doesn't work and the phone is saying disabled,what can i do to fix it?
Probably nothing, the phone has a high likelihood of being stolen and if you try to Restore it you will run into Activation Lock. Turn it in to the local authorities.
-
hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
so what should I do? please help me =(
P.S. may be I wrote with some mistakes, so I apologyze for itHello darkhanfromaktobe,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Have a nice day,
Mario -
i have iphone 3gs and im update my iphone to ios 6 and after it doesn't work,and i can't restore my iphone please help meeeeeeeee,i neeed my iphone:(
how can i restore my iphone without update?because when i want restore itunes told me restore and update and when i restore and update my iphone take the ios 6 and it doesn't work again...please help mee...tnnnxxx
-
I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??
You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212 -
i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.
I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot. -
I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice
From the Firefox help files;<BR><BR>
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches. -
My iPhone 5 speaker suddenly doesn't work properly! The volume is so low I can't hear the phone ring. I've restored and updated and done everything I can think of. Please help!
Sorry, I think you got scam.
Last thing you can try is restore as new:
http://support.apple.com/kb/HT1414 -
I have iphone 4s and can't send MMS. I contacted Sprint, they checked everything and it is fine. The advised me to contact Apple. I tried to reset all settings, shut down the iphone but still MMS doesn't work. Plz help!
Did you already try to set it up as new device?
How to back up your data and set up as a new device
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Maybe you are looking for
-
import java.io.*; import java.net.*; import java.util.*; public class tst { public static void main(String args[]) throws SocketException { Enumeration<NetworkInterface> nets = NetworkInterface.getNetworkInterfaces(); for (NetworkInterface netint : C
-
[SOLVED] Is there a nice way to map scancodes to keycodes without HAL?
So I've just upgraded to X.org 1.8 and don't need HAL anymore, except for one thing - mapping my extra keyboard keys. The only way to do this without HAL that I can find is by just sticking a bunch of setkeycodes commands in my /etc/rc.local, which s
-
Will you be putting out a new camera raw or update that will support the Canon 7D Mark II?
I have recently purchased a Canon 7D Mark II and do not have camera raw to support it. Will you be developing this soon???
-
MacBook Pro MiniDisplay Port Problems
I have an Early 2011 13" MacBook Pro. I recently ordered a minidisplay port to HDMI adapter off of amazon. I finally got it but most of you can guess what happend when I connected it to an external display. Yep, nothing. I tried numerous times clicki
-
Mono to FM Stereo on Creative Zen Microph
Hi I'm sorry if this is a stupid question. I have just bought a Zen Microphoto. The radio seems to be stuck on mono. Can anyone tell me how I can get FM Stereo? Thanks