IPhone 2.2 Update Issue
After I started to update to iPhone 2.2 it said that it was unable to download. Immediately after my phone cuts off and the screen shows a USB cable and the iTunes picture but the phone will not cut on. How do I get it back on?
for those of you with essentially a "dead" phone, try getting it into recovery mode, http://support.apple.com/kb/HT1808
also here's some trouble shooting steps that may or maynot help. please do only what you are comfortable with. there are some more advance steps (such as shutting off firewalls).
http://discussions.apple.com/message.jspa?messageID=8552812
in addition to those steps, you can also try:
restarting itunes
reINSTALLING itunes
restart your computer
good luck.
Similar Messages
-
Iphone 4 software update issue
Hello,
I m using iphone 4 with current version 7.1.2
and want to update it to ios 8
but when i try "check for update" it shows "already up to date"
Plz help me in this regard...
Thanks....
ShubhamAn iPhone 4 can't be updated to iOS 8; it has a single-core CPU, and iOS 8 requires a dual-core one.
(118146) -
HT201210 iphone 4 software update issue because disk using is full even though saving to iCloud
Trying to update an iphone 4 from 5.1.1 to 6.1.3 and keep getting an error message at the end saying the disk you are attempting to use is full. The phone has been synced and has room available but for some reason the software won't update. Suggestions?
Is this an over-the-air update, or are you updating through iTunes? If you are using iTunes on your computer you need about 3 GB free on your C: drive (Windows) or your Macintosh HD (Mac). If you are updating over the air the iPhone also needs about 3 GB free. All of this memory is not needed after the update is complete, but it is "working storage" during the update process.
-
Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??
Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.
Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty. -
The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.
-
had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?
You might want to check this thread https://discussions.apple.com/thread/3374367 hope this helps
-
My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
Updated my Iphone 4s to the new IOS and now i can't restart or recover it. as soon as it starts recoring, the status bar fades and the connect to itunes screen appears. WHAT THE HEY!? I'm SICK of UPDATE ISSUES!!!!!!
Yes, yes, yes... I've gone through all the common sense trouble shoots. Would't be here asking questions if that answers existed on the net. Sorry if I sound a bit edgey, but I've had nothing but issues with every update since IOS 7. Clearly there's nothing that can be done about this. and this is the final nail in the coffin to try to make me buy an Iphone 5.
-
iOS 5 update issues. It tells me "This device isn't eligible for the requested download." Anyone else having this issue? It's giving me this message for my iPhone 4 and iPad 2.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
Issue with iphone 4 to update IO S 4.1
I just got the new iphone over the weekend and since there I cannot update the new OSI 4.1 update for my phone, I try everything listed on apple site and I only get this warning "this iphone cannot be updated at this time because the iphone software update could not be contacted or temporary unavailable", I try in different networks beside mine and still this warning keep it coming, is anyone with the same issue?
I'm having the same issue. Alot of you claim to "know" about Apple and there software/products. Where's the help here? This post has been up for quite a few days now. Where the **** is Apple's support team on this? Or is it fAilpple?
-
I just bought an iphone4s, white, 32gb. Sometimes when I make a phone call the person that I am ringing cannot hear me but I can hear them. I have to turn the phone off and then on again, then call them before they can hear me. I dont have the phone in a cover as yet. Is anyone else having the same problem and is there a solution?
brconflict1 wrote:
Since the latest updates to iOS, I'm hearding more issues reported to my company where iPhone users are not able to be routed correctly in our IVR. From the PBX, I'm seeing such as the following example: Callers dialing an extension 312, for example are able to dial 31, but the 2 is not responding on the iPhone. When the caller does eventually get the 2 to go through, the PBX states 31 is an invalid extension, and then registeres the 2 as a new entry, which is our Sales Queue option. I have confirmed this on my iPhone 4S.
Dialing in the main keypas dialer on the iPhone is fine. However, the additional, smaller keypad for IVR nagivation use is not.
IF the keypad is fine on the iphone, but not smaller keyboard whatever that is, what makes it an iphone/Apple or software issue. -
hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
-
I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered
Hi waqaskhan91,
Thank you for visiting Apple Support Communities.
If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
iOS: Troubleshooting Messages - Apple Support
If you only see this behavior with a few contacts, you may want to try these steps first:
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Best Regards,
Jeremy -
Hi guys, When I try to update my iphone4s to the latest software on itunes via my MacBook a message displays a message: 'This iPhone "Seans iphone" cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable'. This has happened a few time s now. I have look through the FAQ's but no luck. Can someon help? Cheers
Try posting to the correct forum.
This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
Try posting to the iTunes for the Mac forum.
Maybe you are looking for
-
Tour Sync Issues with Outlook 2003 and Error Code 0x8004fceb
Hello, I have a Tour with DM 5.0, which I sync with Outlook 2003 on my laptop running Vista O/S. I am having a problem deleting items from the Tour that I've previously added via a sync with Outlook. Some time after syncing, I delete the items from
-
Hi Gurus, Please explain for Period Closing and Opening we have to do only MMPV or is there any step by step procedure is there.(incl.for all the Modules) Tks.
-
Open Documents in transaction CV04N
Dear Experts During opening Documents in DMS in transaction CV04N occured this message: The file C:\DOCUME1\dir\LOCALS1\Temp\file.t cannot be created. At the beginning of work with open Documents everything is ok, but after open few documents occured
-
The search for a perfect design pattern
The search for a perfect design pattern I am searching tip to upgrade a labview program used. I am looking for the best approach to make my program more robust and scalable.Software and hardware. Today the system consists of : GPS, weather station,
-
Rrror: RABAX_STATE for Information Broadcasting
Hi there, Can you let me know how to fix this issue? I got error message when I use Information Broadcasting to schedule the query. The termination tye was: RABAX_STATE. When I checked it in ST22. It looks like a communication error. What can be the