IPhone 2G SMS messages not restored onto new iPhone 4 (7.1)

Just gave my wife my old iPhone 4, giving it a fresh install of 7.1.1 and then restoring a backup of her Original iPhone (2G, 3.1) onto the new iPhone 4.
Pictures, notes etc have restored, but there are no messages in her SMS/Messages app. This is a problem. A big problem. My big problem (apparently).
I have been able to see/extract her SMS.db file and read sms messages from her backup using some thirdpartycrapware, so I know it was backed up.
There seems to be no documentation for this scenario - everything I have read says simply "Itunes backs up and restores all messages".
Disclosure: I have not yet fitted the new phone with her sim card (since it needs to be cut down, or a micro version purchased). I would assume this would have no affect on whether the messages were restored from the backup, but crazier things have happened.
Can anyone help?

Thanks, I didn't say - I've already tried to restore again, but with no luck.
I guess if there are no obvious solutions, it would be helpful to hear from anyone who had successfully done this (restored 2G sms backups to iPhone 4). I can't help but wonder if it actually doesn't work, given that the messages app has changed alot from 3.1 to 7.1.

Similar Messages

  • SMS messages not restoring to new iphone 4 from iphone 3g

    Hi all
    My wife has just got an iphone 4 and I have been able to restore all of her data from her iphone 3g except for her text messages.
    I have tried a couple of times to restore and think that I get an error message that flashes up but don't get a chance to read it before the restore has completed.  Everything else is OK including contacts, apps, photos etc.
    iPhone 3G is 4.2.1
    iPhone 4 is 4.3.3
    Thanks in advace for any help.

    Could very well be the backup of the 3G is corrupt. Is all of the data still on the 3G? If so, you could try starting over. First delete any and all iPhone backups listed under iTunes>Preferences(under the edit menu if using Windows)>Devices. Then connect the 3G and manually create another backup: right-click the phone in the left device pane & select "Backup". When complete, eject the phone. On the iPhone 4: Settings>General>Reset>Erase All Content & Settings. When complete, connect the phone & try restoring from the fresh backup of the 3G.

  • SMS messages not restored after iOS 7 update

    Both my iPhone and iPad are displaying very small numbers of SMS messages following the iOS 7 update. There are more on the iPad but very few on the iPhone. Both were backed up via iTunes before the update. The update and backup were applied in Winodws 8 in case this is significant. I wondered if there might be an issue related to messages which don't relate to a listed contact as the ones I was particularly trying to find were connected to an unsaved contact. Any help or

    Well it seems I can answer my own question. Messages was populated by my old messages once i started to use it. Strange as I wasn't aware of having backed up to iCloud, only iTunes. Anyway, all is fine now.

  • I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    Hello, Anita.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup.  This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6.  Try going through the steps in the article below.  
    iOS: Unable to restore from backup of a newer device
    I would also check to see the backup dates in iTunes and if the  backup is located on iCloud instead of iTunes.  
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
    Cheers, 
    Jason H.  

  • Backup contacts & messages and restore on new iphone with another computer

    Dear,
    My brother gifted me iphone-4 which was in his use, he has no music, videos even not much photos. But he has much contacts and messages also messages on viber.
    I made backup by iTune and also copied the backup folder from mobilesync from my computer. the backup is just only about 256MB.
    If i email him this backup folder or give on flash drive, Can he restore on his new iphone-4 or iphone-5 ?
    please advice me in this regard that the itune backup include contacts & messages and can be restored on new mobile with another computer.
    Thanks.

    Hey shoaibadil,
    Thanks for the question, and congratulations on the iPhone gift.
    It sounds like you are doing everything correct, however I suggest that you backup your iPhone, and restore his iPhone with the backup at the same time (instead of emailing). The backup file is probably too big to email to your brother. You could also use iCloud to accomplish this:
    Transfer content from an iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    Thanks,
    Matt M.

  • Sms messaging not working on iPhone 6

    I Have iPhone 6 + with iOS of 8.0.2.  It seems that I am having trouble sending and receiving certain text messages. I believe they are SMS text messages. Help!

    Hey Loey814,
    Thanks for the question. I understand that you are experiencing issues sending SMS messages on your iPhone 6 Plus. The following resource may provide a solution. I have highlighted the initial troubleshooting steps, but be sure to check out the full article for additional advanced steps:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    To resolve issues sending and receiving SMS, follow these steps
    1. Go to Settings and turn airplane mode off.
    2. Make sure that you have a cellular network signal in the status bar of your iPhone. If there's no signal, learn more about troubleshooting no service.
    3. Restart your iPhone.
    4. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    5. Remove your SIM card and insert it again.
    Thanks,
    Matt M.

  • SMS messages not syncing in iOS 8 and Yosemite

    I'm using iOS 8 and Yosemite.  I was able to receive calls and sms messages from my phone on my computer.  That has all of a sudden stopped.  SMS contacts are now listed in red in Messages and are not delivered.  iCloud accounts are the same on both devices.  Any ideas?

    Hey srobs,
    Thanks for the question, I can definitely understand how frustrating it may be when messaging does not work on your iPhone. The following resource provides some great troubleshooting steps that you can attempt:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    To resolve issues with sending and receiving iMessages, follow these steps
    1. Check iMessage system status for current service issues.
    2. Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    3. Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    4. iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    5. Restart your device.
    6. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Make sure that the contact you're trying to send a message to is registered with iMessage.
    3. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    4. If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    5. Back up and restore your device as new.
    Thanks,
    Matt M.

  • SMS messages not getting through

    using iOS 5.0.1 on a 3GS.  If I have iMessaging turned on and I text someone who has a phone other than an iPhone, they don't get the text.  I DO have the "Send as SMS when iMessage is unavailable" button checked.  I also DO select the person's mobile phone number, NOT their email, when I'm texting them.  I have experimented several times just now with a friend and they are NOT getting texts from me.  This seems like an awfully basic, awfully serious, awfully annoying bug. 
    I am now in the middle of experimenting to see if I can text at all if it's not iMessaging.  I have turned iMessaging off, and as far as I can tell my texts are STILL not getting through.  So, as far as I can tell, there is no way for me to text now.  What's the problem?
    Rich R.

    @Rich,
    I'm on Fido/Rogers (Canada) not AT&T, so my experience may not be applicable. But I have found in the past that older versions of SIM cards would not work properly in newer phones, and vice versa. Not just iPhones, but in general. SIM cards have different capabilities, varying amounts of internal memory, and different interface specs.  It's plausible that the vintage of SIM that shipped with your 3G (or whatever you had before) might be slightly incompatible with the 3GS.
    Another gotcha that I've encountered is the phone number (server address) of the SMSC that is programmed into the SIM. Large wireless carriers often (usually) have a number of different SMSCs distributed around their network. It's possible that they changed your designated SMSC. If your SIM still points at the old SMSC (and AT&T has moved you to a different one), that might explain your SMS problems. On the other hand, if the SIM you are using is the one that shipped from AT&T with your 3GS, then this is probably a red herring. Still, I think it would be useful to put the SIM into a non-iPhone and see if you can send/receive texts, just to verify that it's not a network problem.
    Programming of the proper SMSC into one's SIM card can be done over the air -- the carrier sends a specially-formatted SMS message to the phone, and the phone then updates the data in the SIM card. You might call AT&T and ask them to do so.
    I'm grasping at straws here. SIM vintage and/or SMSC configuration might have nothing to do with your problem.
    DRC

  • Delayed sending of SMS message not working

    My Curve has an option to delay the sending of SMS messages found by clicking the menu key in a new SMS message and "OPTIONS" it has an option for "delivery period" with choices of "immediate, 15 mins, 30 mins, and so on" but when I select a delay, it sends the message as soon as I hit send? Does anyone know how to work this feature? I can't find anything about it in the manual.....
    Thanks
    Cas

    That's unfortunate. However, without more information, there's probably not going to be much anyone here can suggest. Try contacting your carrier and making sure your account is properly provisioned.

  • SMS messages not all showing up in OVI Suite

    I am trying to transfer all my text messages from my Nokia 3600 to my Nokia X6 using Ovi Suite. Not all of the texts (in the inbox, sent and saved folders) are showing up in OVI. There doesn't seem to be a pattern either, it's just random texts not showing. Does anyone have any idea how I can solve this as I'm really keen to transfer everything over? I tried using the old PC Suite but same thing is happening. Many thanks in advance for any help.

    Not sure if this will work too.. because here also some errors are reported.. but no harm trying..Instead of sync.. back-up your messages and then restore..
    ...other method is .. try the SWITCH function on your new phone.. If your old one is compatible to respond..( do not know whether it is..) you may get all the messages on to your new one..

  • Separate Email and SMS messages not found

    Hi Guyz,
    I'm just wondering, I can't find any options under messages separating email and SMS messages on my 8100.  Would this be a platform issue?  My current platform is v4.2.0.  Is there a way to download and upgrade a new platform?  Or can i just download a theme that has that option...
    Thanks in advance

    Go into messages,
    Press Menu button,
    Scroll to options,
    then general options,
    scroll down and you will see SMS and Email inboxes: Theme controlled etc, change it to seperate.
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • Text messages not restoring correctly

    Hi 
    I have a BB Curve 9300 which I back up completely (i.e.. all data) on a regular basis using the BB Desktop Software for my Mac.
    Today (11 Jan 2012) I went to restore only 'Text Message' data from a back up I did on 9th Nov 2011. 
    On completion of the restore, 12 Text Messages we're restored to my device, but the actual message content is blank. I.e.. the messages appear showing the 'Sender' and the 'Date', but the actual message content is missing. The icon for the messages is the same 'green bubble with a pen' that appears with draft messages. 
    Any ideas at all please on what has caused this issue, and how I can go about getting the content of the messages restored?
    Many thanks

    You can extract the SMS messages from that prior backup using a PC software MagicBerry made by Menastep...
    Try that.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on new iMac.

    Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on Firefox on new iMac.

    Firefox 2 versions use the file bookmarks.html to store the bookmarks.
    See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    With Mac OS X 10.4 you can use Firefox 3.5 or 3.6
    * http://www.mozilla.com/firefox/all.html
    * http://www.mozilla.com/firefox/all-older.html
    *http://www.mozilla.com/en-US/firefox/system-requirements.html
    *http://www.mozilla.com/firefox/system-requirements-v3.html

  • RAZR Verizon - SMS Message not fixed by 10.4.7

    I installed the 10.4.7 update and I still can't use the "SMS Message" function in the "Address Book"
    I have a Verizon RAZR V3c. iSync was updated to version 2.3. The phone synchronizes with the address book perfectly, but i would really like to use the SMS Message function.
    Any Info???

    Having the same problem with the SLVR, Cingular. Everything else works fine, syncing, file transfer, everything, just can't get the "SMS" or "Dial with Cell Phone" commands in the Address Book to work.
    When I hit the Bluetooth button in the Address Book, it asks me to pair the devices, enter a code (I've used both 0000 and the 8 digit code given by the Bluetooth Set Up Assistant), but the SMS and Dial commands will not "un-grey."
    I've also noticed that when I use the "Find Devices" command from the phone, it won't find anything, despite the fact that my computer is already paired and set to automatically accept connection. As I said, file transfer, syncing, etc. all work fine.
    Everything worked fine with my SE T68i.
    Anyone?
    iMac   Mac OS X (10.4.7)  

  • SMS messages not listed alongside calls

    Why can't I see the content of my sms messages sent via Skype. Using on Android Galaxy S5

    Bit of a strange one indeed......have the missing texts got anything in common? i.e. they are longer than one text page/sent in 2 messages, or are sent to multiple contacts etc...
    Best people to speak to really are the support peeps over the phone as they may have heard of this specific issue, or can forward it onto a specialist.

Maybe you are looking for

  • Some help needed in creating trigger

    Hi Everybody, I was practicing trigger and I came across a question but i was not able to form a logic to create the trigger.. Here is the question While modifying the EMP table, ensure that the salary is in the valid range as specified in the SALGRA

  • Multiple Errors in the log file of 4402 WLC

    Hello all, has anyone seen this error before? If so, what is it referring to? *Jun 23 15:59:49.202: %USMDB-3-MSGTAG030: usmdb_apf.c:260 For information regarding Emergency image Version,Please refer Controller documents. *Jun 23 15:59:18.939: %USMDB-

  • Alert Problem

    Hi experts, I am doing idoc to file scenario, its working fine. I have done alert configuration for this scenario. Alert is triggering only for mapping error. but in receiver determination i placed filter for particular field in idoc. For some field

  • Backup ABAP Programs

    Hi Everyone, I need your help. I am working on a tool that can backup the ABAP source codes and tables. I am using the READ REPORT to get the source code and store the result in a text file, my question is, if I want to give this tool to a client , w

  • Once more on right-aligning footnote numbers with GREP

    For some jobs I want the footnote numbers in the notes to align on the period that I have IDCS4's Footnote Options add (along with an en-space) as the Separator between the note number and the text of the note.  No big deal if I define the footnote p