Iphone 3 g does not boot cannot shot off Apple icon constantly on

iPhone 3 G cannot turne offor on, Allpe icon consttantly on

Hi gyurika!
It sounds like you may need to restore the software on your iPhone. Judging by your post, it seems like your phone may not be recognized by iTunes in the state it is in right now, so I would suggest using this article as your guide for restoring the phone:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Similar Messages

Power Mac G5 does not boot up, just grey apple on white screen?

Power Mac G5 does not finish starting. The monitor screen turns white and the grey small apple appears. Then the fan motor starts running fast on the G5 so shut system down. Is this a video or G5 problem?

Hi, so many thngs it could be!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any of that work?

HP MS218 Not Booting - Does not POST - Cannot reach BIOS

Hello,
I have an MS218 (product number: BR372AA #ABA) that I have been having issues with. It used to work fine (ran on WinXP), but currently will not even boot properly at all. No software or hardware changes were made to cause this problem to begin occurring, it simply just started happening one day when I went to turn the computer back on. The issue that I am currently experiencing is as follows:
- Power stays on, but nothing is ever displayed on the screen
- Does not post, cannot reach BIOS
- Acts almost as if it is resetting itself constantly, the fan in the back will start to spin for a second or two, then stop, then start again, and repeat indefinitely until I unplug the power adapter.
I initially figured it was a hardware issue, likely the motherboard, and began to troubleshoot the problem. As I removed non-vital components, the problem would persist. For instance, it happens regardless of external things (keyboard, mouse, etc.) being plugged in, or regardless of the hard drive or optical drive being plugged in. It still appears to happen in the absense of memory, however, I will instead hear beep codes (likely telling me that I don't have any RAM in). Ultimately, I decided to order a replacement motherboard, which recently arrived. Upon replacing the motherboard, the exact same problems happen, which leads me to believe that the motherboard was somehow not the culprit. I have also tried multiple power adapters to no avail, as well as resetting the CMOS battery without any luck. I'm really at a loss for what to do from here, and am currently sitting on hold with HP tech support.
Any advice is welcome. Thanks in advance for your time and assistance.

Hello Jaycera,
There are two more components that we haven't replaced or look at and I would approach them in the order listed.
1. Power supply
2. Processor
It sounds like it's a power issue the computer is getting enough power to start booting up and then losing it. Thus anytime I hear a power issue the first thing I think of is a power supply issue.
The other thing is it could be the processor. The computer starts booting, makes a call to the processor, fails, boots down, starts booting up, makes a call to the processor and here we are in a vicious cycle.
It could just be the processor needing reseated. Take it out, put it back in and make sure it's in properly and no pins are bent, or the processor could be bad.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

HT201269 Hi I want to back up my photos from my iPhone 5. How can I do this? I have an iPad mini but cannot sync to an iPhone as iPad does not have USB port. Can you help please x

Hi I want to back up my photos from my iPhone 5. How can I do this? I have an iPad mini but cannot sync to an iPhone as iPad does not have USB port. Can you help please

You have to back them up to a computer. You would import them either to iPhoto or to the Photos app in your PC:
http://support.apple.com/kb/ht4083
Cheers,
GB

Mac does not boot past white loading screen and disk cannot be repaired?

So when I turn on my Macbook Pro and it does not boot past a white screen with the Apple logo, loading wheel and progress bar. When the progress bar completes, the Macbook shuts down and when I open it again the cycle is repeated. I have opened it in Safe mode and it still showed the same thing. So I opened it in Recovery Mode and had Disk Utility verify and repair Macintosh HD. As it turns out, Disk Utility said Macintosh HD is beyond repair and I need to back up my files and reformat the whole Mac. Unfortunately, I have never used Time Machine since I started using the Mac and I obviously cannot use it now since startup does not even get past the white screen.
How do I reformat the Mac when it does not even go beyond the white screen during startup? My Mac did not come with any recovery or installation disks. Are my unbacked up files gone for good?
Thanks.

PochAstudille wrote:
How do I reformat the Mac when it does not even go beyond the white screen during startup? My Mac did not come with any recovery or installation disks. Are my unbacked up files gone for good?
Since you are able to get into Recovery Mode (Command+R), you can erase/format your Mac via Disk Utility.
Your files/data might be OK. One way to get your data off since you have no back up would be to have another Mac and connect the two via a Thunderbolt cable or even an ethernet cable (I think), then restart your 'bad' Mac into Target Mode by restarting and pressing the T key. Then go onto the 'good' Mac and see if you can copy the data files you want over to it.

I cannot install app from my pc. I bought new 4s today and i want to install apps to my iphone. but it does not sync.

I cannot install app from my pc. I bought new 4s today and i want to install apps to my iphone. but it does not sync.

You are aware that you can only sync apps using iTunes and that the apps must be from Apple app store?
What did you install in the Phone Shop?

HT4061 I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1

Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason

Toshiba Satellite P870 upgraded to Win 8.1 does not boot

I have a Toshiba Satellite P870 with Win 8 preinstalled. Soon after upgrade to Win 8.1 and basically successful removal of “watermark error” (secure boot activated) the machine stopped booting completely: after pressing the power button ventilator sound
is heard with periodically changing loudness as well as clicking sound from the speakers. The screen stays black. Attempts to start the PC through pressing F2 or zero buttons did not produce any result. Neither did I succeed with recovery discs I created before:
the system simply does not boot from the disk. It looks like I tried all options offered by Microsoft and Toshiba. I would be happy to roll back to factory settings.
Could someone give me hint what to do next?

Hi,
For the issue, let us know how to remove the “watermark error".
Meanwhile, I would like to confirm if you could access the BIOS.
I suggest you update the BIOS version to test it.
If you want to repair the startup issue, you should use windows 8.1 recovery discs or installation discs.
Meanwhile, if you cannot access the BIOS, it may be caused by hardware, I suggest you contact the Toshiba manufacturer for further help.
http://support.toshiba.com/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact
information.
Regards,
Kelvin hsu
TechNet Community Support

IMAC does not boot, only beeps. Video attached

Hello:
I am trying to figure out why an iMAC does not boot properly.
Memory:1GB (only 1 module in one of the 2 available slots).
Everytime I push the power button I only hear a sound and that's it.
You can hear the HDD spinning but the screen is always black.
Please find the sound that the iMAC makes everytime I turn it on:
http://www.youtube.com/watch?v=duRTB3iDZEU
Keboard does not respond so I cannot use things like press a key when turning on the computer, etc.
Mouse light is ok.
I am a newbie with MAC's so excuse me if I'm not doing something right.
Thanks

Hello robertin75
Check the ram, if the module has gone bad, has become dislodged or not fully seated in the slot then the iMac will only beep indicating an error and will not startup.
http://support.apple.com/kb/HT2341
I'm not exactly sure which model iMac you have and so it's hard to give specific instructions, but if you check in the User's Guide that came with it you will find the instructions for replacing and installing ram in your model.
If you no longer have the User's Guide you can find out by using the the following link.
http://support.apple.com/kb/HT1463
or the next one if it happens to be a newer glossy screen aluminum model.
http://support.apple.com/kb/HT1758
Dennis

Mac has snow leopard and does not boot has grey screen

IMac has snow leopard and does not boot has grey screen

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Boot failed: solaris server does not boot

Hi All,
one of my support person who has administrator previlages tried move the contents of root to trash directory, in the middle it got hung,and he had restrted the server.
Now the solaris does not boot. It says
boot failed
Enter Filename [platform/sun4v/kernel/sparcv9/unix]
and what ever we enter there it says boot cannot read.
Please suggest some workaround, nearly 200 users are down, actually it is our licnese server.

Hi,
What you could try is the following :
Boot the system from the solaris cd into single user mode.
Find out what the disk is you need to mount and mount it under /a
After you have done this you can see if you can move back the stuff that was moved from the root directory to the trash.
If that works then you could try and boot again from the disk to see if everything works again.
Nico

Windows Server 2008 R2 Does not boot When Back up drive removed

I have a windows Server 2008 R2 Standard server RAID 10 installed. I have a non raid drive installed as the backup HD. The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
a boot drive. I have been searching for solutions and cannot find any. Any ideas?

Hi,
Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
At current situation, first please test to connect the failed disk back to the device and see if it will help.
Or you may need to run a boot-up repair with an installation disk.
If you have any feedback on our support, please send to [email protected]

After installation of 10.6.5 system does not boot

After I updated my system with the latest release 10.6.5, the system does not boot up at all. It shuts down every time it restarts. All I can do is go into single user mode and then I cannot repair the disk as I always get the error that "The volume Macintosh HD cannot be repaired when it is in use"
Any other suggestions?

It sounds like your friend's DVD is hardware specific to his Mac and will not work in your Mac.
Since you say a safe boot work that generally indicates that the problem is with third party software because the safe boot prevent any of that from starting.
Allan

MSI P6N SLI V2 does not boot up from cd/dvd and few other problems

HI
I just bought a computer P6N SLI V2 + E6750. It has following problem. It does not boot from cd.
I have Sata HD. CD/DVD is installed to IDE as a master.
I have done settings in bios so that First boot is cd/dvd and second is sata HD. Anyhow it still goes to the hd and stars windows.
I was only able to boot up from cd when I disabled hd from boot sequency. Meaning I left only cd/dvd there.
Hopefully you pro's can help me.
Then there is another problem. Windows is telling me that it found new pci device. I do not know what device. I have only Graphig card (geforce 8800 gts) installed into pci-E. Drivers and software are also installed, I assume proberly. How to find out what windows thinks it found.
Third problem is onboard soundcard. I cannot get any sound out from the machine. I have downloaded driver from realtek, but still no sound.
Unfortunatelly I do not have original software for motherboard. Only the latest from MSI website.
Hopefully someone can help me.
thanks.

About bootup, i dont know yet.
To find out what windows found, look in devicemanager.
To go there go to controlpanel, system then choose devicemanager.
There you can see what's installed.
Last, your soundcards needs to be enabled in bios, under integrated peripherals there should be a line with "onboard sound", enable this and sound should work, unless its broken.

[SOLVED] ArchLinux does not boot if AC adapter is plugged in.

Well, actually it does not boot when AC adapter is unplugged too! When I boot ArchLinux it stops working (i.e. the screen becomes completely black without the chance to recover it) just after it says: "Waiting for UDev uevents to be processed".
The only workaround I found is to plug in the AC adapter before turning the computer on and unplug it exactly after it started booting the kernel. Otherwise it does not complete the boot process (as I said, it stops at: "Waiting for UDev uevents to be processed").
More, on KDE startup I always see a message concerning Power Management, but it is too fast and I cannot read it. If I go to System Settings > Power Management I see this notice: "Power Management configuration module could not be loaded. The Power Management Service appears not to be running. This can be solved by starting or scheduling it inside `Startup and Shutdown`". Do I have to add `powerdevil` to `Startup and Shutdown` as pre-kde startup service?
As for my configuration I have this modules in my rc.conf:
MODULES=(ac battery button acpi-cpufreq cpufreq_ondemand acpi)
The last one was acpid, but at startup it said it could not find that module, so I changed it to acpi.
Thank you,
rubik
Last edited by rubik (2012-07-23 07:31:25)

Ok, I tried and I got something
+ -------------------------- MODULES -----------------------------------+ Result +
| ac battery button acpi-cpufreq cpufreq_ondemand acpi | FAIL |
| battery button acpi-cpufreq cpufreq_ondemand acpi | SUCCEED |
| ac button acpi-cpufreq cpufreq_ondemand acpi | SUCCEED |
| battery | SUCCEED |
| ac | SUCCEED |
| ac battery | FAIL |
+--------------------------------------------------------------------------------+-------------------+
As you can see, it fails booting only when ac and battery are loaded together.
EDIT: With lsmod I can see nobody uses either ac or battery, so can I remove them from MODULES? This would solve the problem.
Mod Edit: I added code tags -- that output was just too ugly I took them back out, they did not help
Last edited by ewaller (2012-03-27 17:38:17)

Iphone 3 g does not boot cannot shot off Apple icon constantly on

Similar Messages

Maybe you are looking for