IPhone 3 I cannot get my pictures to download from iPhoto.  I keep getting the error message required file cannot be found.

I cannot get my pictures to download from my iPhoto from an albumto the iPhone 3 (one of the kids phones). I was able to download an Event.  I have changed the name.  I have used my iPhone 4 and the pictures from the album downloaded just fine. I have looked at the message board and I have deleted the cache and done all the things that were suggested.  WHAT IS THE DEAL!! I have been working on my phone and the kids phones for about five hours now and super frustrated!!! 

I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

Similar Messages

  • I am unable to sync my ipad..i get error message " required file cannot be found" can someone help?

    I am unable to sync my ipad..i get error message " required file cannot be found" Can you help me?

    Some things to try in this order:
    1) Make sure you designated the correct folders for music, etc.
    2) Press and Hold the Home and Power buttons on the iPad until the Apple Logo appears, about 10 seconds.
    3) Make sure all antivirus and firewalls are off.
    4) Delete and reinstall itunes. (Back up the itunes folder first.)
    Hope this helps...

  • Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."  And I have no idea of where or how to fix this issue.  Any help or suggestions will be greatly appreciated.  I even tried to deauthorize this computer and got the same error message.  HELP!

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

  • TS1702 I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what wrong i

    I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what's wrong as far as I know everything is up to date on the phone it is running slow please help thanx!

    I figured out what was going on the app had miss represented how much space it would take it had said it was 1.2g's however it was really 1.9g's which was all I had left on the phone I downloaded it to my computer first from the apps store then was able to see this. At that point I was able to rearrange some memory to accomadate it's size thanx for the help.
    Mick

  • Get error message "this "**" file cannot be attached until the files already attached are finished uploading" even when attaching 1 file

    I attached multiples .pdf files to an email. Tried to attach the next file before the previous 1 finished attaching. Got error message "this "**" file cannot be attached until the files already attached are finished uploading". Was never able to attach that 1 file to the email that I received the error message for; was able to attach subsequent files to that same email & send it. Now, I often get the same error message, even if I only attach 1 file & esp. when attaching .ai or .jpeg files. What can I do to fix this problem?

    It looks like nobody has an answer for this despite of the 80 something views!
    And here i thought Adobe admin would be monitoring the forum, but surprisingly, they don't even have the answer for this!!!

  • I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    iLife '09 is not available as a download - it is only available as a purchase
    iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
    Exactly what did you do? And exactly what does the error message say?
    On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
    LN

  • Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    Jennifer...
    Follow the instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • I get the error "itunes library file cannot be saved. An unknown error occurred (-50)."

    I recently installed iTunes on a new laptop with Windows 7.  Why do I get the error "iTunes library file cannot be saved. An unknown error occurred (-50)?"

    Have been able to resolve this issue?... I have just exeperienced it and not happy that I can't resolve it.

  • When I attempt to start my CyberLink YouCam, I get the error message that it cannot find a webcam

    When I attempt to start my CyberLink YouCam, I get the error message that it cannot find a webcam or that I need to make sure my webcam is turned on.  I see nothing in my documentation about how to turn on the webcam which is included with my laptop.  How can I successfully turn it on and use the CyberLink YouCam?
    HP Pavilion dv7-6b63us
    Window 7 64-bit

    Hi
    Testing a Webcam Using YouCam
    Testing a Webcam Using QuickPlay
    Testing a Webcam using Your Favorite Instant Messenger
    Click start in search type Recovery Manager then click on it select Yes on User access control then select I need immediate help then select Driver & application recovery select the Webcam driver and install it then restart the unit.
    Fixing Webcam Problems in Windows
    Incase you have the same issue please contact HP Technical support and get the Webcam replaced.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • When trying to restore an iCloud backup, I receive the error message "Appe-ID cannot be created. invalid device while updating mme delegate account".

    After a complete crash of my iPad 3 (WIFI only) because of updating to iOS 7.03, I try to restore my config from iCloud.
    I managed to get into the settings assistant and enter my Apple-ID (which is valid as checked via iTunes).
    But then I see the error message "Apple ID cannot be created - invalid device while upgrading mme delegate account".
    I have no clue what the mme delegate account is but need my data back.
    Any suggestions?

    All you need to do is restore the iphone in itunes as new
    and then set up as new
    after this is done
    then you can restore from itunes back up with out any error!!
    -Johnny

  • HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII  failed. can anyone help. I have been able to print on this printer for

    I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

    "/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
    I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
    2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
    Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
    Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
    (with thanks to Yuengdog1983):
    This issue may be a result of the Computer Name being left empty:
    Open System Preferences and choose Sharing.
    Enter a name for your computer.
    Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

  • Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents.

    Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents and I've run Repair on Microsoft Office.
     I don't know what else to try.
    Any help would be appreciated. Thanks.

    A hotfix request has already been submitted for this issue and we have also documented it here
    http://support.microsoft.com/kb/983097
    Thanks.
    Tony Chen
    TechNet Community Support

  • When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    Don't know if this will you but i fixed my issues with upgrading to 10.5.3.3 on Windows 7 you can access the steps i took here with an explanation of the problems i was having.  https://discussions.apple.com/message/17374864#17374864

  • Every time i try to update my ipod to the latest version of ipod software i keep gettint the error message "there was a problem downloading ipod software. The network connection timed out"

    every time i try to update my ipod to the latest version of ipod software i keep gettint the error message "there was a problem downloading ipod software. The network connection timed out"

    Most of the times your security software is the cause for the network time out: iTunes for Windows: Troubleshooting security software issues

  • I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

    I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch"  The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

    Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

Maybe you are looking for

  • Display Data Flow - Short Dump

    Hi all, When i select display data flow of any cube...it is going for a short dump. I have searched for the answer in previous Forum questions. I could find only for previous BW versions but not for for BI7. Could you please let me know the solution

  • F4IF_INT_TABLE_VALUE_REQUEST doesn't work

    I want to popup a F4 window for bank name accroding to vendor no. *declare internal table for bank data: begin of bk occurs 0,           no like lfbk-bankn,           curr like lfbk-bkref,           name like bnka-banka,           acct like lfbk-koin

  • Printing from XP via bluetooth to a shared printer on my iMAC

    As a novice MAC user, I want to be able to print via bluetooth from my XP Laptop via my iMAC to my printer. I have paired both devices successfully, shared the printer on the MAC but cant see it on my XP Laptop. I must be doing something wrong. Anyon

  • How to determine most recent date from the date column of internal table

    Dear friends would you like to tell me. how i determine the most recently changed record by looking at date and time from internal table i am not supposed to sort the table by date and time... I must check date and time with other records date and ti

  • Where can i find the multimedia touch screen software for ideapad-s10-3t

    i have and ideapad-s10-3t and i had to format it but now im looking for all the software from lenovo that came with it like the multimedia that work with the touchscreen i alredy finde the  directshare veryface verytouth