Iphone 3 loss of correct time and date

I have lost the correct time and date on my iphone 3 os 4.2.1 Cant reset by reloading world clock. Cant afford to lose data. Wont synch with computer or itunes because incorrect time. Icloud not available on this model. So how do I reset date and time? Any ideas please?

Hi J.Walsh1,
Welcome to the Apple Support Communities!
I understand that you would like help setting the correct date and time on your iPhone 3 running iOS 4. Please refer to the Date and Time section of the attached iOS 4 User Guide (page 198) for assistance. 
manuals.info.apple.com/MANUALS/1000/MA1539/en_US/iPhone_iOS4_User_Guide.pdf
Best regards,
Joe

Similar Messages

  • UC320: how to set (correct) time and date, upload own AA messages, get caller ID, telnet?

    Hello there,
    Just trying out the UC320 I got borrowed from Cisco AT for testing with firmware 2.1.2 (1) localized for Austria.
    The device is connected to the cable modem of my ISP (Kabelsignal) utilizing two FXO ports, getting an IP address from my DHCP being connected to a WS-C2960G-24TD (LAN 1@UC320 connected to Gi0/18@C2960G port macro Cisco Switch enabled).
    Now I would like to try/see the following features:
    - a correct time and date: huh? hwo/where???
    No option to set this right??? No NTP option??? Am I just blind or too stupid to find that option/s?
    - upload own messages for the AA: ok, there are german messages but someone might have a little bit personalized ones - maybe telling callers the company name before asking them to dial the extension if they know it. Making custom messages is not the problem - but how to upload and in which sound/data format?
    - caller ID: my ISP told me that he transfers the caller ID correctly to analoge end devices if caller ID is available and not suppressed. All I can see when a call comes in is which FXO Port is being used by that call. So callback entries on the SPA phone is senseless. Any advise?
    - CLI: You can telnet the device - but which credentials to use to successfully logon? The pre-assigned credentials form Cisco AT are not accepted for logon.
    BTW @Cisco guys: I am also voting for support for the older SPAs (e.g. 942)

    Hi Claus,
    Thanks for giving the UC320W a spin and glad you found the support community!  Let met see if I can help answer your questions....
    Time/Date & NTP -- The UC320W is preconfigured with Cisco's Small Business NTP server.  The preferred method for correct time you will need the UC320W WAN to be connected with Internet access.   If there is no WAN connectivity there is a feature in the 2.1.x firmware where you can set the time on a SPA phone GUI and it will then update the system time.  Alternatively, if you have a LAN side NTP server that is on the same subnet as your Data VLAN subnet, you can use the NTP.pmf file found here:  https://supportforums.cisco.com/docs/DOC-16301
    Upload custom Music on Hold and Auto Attendant prompt files.  We are currently in beta of a new Cloud service.  To participate in the Beta, please send an e-mail to [email protected] requesting MoH/AA Custom files Cloud Beta participation.
    Caller ID on FXO:  Make sure that you have run the impedance matching tool on each of your FXO ports.  For additional information on running the Impedance Matching tool and Caller ID troubleshooting, please see the UC320W Troubleshooting Guide.
    CLI access -- This is for Cisco Support personnel only for low level debugging.  This is not a IOS based device and there is no command line access for provisioning.
    Cheers,
    Chris

  • Iphone 5 wont keep correct time and date

    Any one else have the 5 through Verizon? It wont keep time and date correctly. Verizon keeps telling me it's Apple's problem, Apple tells me it's Verizons! Getting the Royal runaround! About to throw it in the lake!

    Hi J.Walsh1,
    Welcome to the Apple Support Communities!
    I understand that you would like help setting the correct date and time on your iPhone 3 running iOS 4. Please refer to the Date and Time section of the attached iOS 4 User Guide (page 198) for assistance. 
    manuals.info.apple.com/MANUALS/1000/MA1539/en_US/iPhone_iOS4_User_Guide.pdf
    Best regards,
    Joe

  • My iPhone don't keep correct time and date and won't factimeō

    mmy iPhone 5 won't keep correct date time or let me face time

    Are you talking about the clock on the lock screen only.  Have you checked to see if the time on other Apps is actually coronet?

  • How do I reset the FP-2000 to the correct time and date through labview??

    I have blundered through most of my other issues, this is one of the holdouts. Can someone please help me out?

    I ran into this problem some time back. I asked the NI Engineers for a solution and they sent me the attached zip file. Although, after some discussions we realized that the FP module is set on GMT time. Therefore, I had to create a vi that would correct for local time (GMT to Local Time). I use this vi locally on my FP-2010 network module. It converts the time on 2010 (GMT) to Local time for time stamping my data. Good luck...
    Attachments:
    SETTIME.ZIP ‏156 KB
    GMTLocalTime.vi ‏53 KB

  • My mac app store cannot get a secure connection although my internet is fine and i have the correct time and date. I cannot get onto the app store to update. It just keeps saying cannot make a secure connection do i want to continue anyway

    see above

    This procedure is complicated, but you probably won't have to do all of it.
    Take each of the following steps that you haven't already tried until the issue is resolved. Back up all data before making any changes.
    Step 1
    Check the status of the service. If it's down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Check that the date (including the year) and time shown by your system clock are correct.
    Step 3
    Restart your router and your broadband device, if they're separate.
    Step 4
    If you connect to the Internet through an HTTPS or SOCKS proxy server, follow the instructions in this support article, or deselect the proxy entirely.
    Step 5
    Boot in safe mode and test.
    Step 6
    Make sure Parental Controls aren't active for your account.
    Step 7
    Follow the instructions in this support article to change your DNS settings. If there's no change, revert the settings.
    Step 8
    If possible, test on a different network, such as a public Wi-Fi hotspot or the cellular network of your phone.
    Step 9
    Launch the Keychain Access application. In the Keychains list, there should be items named System and System Roots. If not, select
    File ▹ Add Keychain
    from the menu bar and add the following items:
    /Library/Keychains/System.keychain
    /System/Library/Keychains/SystemRootCertificates.keychain
    From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
    When using this certificate: Use System Defaults
    Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings. Never again change any of those settings.   
    From the menu bar, select
    Keychain Access ▹ Preferences... ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
    Next, select the login keychain. Delete any expired or otherwise invalid certificates.
    Log out, log back in, and test.
    Step 10
    Launch the Activity Monitor application. Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter "ocspd" (without the quotes) in the "Filter" text field. Is a process with that name listed?
    If not, back up all data, then triple-click anywhere in the line of text below on this page to select it:
    /var/db/crls
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Move all the files in the folder that opens to the Trash. You’ll be prompted for your administrator password. Reboot, empty the Trash, and test.
    Step 11
    If you've moved to a different country, select
    Store ▹ View My Account
    from the App Store menu bar, then click
    Change Country or Region
    and update your billing information.

  • IPhone 4S time and date keeps resetting, despite being set to automatically do so.

    After having recently upgraded my iOS to 7.0.4, my Verizon iPhone 4S has started to re-set the time and date every now and then at random. It does this, despite me having my Settings set to automatically set the date and time based on my location. I have called Verizon about this and all they had me do was to reset my network connections and reset my roaming capabilities...and despite me doing that this morning, the time re-set itself again this afternoon. I have found the only solution has been for me to power off my phone completely and then once on again, set the phone either into Airplane mode for a second - or to just wait until the Verizon signal switches the phone back to being the correct time and date on its own. I have also found that these issues have started to affect my ability to send and receive iMessages, as well. For some reason, when the date/time re-sets, the iMessage option becomes un-selected and I have to manually go back and turn that functionality back on. Anyone else having these same issues? It's incredibly frustrating and I'm not sure what else I can do save for constantly hard, re-starting my iPhone everytime I notice the time and date is out of whack. Also it's hard for me to tell if this is an Apple hardware issue/bug that just needs to be fixed - or something to do with Verizon. Any tips/info would be appreciated.

    Try setting your time to manual. This way, the iPhone is the one controlling the time. As you correctly understand, when it is on auto, it is controlled by Verizon and their individual towers. If after setting the time to manual it works, then I would say it isn't a phone issue, but a Verizon one. Do you frequent the same area when this occurs? It could very well be an issue with a particular tower in your area and Verizon would need to check that. If the time goes off again while on manual, then it could be the phone. User troubleshooting is restart, reset, restore from backup and restore as new. Try each in order until the problem is fixed. If it cannot be, then make an appointment at the Genius Bar at Apple to have the phone looked at for hardware issues.

  • Time and Date not correct

    Hi to all.
    Does anybody know how to save your cmos settings to a floppy or CD?
    Is there a program that can assist with saving the cmos settings to floppy or CD?
    Is there anyway to perform saving the cmos settings within the BIOS to floppy or CD?
    I really don't want to go into the BIOS and write down all that info.
    I have an HP Pavilion 553w that is 7 1/2 years old, running windows xp home edition version 2002 sp3, 2 gbs of ram, AMD athlon(tm)XP 2100+ 1.73 GHZ, bios version/date Phoenix Techologies, LTD AM35308, 10/07/2002 (Phoenix-AwardBIOS CMOS Setup Utility) SMBIOS 2.3, BIOS Core Version V6.0, BIOS Revision 3.08 10/7/2002.
    I know my computer is ancient and I probably should have updated my BIOS, as it is out of date.
    Also, after starting up my computer I noticed my time and date is not correct and as of lately have to adjust the time and date to the correct time and date.
    I did some research and came across some possible reasons:
    1. RTC battery (CMOS battery) may need reseating on motherboard.
    2. The battery has become corrupt.
    3. BIOS version may be out of date.
    My computer is really taking longer than usual to startup and images of icons take longer to display, which may be a sign of the symptoms I listed above.
    My computer doesn't have any malware whatsoever, clean as can be.
    Any help or advise will be truly appreciated.
    Jboman
    This question was solved.
    View Solution.

    Jboman,
    There is not need to save CMOS settings unless you changed the default BIOS settings.  A bad CMOS battery will not preserve the settings.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How do I make the time and date stamp correct for my documents, songs in itunes, etc.

    No matter when I add a song or save a document it says it was added/saved on 1/5/2011. It would be great if somehow I could get back the dates and times that things were added, but I know that may be impossible. I just want a way to have the correct time and date stamp from now on. Finally it wasn't always like this, when I first got the computer everything was correct, I just started noticing it. Additionally my clock is correct, so I don't understand why things aren't saved according to the clock. Thanks in advance

    Resetting your Mac's PRAM and NVRAM

  • Time and date reset bug

    hu guys, recently ive been experiencing a time and date reset bug, sometimes when i open up my computer it says something like your date is set to (i forgot the exact date but the year is 2001) so i change it back to the correct time and date, im not sure how i got the bug, can anyone help me fix this problem, its beginning to be annoying. thanks in advance!!

    Sherwin,
    Those symptoms indicate that you need to get your backup (PRAM) battery replaced.If your computer does not retain parameter RAM (PRAM) settings when it is turned off, this generally indicates that the battery needs to be changed.;~)

  • When changing appointment on outlook after time they back on original time and date

    I have user that when makes a change to a meeting and sends the update to the recipients, they get the new meeting request and it updates on their calendar with the correct time and date. Then for
    a brief time or past  day the senders calendar will show the change then disappear and the original time and date pop back up again on all users get the meeting.
    Time zone on all pc's same, date/hour correctly.
    All with windows 7 + Outlook 2010 (+ sp1, full update).
    I have Exchange 2013
    any help and tips will be appreciate
    Thank's

    Hi Rdanny,
    Do you mean both Organizer and Participants' meeting back on original time and date?
    Does the Organizer give others delegation permission?
    Does this issue always occur or just once?
    How about changing time in OWA? If you didn't try it, please try to change the meeting time in OWA for testing.
    If in OWA, this issue disappeared, it seems an issue on the Outlook client side.
    I suggest run Outlook under safe mode to avoid some AVs and add-ins.
    I suggest try to re-create the Organizer's profile to refresh the caches.
    Also try to check whether there is any related error message in the App Log.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

    Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

    Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac.  If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
    Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

  • Iphone 5c time and date

    My iPhone 5c time and date do not display properly even though it's set to "Set Automatically" under Date & Time in the settings. My time zone is set to the correct zone as well. I've tried restoring the iPhone as a new phone and also from backup and nothing seems to work. Any ideas?

    Settings --> General --> Date & Time
    Is set automatically On?
    is your time zone correct?

  • I am trying to find an app that will track the usage on my iphone with times and dates to see what was accessed on my phone when I was away from it and what if anything was done eg deleted messages viewed facebook etc?

    Hi! I am trying to find an app that with track everything that is done on my phone with times and dates? im not really woried about call usage and texts sent I need it to view what has been done - for example:
    Messages received
    Messages deleted
    Facebook viewed
    Messages viewed
    Internet viewed and what?
    I just have an issue with someone using my phone - I used to track this through double clicking the home button and roughly knowing in what order I had been on things but they have sussed this one!
    Thank you!!

    No way to do that on a non-jailbroken iPhone. Why don't you just passcode protect your phone? That way no one but you can use it...unless they know your passcode.

  • TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

    When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

    I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work.  i can't find an automatic update of time zones on my itouch to turn this off.

Maybe you are looking for