Iphone 3G 2.2 earpiece not working HELP PLEASE

Hi, suddenly my iphone earpiece it´s not giving me sound. When I recieve a call people can hear, but I can´t. Also with the voicemail, I have to use the head phones, or the bluetooh. The only way to speak in a conversation with out the head phones it´s to use it in speaker mode. I have tried everything, plug and unplugged many times the headphones (it recognize the it doesn´t have it because when I put it out it says ringer and no headphones ringer in the iphone when I change the volume). The ipod part is working correctly, when I recieve a call or make a call, it stops. The mic is working fine.
Can somebody help me to find where can be the problem? I already reset it, two times, try the plug and unplugged thing, clean the jack trail

No, I restore the phone to factory setting already, I didn´t make the back up, I put as a new iphone, and try to use it with no extra apps, and still not working, how does this part can get damage and everything still working correctly?, I still using it as a phone with the headphones when I not alone and with the speaker when nobody is around, I don´t have an apple store near me, so I have to send it to them by mail, so, I want to do everything I can before to do that.

Similar Messages

My iphone 4 automatic lock is not working help please

hi there
my iphone run out of charge very rapidaly and also turn it self off time to time , and when i set auto lock for example 1,2,5 ect minutes it does not work at all

Do you have a protective case on the iPhone, maybe it's interfering with the auto-lock?
If that isn't it, try restarting or restoring the iPhone.

On my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

on my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

Could you please describe how you are trying to delete a single text message and it will not work? What are you seeing in place of the trash can icon?

HP pavilion dv6 microphone not working . help please . . .

HP pavilion dv6 microphone not working . help please . . .

Hi,
DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
You may wat to try this first:
1. Right click speaker icon (right hand corner)
2. Select Microphone devices
3. Right click Microphone
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can only sync iPhone/ipad through USB now not WiFi - help please?

can only sync iPhone/ipad through USB now not WiFi - help please?

Hi Iron Tommy,
If you are having issues syncing your devices to iTunes via WiFi, you may find the troubleshooting steps outlined in the following article helpful:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/ts4062
Regards,
- Brenden

HT201210 I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

Hello

I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

TS2755 When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

Try closing all apps in Multitask Window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen

IPhone 6 Plus mic/earpiec not working.

A tiny drop of water went down into my earpiece 2 weeks ago and i kept sucking out the water and i left it over night in a bag of rice. The next day the earpiece was working perfectly fine but the mic for the front facing camera, facetime, siri and voice dictation is not working. Every time i try to take a video using the front facing camera all what i hear is a muffling sound. Is this an earpiece issue? Should i change the earpiece? IS there a mic inside the earpiece?

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

HT1212 I tried doing the itunes method to unlock my iphone 4 but i did not work, help!

I did it & did not work i'm still locked out. what can i do to try to unlock it now??

I'm sorry, the only time that you have to restore as new is if you are trying to restore because of a forgotten restrictions code, or if you have never synced the phone via iTunes before. Read the support document http://support.apple.com/kb/HT1212 and makes no reference to not using a backup if you have synced the phone in the past.

Wireless not working HELP PLEASE

Just today my wireless was working perfectly not problems at all. And then i get back from college 4 hrs later and it seems to not work anymore i called cisco and they want to charge me to fix it, and i dont have the money for it. I have tried reseting the router (pressing the small button with a paper clip for 30 seconds). And i have also unplugged it and plugged it back in and still nothing. I called my internet provider and my modem is working fine (im actually writing this with my laptop plugged straight into the modem via ethernet). Could you guys help me out? exams are coming up and i cant keep taking turns using the internet with other people in my house, and i cant keep going to the library to study and do homework. Thanks, you have no idea how thankful ill be if this gets resolved btw i have a cisco linksys E2500 series wireless router
Solved!
Go to Solution.

If you have an extra ethernet cable you may reconfigure the router manually. For step-by-step instructions you may check it out from homesupport.cisco.com. You may also download the setup wizard from this website.

Ipod mini not working HELP PLEASE!!!!!

my ipod mini is showing the apple logo, a sad face and then a battery sign with a fire bolt when i try plugging it into the computer. also, my computer wont recognize it at all. I've tried resetting and restoring it many times but its not working. what should i do!?!?!?!?! I've tried to make an appointment with the Genius Bar but they are too busy and my warrenty expires really soon!!
HELP!!!!!!
ipod mini Windows XP
ipod mini Windows XP

Hi Ssh,
Welcome to Apple Discussions
You may want to look at...
Knowledge Base Document #61711 on iPod missing in "My Computer" or in iTunes on Windows
Knowledge Base Document #93499 on Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
Knowledge Base Document #61003 on iPod shows a folder icon with exclamation point when you turn it on
Knowledge Base Document #61584 goes over When the iPod Only Shows an Apple Logo and Doesn't Start Up
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Youtube not working help please

i am using macbook pro retina for 1 year now but just a few days ago youtube stopped working suddenly and i thought it was because the site was down or something but i have checked that and found that it is not working just in my macbook
when i open youtube it shows a html format please help guys i have attached the photo ive reinstalled google chrome ,and also flash player with no respite

Go step by step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
3. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
4. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click “Remove All Website Data”.
5. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.

HSRP on 2 3550's not working, HELP please

Hello Everyone,
I am attempting to run and test HSRP but there seems to be some errors.
My first switch is a Catalyst 3550 - 48 Port with SMI image
My second switch is a Catalyst 3550 - 48 Port with EMI image.
I configured HSRP on Vlan12 to try and see if my second switch will take over once I pull the cable out of the first one but it seems like it doesn't.
In the "show standby" command, the second switch shows as "Active router" because I gave it higher priority and it sees the neighbor switch which shows as standby router, so hsrp sees both the switches, knows which one is active and which one is standby but yet when I pull the plug on the first one, network is down, as if it did not revert to the second switch.
My cabling is as follows.
First switch has the first GIG (over fiber) uplink to my provider, the second GIG port is connected to the second gig port on the second switch over fiber as well. The first gig port of the second switch is NOT connected to anything as I only have one provider.
The two ports communicate since hsrp seems the neighbor switches.
The two are configured like this 10.0.0.1 s virtual gateway. 10.0.0.2 is the address of first switch. 10.0.0.3 is address of second switch (backup one). Those IP's are on a MANAGEMENT VLAN which I gave as VLAN ID 100
Now for the VLAN12 I am testing HSRP on, it has VALID INTERNET IP's and not local internal IP's.
Once again, the virtual IP finishes with 225, and I configured 226 as IP on switch1, 227 as IP on switch2.
I am NOT using the track option as I am not sure what it does, I only use the standby priority and preempt options.
So to put it in brief, I am trying to make VLAN12 work with HSRP so that all traffic from VLAN 12 enters switch 1 (from the provider uplink) goes to switch2 since I set vlan12 with higher priority (hsrp) on switch2 goes to the servers, then comes back to switch2, routes to switch1 (since it has to uplink to provider) and out to the internet.
I hope my formatting is not very bad and pretty much understandable.
Can someone please tell me what I am doing wrong and why is hsrp not working for me?
PS: I am suspecting the routing is not done well between one switch and the other so they cannot communicate the traffic, but I am not sure
Please help me
Thank You

Hello,
Ok I am copy and pasting the configs of INTERFACE FASTETHERNET 12, VLAN12 and SHOW STANDY on BOTH 3550's...
NOTE: Port 12 is not connected at this point on standby 3550 to the 2950t anymore as I have disconnected the cable since it was not working, this is why there are less details for interface fast ethernet port 12 on standby switch, if you need full details I can give you more details once I connect it again, even with it disconnected, show standby shows the standby 3550 as active for Vlan12, but yet vlan12 operates out of active 3550 even when port 12 was active on standby one.
For privacy reasons, I have XXX'ed the IP's
Here is the data:
--- ACTIVE 3550 -----------------
interface FastEthernet0/12
description Switch 8 Uplink
switchport trunk encapsulation dot1q
switchport trunk native vlan 12
switchport trunk allowed vlan 1,3,12,100
switchport mode trunk
mls qos trust cos
macro description cisco-switch
auto qos voip trust
wrr-queue bandwidth 10 20 70 1
wrr-queue min-reserve 1 5
wrr-queue min-reserve 2 6
wrr-queue min-reserve 3 7
wrr-queue min-reserve 4 8
wrr-queue cos-map 1 0 1
wrr-queue cos-map 2 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
spanning-tree link-type point-to-point
interface Vlan12
ip address 2XX.XX.XX.226 255.255.255.224
no ip redirects
standby 12 ip 2XX.XX.XX.225
standby 12 priority 95
standby 12 preempt
Vlan12 - Group 12
State is Standby
4 state changes, last state change 1d08h
Virtual IP address is 2XX.Xx.XX.225
Active virtual MAC address is 0000.0c07.ac0c
Local virtual MAC address is 0000.0c07.ac0c (v1 default)
Hello time 3 sec, hold time 10 sec
Next hello sent in 0.068 secs
Preemption enabled
Active router is 2XX.XX.XX.227, priority 110 (expires in 7.508 sec)
Standby router is local
Priority 95 (configured 95)
IP redundancy name is "hsrp-Vl12-12" (default)
Vlan100 - Group 10
State is Active
2 state changes, last state change 2d03h
Virtual IP address is 10.0.0.1
Active virtual MAC address is 0000.0c07.ac0a
Local virtual MAC address is 0000.0c07.ac0a (v1 default)
Hello time 3 sec, hold time 10 sec
Next hello sent in 0.064 secs
Preemption enabled
Active router is local
Standby router is 10.0.0.3, priority 100 (expires in 9.608 sec)
Priority 150 (configured 150)
IP redundancy name is "Hsrp-Vlan100" (cfgd)
---- STANDBY 3550 -------------------------
interface FastEthernet0/12
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,3,12,100
switchport mode trunk
interface Vlan12
ip address 2XX.XX.XX.227 255.255.255.224
no ip redirects
standby 12 ip 2XX.XX.XX.225
standby 12 priority 110
standby 12 preempt
Vlan12 - Group 12
Local state is Active, priority 110, may preempt
Hellotime 3 sec, holdtime 10 sec
Next hello sent in 0.126
Virtual IP address is 2XX.XX.XX.225 configured
Active router is local
Standby router is 2XX.XX.XX.226 expires in 7.756
Virtual mac address is 0000.0c07.ac0c
2 state changes, last state change 1d08h
IP redundancy name is "hsrp-Vl12-12" (default)
Vlan100 - Group 10
Local state is Standby, priority 100, may preempt
Preemption delayed at most a further 0 secs for syncs
Hellotime 3 sec, holdtime 10 sec
Next hello sent in 2.348
Virtual IP address is 10.0.0.1 configured
Active router is 10.0.0.2, priority 150 expires in 7.752
Standby router is local
1 state changes, last state change 2d03h
IP redundancy name is "Hsrp-Vlan100" (cfgd)
Hope this helps you experts to help me :)
Thanks

Iphone 3G 2.2 earpiece not working HELP PLEASE

Similar Messages

Maybe you are looking for