IPhone 3g and aux port
Hi Everyone,
I bought an 3.5mm cable to connect my iPhone to the Aux port on my car's radio. The playback works but only seems to play from one speaker. Is there a setting on the iPhone that I'm missing or do I need to play around with the settings on my car stereo?
Thanks
It was a cable issue. The cable I had was mono not stereo. Got the correct cable and it's working fine
Similar Messages
-
Do 4th gen shuffle's play through car's aux port with male-to-male cable?
I have a 4th gen shuffle and male on both ends cable to plug into shuffle and aux port in car. I cannot, however, seem to get it to play any songs. I was able to play a first gen. nano through same aux port, but not the shuffle. Are shuffle's even able to play through car's aux.?
Thanks for the feedback JfromPtbo. I finally figured it out, and the solution was pretty simple. You have to turn the volume ALL the way up on the shuffle (not just a few clicks, but really hold down that volume-up bottom), while it's plugged into the aux port. Then, once you hear the songs, you can adjust the volume through the normal stereo volume controls. Sounds good for a $50 ipod and $5 cable.
-
Perhaps someone can respond to my issue with not being able to get my iphone to work through my vehicle's Auxilary Jack.
I bought a Monster Cable kit for Ipods. It is used to plug into your ipod then into your vehicle's Aux. port. Well it works perfect on my regular Ipod.
However it does nothing when I try it with my Iphone.
Any suggestions?
Thank you,
Robbie
[email protected]I bought a Belkin cable
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nnmm=br owse&mco=EEBCC376&node=home/iphoneaccessories/cablesdocks
and have no problems. Maybe Monster doesn't work with the iPhone. -
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?
Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/ -
How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.
In most cable systems, the router you have will plug into your modem and just work automatically. A NAT (Network Address Translation) router takes your external IP and hands out LAN (Local Area Network) based IPs. All of the devices you are working with right now should handle the change automatically unless you've changed from the default automatic configuration.
The problem with your wireless end of this is that the iPhone is not yet 802.11n, only 802.11g. Because that router is not dual band, all of your wifi devices will be forced to slow down to 802.11g speeds. This won't matter much for each device that's connecting to the internet, as your bottleneck is still going to be there. Where you will see slowdowns is device to device connections, like transferring data between the devices. -
HT201412 my iphone is showing only i tunes logo an arrow and usb port on the screen
my iphone's screen is showing logo of itunes ,an arrow and usb port.its not responding
This means you need to connect your iPhone to iTunes on your computer via USB and restore.
-
When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows
Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
while updating iOS 5 my iPhone responses nothing but logo of iTune and USB port, now what can I do?
Do just like the diagram indicates: connect your phone to your computer, open iTunes on the computer and then restore.
-
I bought a new iPhone 6 and switched carriers and am trying to get my voicemail and instant messages ported over to the new phone
Restore from your backup. For voicemail contact your cell phone provider.
-
I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?
The iPod feature that plays through USB in my car does not work with my iPhone 6 either. I called AppleCare and they said that the car audio system will need a firmware update. Don't know if Apple is just passing the buck, but that is what I was told. Thank you for posting. I know now that I am not the only one. Thanks also for posting about the iPhone 5 running iOS 8. I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6. I guess I will just be using Bluetooth in my car, at least for now.
-
Hello! I want to sell my iphone 3g because i have 3gs- i cleared the info in settings and now have black screen saying no service and usb port pointing to itunes - is that all i do ? i am pretty ignorant of computers- lol- i had read that i need to plug it back into itunes to verify it has all cleared out- i want to sell it on craigs list or ebay- i am really hurting for money right now- all your answers appreciated...
It needs to be restored by someone. You can do it, and set it up as a new phone, or the buyer can do it.
-
UK: activate iphone now and port number later
i'm going to go and get an iphone tomorrow but i don't have my PAC number yet from vodafone.
does anyone know if i can activate it now and get a temporary number from O2 and then port my number across in a few days time?Yes. You will get issued a number to use, then once you have your pac this will take a few days to update your phone to your old number.
I intend to use the initial number to verify how good the O2 signal is in my area before porting, because if the signal is poor then you have 14 days to return the phone for a full refund. -
IPhone 4s will not play through AUX port in car after iOS 6 upgrade
I have a friend who can no longer play music from her iphone through the Auxiliary port in her car. She had been able to do this before the iOS 6 upgrade. In fact, when I checked using a portable speaker, the music did not play.
I researched this and found lots of cases, but no solution. I was surprised to find that there were some users who had experienced no problem.
Is there any wisdom out there on this curious issue. Unfortunately, I do not have the iPhone available for immediate testing of any suggestions. I can relay information to my friend.
TIFdoes it play out of headsets?
maybe the detector is stuck so they don't detect anything connected
this is not uncommon and the fact that it happened around the time of an ios update
can be a much pure chance as it happening while a black cat crossed the street -
I cannot charge my iPhone 4 and cannot get my computer to register when I plug it into a USB port so cannot sync it either. I suspect the problem is with the 30 pin port on the base of my phone. Can this port be cleaned just in case there is 'fluff' or some other foreign material in there?
Try disabling all security software and firewalls, then try again.
Or try from a different computer.
This error is a pain in the butt and a new issue, too. I'm sorry.
Maybe you are looking for
-
Unable to find "Adobe PDF" resource files
I get this error when trying to merge several files into one PDF document. The files are a mix of JPG, PDF and DOC (Word 2003 running under Windows 7). It fails with the Word file but converts the rest. Where do I find the missing resource files? I h
-
Premiere cc not displaying video new update
anyone else experiencing that some video isn't showing up in your play back window after this recent update?
-
Hi all, For some reports, I cannot precompute some values and I need user input. For this I want to use table funcitons but I need to be able to get paramter values from user. Is it at all possible to prompt the parameters, or there can be a workarou
-
Help with PKGBUILD for PyCharm Professional
All, I recently took over this package as it was not being maintained regularly. I'm new to this, so I updated the obvious fields so everyone could get the most up to date PyCharm Professional out there. I have received some feedback, but wanted to
-
Cisco Secure ACS and Windows NLB
Hi, I have two ACS servers and have been trying unsuccessfully to setup Windows NLB for them. I can successful setup the NLB but ACS won't respond on the clustered IP. Other services running on the clustered IP will respond so I believe the NLB is wo