IPhone 3G Case with Sliding Lens Cover?

I've seen several cases that tout a "lens cover" feature, but all they seem to be are a clear plastic shielding to protect the surface. This doesn't change the fact that if you touch it or if dirt gets on it, it will make your pictures look bad.
Has anyone found an iPhone 3G cover that actually has a sliding lens cover? Seems like a no-brainer, but I cant find a single one after a Google search.

Yep, thats the one I ended up getting. Its not meant to protect, its more of a macro lens for sharper close ups, but it serves the purpose. And even with the 3GS's auto-focus, this extra lens still seems to help take a sharper pic at close ranges. Its a bit bulkier than I had hoped, but it will keep my lens clean.
Thanks for your reply.

Similar Messages

  • IPhone 4 case with extra battery

    Hello, i am wiling to buy a case with extra 1900 mah battery ( a polymer case with a battery included on the bottom of the case with on-off switch and four power indicator leds). I just wanted to know if these are so efficient like they say.

    Yes I saw the Mophie in the Apple website but too expensive here, it retails 65 euros (84 dollars) and checking on Ebay I found other models with the same specs for 20 bucks. My battery seems to work fine, the problem is here where I live, the coverage is not very good and the phone drains most of the battery everyday trying to get range all the time, so using it normally my battery is flat at 7 or 8pm very frecuently. I think one of these extra power packs would help.

  • Anybody adapt a iPhone case with or without Cover for a Z

    I recently bought a Zen. I wanted to try out a case before buying out, but haven't been able to find a case in a store.
    Last night I was looking at MicroCenter for a Zen case and I found an iphone case.
    I like it, but I wish it had a cover.
    http://www.griffintechnology.com/products/elansleeve
    It comes with a plastic sheet to install on the Zen and is very close to the same size.
    Zen Size WxHxD:? 3.26" x 2.6" x 0.44"
    iPhone Size WxHxD:4.50" x 2.40" x 0.48"
    So, the iPhone is over an inch longer,? just under a quarter of inch taller, and only 4/00ths thicker.
    Since the Zen has a landscape orientation and iPhone has a portrait orientation, you need to switch their definition of height and width. I like it because it comes clip that will work portrait or landscape, but I do wish it had a cover.

    You never stated anything earlier about Compass so I was talking about the magnetic case not having an effect on the iPhone itself. If you are attempting to use Compass of course that will have an effect since there is no way for the weak magnetic field of the earth to override the magnetic field of the case. So if you want to use Compass then don't use the magnetic case. If you want to use the magnetic case then don't use Compass. Simple.
    You can't have it both ways.
    I still stand by my original position the magnetic case will not effect the iPhone.
    Allan

  • IPhone 4 Case WITH Screen Protector

    what case do you guys recommend to use WITH a screen protector?
    I read that a lot of the cases will cause the screen protector to peel up on the edges thus causing bubbles
    thanks

    I personally wanted a case that is as slim as possible. My preference was not to ruin such a cool, contemporary design with a bloated case that looks like the Michelin man is hugging your iPhone. So, I chose this one (screen protection kit is included): http://bit.ly/dzJx89

  • Seeking iPhone 3G case with belt clip

    I'm looking for case for my iPhone 3G with a belt clip. If you've purchased such a beast, could you let me know which one, how happy you are with it and where it was purchased?
    Thanks!

    I have both a Marware Sportsuit Convertible, and a Marware CEO Sleeve, prefer the CEO Sleeve. Bought both at the Apple Store.

  • Will an iPhone 5 case with a Bumper Protector fit an iPod 5?

    Hi:
    I have an iPod 5G, do you think this case will fit? Thank you so much
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140884627902

    The iPhone is thicker than the iPod. The iPod might be too loose in the iPhone case.

  • N95 problems with lens cover

    I'm reading about issues with the lens cover of the N95.
    It appears that when you open it, sometimes it doesn't work properly.
    opening the shutter caused the app to load, but no video from the camera showing up, and the settings icons are leaving a trail on the screen when they slid open.
    It is happening to me as well.....
    Is this a know issue, and if yes, how can it be resolved?
    I understand that even if i change the phone, it won't help, as it is a flaw in the design ?
    Any help would be nice

    Will it never connect or the the connection closes afther a while?
    In the first case it can be two things.
    1. The headset has reached the maximum amound of connections. Max os often 7.
    2. The BT profiels are diffrent. Nothing you can do.
    If the connection closes it's your Nokia phone. The nokia profile difrens from the one of the motorola. The refresh time is difrent.
    Hope I helpt.
    Drunken

  • IPOD CASES WITH MAGNETS

    i have often heard (i still don't know if it's true...) that magnets are very dangerous near your computer or hard drives. i want to purchase an ipod case with a flip cover that contains magnets in it. has anyone had a problem with a case like this or is this sort of thing alright?

    case with magnet button or whatever?
    you should be fine, never had problems

  • IPhone Solar Case - Where to buy?

    I'm looking to buy an iPhone Solar Case WITH A BELT CLIP.
    Where can I purchase one here in the United States.
    Every case I have seen doesn't come with a Belt Clip.

    doing a simple google search shows you can get them from amazon.com

  • Anyone else notice iPhone 5's lens cover is uneven or tilted?

    I received my pre-order black iPhone 5 on launch day (9/21/2012). I love it!
    However, I noticed that when I pull the iPhone 5 out of my pocket there is often lint sticking out of the lens cover for the iSight on the back.
    This morning upon closer inspection, I noticed that the lens cover is slightly tilted downwards.
    It is visible to the eye, but it is especially noticeable when you run a finger across it.
    I notice that the top of the lens cover is completely flush while the bottom is slightly less than flush. It is tilted inward, below the surrounding glass.
    Does anyone else notice this? Is it perhaps just how it is designed?

    I went to a Genius Bar appointment and after waiting 45 minutes a genius replaced my iPhone 5. In fact he replaced another one at the same time. He handled both of our cases simultaneously with an iPad away from the Genius Bar.
    I'm happy with my replacement. He said it was a brand new phone, not a refurb. However, I inspected the replacement iPhone in store and I found a knick in the beveled edge and a scrape about 1cm long on the side of the iPhone. I decided that I'd rather have a couple of scrapes than a recessed camera lens. Once I got home and had it under better light I found dust under the lens. So overall I'm disappointed but I'm 99% satisfied with my device and its not worth the hassle to get a another replacement. I think there are definite quality control issues with the new iPhone, though.

  • Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

    Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

    I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
    I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
    http://www.switcheasy.com/products/CoverBuddy/
    I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

  • HT4824 My iPhone is running with ios 4.2.1 & current version of ios is 6.0.1 in this case how can i update my iPhone to ios 4.3.5? itune will show only latest version of ios.

    My iPhone is running with ios 4.2.1 & current version of ios is 6.0.1 in this case how can i update my iPhone to ios 4.3.5? itune will show only latest version of ios.

    If you have iPhone 3G, the latest and greatest is IOS 4.2.1.
    If you have iPhone 3GS or later, you can only update to IOS 6.0.1.
    For iPhone 5 and iPad mini, you can update to IOS 6.0.2.

  • Case with Magnets - any Impact on iPhone 5?

    Hi@All!
    I bought a Case with Magnets to close for my iPhone 5. Does it have any Impact?
    Tranks for help in advance.
    Klaus

    no not at all
    magnets if powerful enough pasive magnets are not powerful enough but strong electromagnets can damage magnetic storage such as a harddisk
    but no ios devices use magnetic storage they use flash storage

  • Is iPhone 6 camera lens cover sapphire?

    hey guys. Since the camera on the iPhone 6 sticks out, is the lens cover made from sapphire? So it won't scratch.

    Yes its made of sapphire. Will it scratch? Possible although its very hard.

  • IPod on iPhone is case sensitive with bandnames, iTunes is not

    Hi,
    The iPod application on the iPhone (software version 3.1) is case sensitive with bandnames, iTunes (9.0.1) is not.
    iPod on iPhone shows the bands
    "Guns n' Roses"
    and
    "Guns N' Roses"
    as separate bands.
    iTunes manages them as one band.
    Cheers,
    Philipp

    Both the root file-system and the /var file-system on the iPhone are case sensitive.
    I have no idea why. Curious thing for Apple to do.
    Must be a unix hacker there. They love case sensitive filesystems
    This is likely a cause of the problem.
    Best just to rename the offending artist and album fields.
    You can sort & filter them in iTunes and change a whole whack of them at once.

Maybe you are looking for

  • "cannot find symbol" error - password checker class

    I had to make a program to check a password to make sure it had two letters, at least eight characters, and only numbers and letters. I'm pretty sure I have all of the checking correct but I can't make use of the method I made to do it. here is my co

  • Not able to book a retrobilled order.

    Retrobilled order is not picking up unit selling price from the price list and therefore is not booking. Retrobilled order generated with retrobill concurrent program. Trying to enter unit list price and book it but not able to enter the unit list pr

  • Updating Sales Order no in Production Order

    we have csenario for Sales Order :  Inquery - Quotation - Sales Order . In PP we have MTO scenarion . when i run MRP and convert the plan order to Production Order , in place of Sales Order it was updatin Quotation in Production Order . we have check

  • Nokia N8 Camera defect blurred spots unsharp

    It seems that the N8 have the old N86 problem with blurred spots in the picture. My old N86 was two times changed by Nokia, because blurred spots in the camera pictures. Now my N8 have the same problem on the left middle corner: Moderator's Note: We

  • Component Pick Release - Source Subinventory, Move Order

    I am using component pick release screen for push components.. Is there any possible way to select source subinventory prior to creation of move order ?