Iphone 3G Charging issues after software upgrade
I recently upgraded my iphone 3G software to 3.0.1. Things were working just fine until this morning when i tried charging my phone by plugging it to a wall socket. I was surprised to learn that my phone would not charge. I then plugged it via USB to my computer and it started charging. I tried the following steps to resolve my phone's problem:
1. reset my phone settings;
2. hard reset; and
3. disable push for my accounts.
Despite following these steps, my phone would still not charge through an electrical outlet. Although it seems like a consolation that my phone would still charge via USB, I find it very inconvenient to lug my laptop around and open it every time I need to charge my phone. Hope to hear from those who have successfully dealt with this problem. Thanks in advance.
I have a similar issue - w/two different variants.
Charging was an issue before and after upgrade.
And the phone will charge if I try different outlets (sometimes as many as 4 or 5 which I think might be due to different circuit breakers) - once I get it working in one, then I can go back to the first outlet and the phone will charge when I plug it in.
I was about to post this concern in a separate thread (and still will) because this is a huge issue when I travel. I did swap my wall adapter without any change. My wife ALSO has the same issue with her 3G iPhone.
FRUSTRATING -
Similar Messages
-
IPad2 charging issues after iOS7 upgrade
I recently upgraded iOS7 in my iPad 2, after the upgrade I find that the charging time has increased greatly! Not sure if this was due to using the iPad while charging. Yesterday left iPad2 for charging all through the night and more (12-14 hrs) only to find this has charged only 3%. The charging issues seems to have degraded over time. I had atleast charged fully (100%) once after iOS7 upgrade-which also took a lot time than iOS6.
All the charging I did was over wall Unit, with original chargers. I see from forums that this seems to be experienced by few more users. Anyone found any solution to this problem?
I have tried resetting, switching off the iPad 2 while charging with no success. I'm now regretting having upgraded to iOS7- which I liked. This is not what I expected from Apple.I also have a Mac Air 2012, tried charging from Mac Air and it's now charging! Mac Air is now charging from the same wall unit location which I used for iPad 2 - so nothing wrong with the wall unit.
I just wish i could charge as fast from wall unit as with iOS 6. Any further guidance is greatly appreciated. -
Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.
In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat -
C60 BOOT UP IN MAIN MODE AFTER SOFTWARE UPGRADE
Any one aware of why the C60 would go into maintenance mode after software upgrade from TC5.0.1 to TC7.2.1???
Software loaded and appears to install properly ???
Thanks.Hi Chet,
You can try a factory reset in addition to the suggestions in the following post for similar issue
https://supportforums.cisco.com/discussion/12394476/c60-possibly-faulty
HTH
Manish -
Performance issues after iOS4 upgrade
hello everyone,
I had notices few issues after I upgraded my iPhone 3GS:
1- The screen is not rotating (when reading e-mails of flipping photoes).
2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
3- my Ipod is not working.
4- I could not restore my device via the itune.
my big question is there a real tangible benifit for this new upgrade?
I really appreciate if you can help me soon
thanks.There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine. -
what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
How much trade-in value can I get from VZW or BestBuy or Amazon?
Thanks!http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
DROID Bionic: (9/8 launch) – You already know everything about this device, don’t you?
Samsung Stratosphere: (9/8 launch) – 4G LTE device running Android 2.3
HTC Vigor: (10/6 launch) – Will replace the HTC Thunderbolt
LG Revolution 2: (10/20 launch) – Will replace the original Revolution
Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
Samsung Illusion: (9/29 launch) – 3G smartphone running Android 2.3
Samsung Plato: (January launch) – whatever it is, it was pushed to 2012
HTC Bliss: (9/29 launch) – Lower end Android 2.3 device; the chick phone?
Motorola XOOM 4G LTE: (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores. -
Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Cheers, Tom -
Performance Issues after an Upgrade
Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- KrrishThere are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine. -
I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!
You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
Lost all contacts after software upgrade can anyone help
lost all contacts after software upgrade of my phone and cant get them from outlook to address book on my mac to get them back
Suggest that you cross-post over in one of the iWeb forums.
!http://i50.tinypic.com/izvwo1.gif! -
Problems with rv042g after software upgrade
after software upgrade it reboot the router about every 45 sec
I've tried this tool from the Cisco website RV0xxV3_FirmwareRescueUtility_v4.0.0.7 without success, the problem is there, is a way you can get the router up and running again ?
Can i run a TFTP server and upload a new software, or i ther a FirmwareRescueUtility for rv042g ??
Mogens from DemmarkGood morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer -
Iphone could not activate after software update
iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier? -
HT5957 my iPhone 4S is disabled after to upgrade it, this morning.
Hi. my iPhone 4S is disabled after to upgrade it, just this morning. What do I need to do in the computer to restore it.
randy195 wrote:
My iphone 4s is disabled (connect to itunes) and i am not sure if i have a recent back up of it and i dont want to restore cus i will lose alot of my stuff so can i wait until the next ios update [ios 7] (sept 20) and if i do will i be able to access my phone without having to restore?
You can backup to a Mac or PC via iTunes. Just make sure your iTunes Preferences/Devices is checked so it will NOT AUTOMATICALLY backup/sync when a device is connected. Click on your iPhone and Back it up. This will preserve your iPhones "current" content and settings.
I hope a larger display is in the works. -
IPhone syncing issues after iTunes upgrade
Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
ChrisHi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason -
since updating my iphone 3gs software it has developed the so called "white screen of death" this happened immediately after software install. It has never been dropped or damaged. I have tried the solution which seems to pop up most of holding down the power button and the home button for 10 seconds but this hasnt helped at all. Tried ringing apple, who were less than helpful and disinterested as the phone is out of warranty. I am hoping there is a solution which doesnt mean shelling out for a new phone! any ideas?
Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore
Maybe you are looking for
-
All sites work fine except Gmail will not load. I prefer Firefox, but to be fair, Chrome and IE are doing the same thing when I try to use them. Occasionally Gmail will pop up, most of the time it just endlessly cycles and I don't even get an error m
-
How to find a specific char in fileinputstream?
Hi I've opened a fileinputstream for a text file. I need to read through it char by char to eof in order to find occurances of some ascii characters e.g. "," or "@" etc int eofii =0; try FR = new FileReader("UnusualTextFile.txt");
-
PSP [Playstation portable] not recognized by Windows 7 RC Build 7100
Hello all, I have a PSP [Series 1003]. Firmware : 6.10 [latest] . My PC's OS : Windows 7 64Bit RC Build 7100. Ever since i installed Win7 in my PC [new PC] , it was not able to recognize my PSP. In the PSP it shows "Please Wait" when in USB mode. The
-
Access 2013 crashes after mail merge in Word 2013
We have several Word templates that query an Access database to populate themselves. After the mail merge is complete, when we close Word then Access immediately crashes every time. This started after upgrading from Office 2003 to 2013. We tried upda
-
BPC 7.5 : Error in deleting member from dimension
Hi All In BPC 7.5, I have created earlier one member "F_P/L"in Flow Dimension and tested some data. Now I want to delete the member "F_P/L" from the Flow Dimension and while processing it, I am getting following error : " Dimension