IPhone 3G Completely Unusable - HELP!

Hi,
I recently bought my iPhone 3G in Abbotsford, BC (Canada). This week I took a trip to Europe, and during a flight... the phone completely froze up.
I have done the "soft-reset" (holding down power and home button until reboot) numerous times, but it won't go ANYWHERE. The Apple logo is all that I have seen on the device ever since. It appears to be freezing on every boot.
I can't even sync or reinstall the software (for a hard-reset). Basically, the device is completely useless. What do you recommend? is there other button combos for an actual "hard-reset" of all data? Any possible solution?
I am in Europe until August 6th, so I can't exactly take it back to the store I bought it from (for a couple weeks at least).

Don't know and magic button combos. All I can suggest is to find an Apple store nearby.
You can find stores in the UK or Italy here: http://www.apple.com/retail/storelist/
Worldwide technical support numbers are here: http://www.apple.com/support/contact/phone_contacts.html
Good luck.

Similar Messages

  • Iphone 4 Completely Dead, Help??

    So my iphone was on 70% battery when it suddenly went off, it would not turn back on. It will not charge and is not recognised in itunes, i have tried a different power supply still nothing. PLEASE do not suggest the the hold power button and home button IT DOES NOT WORK FOR ME, tried about 300 times even holding on to it for up to 5 minutes, ive tried reseting through itunes aswell.
    I took it too apple and they said they dont know whats wrong with it and want me too pay for a new one (helpful) Shall i buy a replacement battery and swap the battery? any suggestions please, thankyou

    If you have tried http://support.apple.com/kb/TS3281 without success, you probably do need a new iPhone.  If you do a battery replacement you will take away any support from Apple including any kind of replacement at a reduced cost.  The only option then is pay the going rate for a new iPhone.
    Did the Apple store offer an out-of-warranty replacement?  For an iPhone 4 that is $149.

  • Photoshop CS5 - Completely unusable.. help!

    OK.. where do I start...
    My company recently purchased a licence for Photoshop CS5 (Mac) at my request, and I am now stuck in the unenviable position of telling them it was a complete waste of money.  Hopefully someone can help me resolve some of these issues and save my butt at the same time...
    Problems:
    1. Won't quit.  Whenever I launch PS, even if I do nothing.. I can't quit.  Selecting Quit from the menu does nothing, nor does Command+Q.  I have to force quit every time which means none of my preferences are saved.
    2. Images don't update.  If I open ANY image with more than one layer, selecting/unselecting layers doesn't change the image.  For example, if I have an image with two layers in which only one is selected, then I select the second layer nothing will change on the image until I actually draw on it or make some sort of change to the image.  In other words, it's not re-rendering when I select different layers.  There are other situations in which this occurs but this is the easiest to explain/reproduce.
    3. I can't create a New image. If I select File->New... I get the New Image dialog, but clicking OK does nothing except make the dialog dissappear.  So I can't create any new images.  This seems to happen intermittently though.. sometimes it works, sometimes it doesn't.
    4. General performance.  I have a fairly new MacBook Pro (Intel Core i5 2.4 GHz, 4GB RAM) but photoshop is appallingly slow to use.  Just general use (opening images, selecting tools etc) takes several seconds to execute.  Way more than any other app I use.
    5. If I run Photoshop in 64bit mode I am greeted with the following error at startup, "Could not complete your request because of a program error."  No idea what the error is, but I'm assuming this is a bad thing.
    I have tried uninstalling/reinstalling.. no change
    I have tried removing with AppZapper and re-installing.. no change
    I have tried running in 32bit mode vs. 64bit mode... no change (other than the error listed above for 64bit mode).
    I have noticed the following errors in the system log.. not sure if they are relevant:
    /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5[24480]: MDS Error: unable to create user DBs in /var/folders/B3/B3RE+qikH74rCK1Evpl+ik+++TI/-Caches-//mds
    Adobe Photoshop CS5[24480]: -[NSCFString _getValue:forType:]: unrecognized selector sent to instance
    At this point, Photoshop is completely unusable for me.  I'm sure it's more likely to be something with my setup (although it's pretty much a vanilla Mac setup), but either way I need some help!
    My Mac version is:
    10.6.7
    Photoshop version is:
    CS5 Extended 12.0
    Any help appreciated.
    Thanks!

    Thanks for the reply.  I appreciate that millions of people are using Photoshop.  I simply hoped that one of those millions may have some useful tips to help be diagnose and (deally) resolve the problems.
    I have updated Photoshop however the same problems persist.
    I have also discovered that the issues with not being able to quit, and not being able to create a new image are limited to running in 32bit mode.  If I run in 64bit mode I am able to do both of these, however I still get the error at startup.
    General performance is still very slow however. For example if I "long press" on the shapes tool (to display the context menu for shapes) selecting a shape from the context menu takes about 10 seconds to resolve.  During this time the CPU spikes to 100%.. all used by Photoshop and the entire machine is locked up while the CPU is maxed out.  Indeed this is observed for any context menu accessed from the Toolbox.
    I haven't profiled it, but I'm assuming the slowness I see elsewhere is due to a similar effect.. namely CPU pegging.
    I do not have any 3rd party plugins at all (it is a fresh photoshop install).
    I have no idea what a haxie is, however after reading wikipedia (http://en.wikipedia.org/wiki/Haxie) I am fairly certain I do not have any of these installed.
    I also understand that it is almost impossible to "fix" my issues from this brief explanation without knowing the full setup of my machine, however I am not necessarily looking for a solution, merely some guidance as to how to diagnose the problem so I can provide more meaningful data.  Are there any logs produced by photoshop that I could inspect to help me diagnose?
    Thanks.

  • Help...!!!! After down loading the latest software version 5.0 my iPhone went completely dead. I can't switch it on... It's completely dead. What do I do..?

    Can someone help please..? After down loading to the latest software verssion 5.0. My iPhone went completely dead. Can't swith on any more. What can I do?

    Hi, thank you very much for your reply. No my phone was never been jailbreak-ed. Never been dropped in water or in any wet surface. Dropped on the floor while texting yes, but it was just a one time incident, last year august i can clearly remember, but after that no more (phone still works fine even after.) restored the phone again earlier, but problem still occured. Will try to go to Apple also to ask and have it checked.  Just worried because my phone is already out of warranty. Will keep you posted. Again, thanks. If you have any more advice just let me know. It would mean a lot.
    Cheers,
    N

  • HT1430 My iPhone is completely frozen. I did a hard reset about 10 times and finally the iTunes logo appeared with a plug-in showing. I can't get it to anything else. Help?

    MY iPhone is completely frozen. I did a hardest and finally after 10 times it came up with the iTunes logo with a plug-in sign.  It is still frozen.
    WHat should I do.
    MErmaid

    You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
    When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
    So far I have tried the following to no avail:
    Checked my pc's device manager - it recognises the device and says it is functioning properly.
    Checked the drivers to make sure they are upt to date.
    Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
    Reinstalled the latest itunes.
    Reset the ipod.
    Put the ipod into disk mode and reconnected to itunes.
    Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
    Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
    At this point I dont really want to part with another $300 odd dollars for a new one.

  • I can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

    i can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

    If you are the original owner of the phone and know the Apple ID and password that were used to activate it originally, and if you have an existing backup to restore from, you can force it into recovery mode (which will completely erase it) and restore it as explained here: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support.  When you do you will encounter activation lock, and will have to provide the ID and password used to activate it originally in order to activate it again.  If you can't, you won't be able to activate and use it.

  • IDCS3 Freezes - completely unusable

    Hi,
    I'm running a fully patched indesign cs3 on a fully patched xp sp3 machine. Both xp and indesign are fresh installs. My specs are:
    quad core 6600, 4 gig ram, 8600 gts nvidia, 10,000 rpm hard drive.
    Indesign freezes (usually for ~20-60 seconds) when I try to do anything at all. Opening a file, moving an image around, even just scrolling the page.
    It seems to partially lock the OS as well. I can't open any new windows (windows-e for explorer, for example).
    Please help, it's completely unusable.

    This kind of problem is often related to video drivers, I think, or to trying to read/write over a busy network (and that includes updating previews for images stored on the network).
    Video drivers are tested by turning video hardware acceleration to zero in the troubleshooting tab of the display settings dialog. If that fixes things, you need a new driver.
    Peter

  • I am having trouble activating my iPhone 4 could you help me?

    I am having trouble activating my iPhone 4 could you help me?

    Yes. AT&T has to authorize the unlock. However, they can not do so in the store. There is a process that must be followed involving restoring the phone in iTunes to complete the unlock process.  How did you use the phone in between the time you bought it and the time AT&T authorized unlocking it?
    WHEN did AT&T authorize unlocking it? AT&T did not begin offering unlocking until last Spring if I recall correctly.

  • TS3694 trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do?

    trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do? - Help cos I've lost my contacts!!!!!

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • My iphone went completly black and wont respond to anything

    My Iphone is not working at all its completely black and wont respond to anything if you know the soultion to this problem  please let me know thank you

    Hi mikemikenation,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the blank black screen issue with your iPhone 5s.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Take care,
    -Jason

  • IPhone 4s completely frozen

    So, since I got my iPhone 4s last December, it sometimes keeps freezing after long phonecalls. It might do it once or twice a month. It wasnt too regular to worry about it as it normally sorted itself out, as I would just wipe the screen clean and lock it and unlock it a few times using the button on the top of the phone and it would unfreeze without any problems.
    Tonight though after being on the phone for around 45 minutes, my phone completly freezes and I can't get it unlocked at all. I cant get into my phone to do anything as I can't swipe it to unlock or turn off.
    I have tried to reboot (where you press the lock and the home button until you see the apple logo) a number of times and I have even restored my phone to factory settings but neither thing has worked.
    My iPhone is completly up to date (ios 6.0.1) as is my iTunes. My phone is just over a year old too, and no other problems with it. No cracks, knicks or scrapes on it either. It's very well looked after. I have done everything as instructed on the support page and have looked through numerous threads and forums but no suggestion has seemed to help or resolve the issue.
    Unfortunatly I don't live near any apple store either so genius bar is a last resort for me.
    Any help or suggestions would be really appriciated.
    Thanks in advance.

    meka2835 wrote:
    My IPhone 4S is completely frozen.
    See Here for
    Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062
    meka2835 wrote:
    My home button is not responding, my power button is jammed, and my phone is not responding to a charger. Help please?
    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is trequired... Be sure to make an appointment first...
    http://www.apple.com/retail/geniusbar/

  • My iphone 5 completely died 27 hours ago, ive had it on charge for 15 of those 27 hours, what can i do?, my iphone 5 completely died 27 hours ago, ive had it on charge for 15 of those 27 hours, what can i do?

    mouy iphone 5 completely died 27 hors ago, its been charging for 15 of those 27 hours and its not doing anything, ive tried resetting it but it hasnt worked
    could someone help me as to what i can do?

    try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • HT201263 iphone is stuck at "Restoring Iphone Firmware".  Please Help.

    I was restoring and updating my Iphone 5 to IOS 7.0,6 and during the process after completing more than 50% of the process my phone is stuck at "Restoring Iphone Firmware".  Please Help.

    Hello nishit.kadia,
    It sounds like your phone became unresponsive when you attempted a restore of the device. Try resetting your device with this process:
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From: Turn your iOS device off and on (restart) and reset
              http://support.apple.com/kb/ht1430
    I would try putting the device in to recovery mode, and attempting the restore again:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • TS3694 stuck at "Restoring Iphone Firmware".  Please Help

    I was restoring and updating my Iphone 5 to IOS 7.0,6 and during the process after completing more than 50% of the process my phone is stuck at "Restoring Iphone Firmware".  Please Help.

    How long has it been "stuck"?

  • My apple id is not working for my iPhone activation. Please help me.

    my apple id is not working for my iPhone activation. Please help me.
    i'll just restore it.

    Not working in what way?
    Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

Maybe you are looking for

  • How to recover data from hard drive of failed notebook

    I have a broken F767NR laptop. Broke due to something other than the hard drive. What is the best method to extract the data from the notebook hard drive inside the laptop since the laptop won't turn on? Anyone with any specifics would be helpful!

  • 2330 Classic Memory Issue

    My 2330 has around 6 mb of txt message files that I am unable to delete because the phone shuts off shortly after I initiate the process. For the ensuing hours it's fickle, unable to load the messages until magically the phone works the problem out a

  • Counter in Flat file

    Hi All, In my IDOC there are three item segements E1J3AIT, E1J3AIS, E1TXTH9.They are linked to three different structures SI1, SI2, SI3. I am creating a flat file. In the target structure there is one common field counter. Now if my first segment has

  • 802.1x and PEAP

    Dear All, We are going to use 802.1x PEAP and with MSCHAPv2 for authentication. The problem is we dont have and trusted CA server in our setup. So clents will not be able to verifiy the server certificate . Is there way to avoid checking of server si

  • App Store hangs when opening after installing Mountain Lion

    App Store opens but goes immediately to a spinning wheel.  Anyone have any ideas?