Iphone 3g dead after installing dual level

Hi all,
this is really anoying.
I installed ( or tried to) the application "dual level" from appstore.
Then my IPHONE suddenly rebootet but it did not come up again.
The screen shows the apple logo in the middle but nothing happes .
I pressed the home button and the "standby button" on top to force a reboot - but still the same:
After it went down, the apple logo shows up but nothing happes further
Any suggestions ? I need my phone urgendly
tia

First do not connect THROUGH a usb hub. Make a direct connection into one of your computers usb2.0 ports. Now try holding the wake/sleep button or standby button as one of you called it, and the home button until the iTunes logo and the usb connetor cable apear on the screen. This will put the phone in recovery mode. Itunes should then recognize it.
If that one doesn't work. Try getting to power off. Then with it plugged in still directly! Hold the wake/sleep button for five seconds. While still holding the wake/sleep button hold the home button for five seconds. Then realease the wake/sleep button and remain holding the home button. Itunes should recognize it in DFU mode.
Restart your computer before you try those though, just to be sure your computer isn't acting stupid. They like to do that at times. Mostly when you are really not in the mood for it!

Similar Messages

  • My external drive went dead after installing Leopard

    Hey guys
    I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
    Thank you in advance

    Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
    You can't download them again with purchasing once again.

  • Usually i back my IPhone with ICloud, after installing IOS 5 it asked me to restore from I Tunes what i have to do?

    usually i back my IPhone with ICloud, after installing IOS 5 it asked me to restore from ITunes what i have to do to restore all my contact, applications and others?

    If your iPhone does not search for a wi-fi connection before you are asked whether you want to set it up as new phone or restore a backup from iTunes, then I guess you have the same issue as highlighted in this thread:
    https://discussions.apple.com/message/19638850?ac_cid=tw123456#19638850
    iCloud back ups can only be accessed via wi-fi that's why you are not granted this option, I have the exact same issue.

  • Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?

    Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?
    I'm all mac-based and followed the instructions for the upgrade to iOS6 software for iPhone but now my calendars won't synq.  When I connect to iTunes and run the synq process, it gets stuck on the Calendar step and will not finish the synq process.  I have to either wait for it to quit or force it to quit.  Additionally, when I try to log a new event or meeting onto the Calendar on the iPhone, it will lock up and quit the app.  I then have to shut down the iPhone to get it to open again but it just locks up again when I try to log a new event.  Any suggestions?  I'm tempted to do a back up and reinstall but don't want to risk any data loss.

    Hi there,
    I am using Rogers, which does support tethering.
    The iPhone does not show up in the list of devices in the Bluetooth preference panel. It fails at the Pairing step of the Bluetooth setup assistant.
    Cheers!

  • Iphone 3 dead after restore?

    Why is my iphone 3 dead after a restore and update?

    Define "dead."  
    Did you try resetting> - press both home and on/off buttons for AT LEAST 10 seconds until the Apple logo appears.

  • After instaling iOs5 on my iphone4 my sim card couldn't activate my iphone please help, after instaling iOs5 on my iphone4 my sim card couldn't activate my iphone please help

    after instaling iOs5 on my iphone4 my sim card couldn't activate my iphone please help, after instaling iOs5 on my iphone4 my sim card couldn't activate my iphone please help

    Where did you get the phone? If it was previously locked to a carrier and was hacked/jailbroken to use it on a different carrier, updating the phone has re-locked it to the original carrier. ONLY the carrier it is locked to can authorize and unlock.

  • Iphone 3g dead after trying new ios 6 instalation

    I was downloading the upgrade , my iphone unlocked dead.
    I tried to restore throug itune but nothing. After a couple minutes, I can hear the sound when you desconnect the device.
    I can not turn on the phone. It only flas the apple logo. The screen does not show anything.
    Please HELP!

    GMDG2008 wrote:
    I just plug the phone, the logo apper but started flshing on / off every....5 seconds
    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • IPhone 5 dead after July 2014 update

    MY iPhone 5 is dead after update. Apple has no answers but to sell me a new phone.  Any good advice ?

    firmamentfarm wrote:
    After last update battery drained within a few hours, same after recharge.  Apple told me I have a dead battery and would replace same model for $260 (sorry, that is not small change and I live 3 hours from next Apple store).  Therefore had a local cyberstore install a new battery, however it drained just like the original.  Any different advice?  I understand that my options with the Apple store may be over since I let the cyberstore touchy it.
    Yup, since Cyberstore performed unauthorized service on the device, the warranty for your iPhone has been voided, and that even includes the $79 battery replacement option from Apple or the $269 Out of Warranty option from Apple.
    You have a paperweight now.  Sell it for parts to someone that performs unauthorized service, like Cyberstore.  Maybe they'll use it for parts to void another person's iPhone.
    Next time, don't get unauthorized service done on your iPhone.

  • Itunes doesn't recognize iphone sim card after installing io5

    I sent hours trying to upgrade my Iphone 3gs to io5 and now Itunes doesn't recognize the phone sim card, I only have a message saying 'There is no sim card in the Iphone you are trying to activate'.   Iphone is no longer under warranty, so I don't know what to do if doesn't work any more.
    Any advice very welcome Thank you!

    Same problem with my 3GS :
    Impossible to activate IOS 5 because itunes say "sorry there is no sim inside"...
    I tried everything and the problem is found on many forum. many people can not activate their iPhone after installing the update.

  • Tomcat dead after install of SP 1

    Hello,
    I installed webaccess on my server (SLES 11 SP3).
    During the install script I noticed some trouble with tomcat and right,
    after install tomcat reports "dead"
    rcnovell-tomcat6 start brings the message
    "lock file found but no process running for pid xxx, continuing .... done"
    But a status afterwards states "dead" again.
    I found this thread [1].
    Following the discussion I checked catalina.out and there is no entry
    with "Deploying Groupwise webaccess version 14.0.1"
    This thread ends how so often in open state :-((
    On same machine is out calendar publishing host, may be, it´s also affected.
    Where can I search?
    Gotthard
    [1]
    https://forums.novell.com/showthread...-to-Web-Access
    Gotthard Anger
    Anwenderbetreuung Netzwerkadministration
    Landeskirchenamt der EKM
    [email protected]
    http://forums.novell.com/member.php?u=35038

    Originally Posted by gotthardanger
    Am 31.08.2014 18:58, schrieb Gotthard Anger:
    > Hello,
    >
    > I installed webaccess on my server (SLES 11 SP3).
    EDIT:
    a) I updated webaccess from 14.0.0 to 14.0.1
    b) system is OES 11 SP2
    Go
    Gotthard Anger
    Anwenderbetreuung Netzwerkadministration
    Landeskirchenamt der EKM
    [email protected]
    http://forums.novell.com/member.php?u=35038
    Did you see this TID: http://www.novell.com/support/kb/doc.php?id=7015536
    Thomas

  • Iphone 3gs crashed after installing new ios update

    Please help. I just installed the newest ios update to my daughters iphone 3gs. It installed successfully, i thought. Then about 10 minutes later it said verifying update. It went off and now tries to come back on and the apple icon flashes for a few seconds and goes back off. I have tried a hard reset (both home and off buttons held down) and it does the same thing:(  Please help me!

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Perform a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • MY E5 DEAD AFTER INSTALLING 2 ANTIVIRUS APPS

    My e5 went blank after installing netqin app while kaspersky mobile security was still installed. What's the solution. Please help

    @Drogzf
    Presumably you have already tried removing battery for 10 minutes and replacing?
    As three button depressed power on "hard reset" combination has to date never been confirmed for E5, there is little alternative but to visit a Nokia Care Point unfortunately.
    Happy to have helped forum with a Support Ratio = 42.5

  • HT4623 iphone not working after installing update

    received notice that io6 was available to be installed.  after installing the io6 update the phone turned off and will not power on

    Read the trouble-shooting suggestions here:
    http://www.apple.com/support/ipad/wifi/

  • HT4623 iphone went dead after update

    iphone went black after update

    Connect iPhone to computer with USB Cable and Reset, hold both home and power buttons until the iPhone begins to respond. Usually takes about 20 seconds of holding both buttons. If still problems, try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

  • Ibook G3 700mhz dual drive dead after installing 10.3 please help!

    hello
    this is my first apple mac and i bought a ibook g3 powerbook which is:
    700mhz processor 512k level 2
    128mb SDRAM + 256mb stick
    20GB ultra ATA hard drive
    combo drive
    400mpbs firewire port
    video VGA
    i updated it to 10.2.4 from 10.1 and it worked absolutely great :O)
    i then got a 10.3.4 disk this is when problems happened to 'narna' (my G3) i loaded disk first time i did an upgrade install and i did custom install (i didnt want printer drivers and languauges on so disabled them) about 10 mins later came up with error while installing so i quit install, restarted 'narna' and reset cd off again to upgrade....
    the second time i forgot to deselect printer drivers and while installing them 'narna' froze. so i had to put power plug out to get it to restart up.
    i switched back on and got a grey language screen telling me to press power button to restart. thats all i get...
    i've tried option button with disk so i can select the drive from which to start it up and my drive is there with 10.3 on it with a red cross on the box. if i selct that drive to boot 'narna' up from it restarts computer and then while it loads i get the grey apple screen and then it freezes again but this time i get lots of grey/white lines across the screen...
    i think thats all the information...what i'm after is there any way i can solve this etc without completely wiping my computer :O( i have the original 10.1 disks but i tried those i can get on and open OS9 on the computer and it shows my other OSX drive with 10.3 wrote next to it... but the restore disks dont seen to do anything with my computer as it just gives my same messages to restart/boot or takes me to drive then it crashes...
    please please please help! i've never had an apple mac before so not sure what to do to help it....

    Hi giantbutton,
    A good first step after any significant crash on a mac, especially if it occurs during an installation of software etc, is to start up from your OS CD or DVD (just like you would if your were trying to install software) but to then run "DiskUtility" instead of the installer. You can access DiskUtility from the "Installer" menu on the menubar when booted from the Panther DVD.
    Once Disk Utility is running select your Hard drive in the panel on the left of Disk Utility window and click on "repair disk". Disk Utility will test the drive and repair problems with its directory structures if it can.
    Once the "repair disk" process is complete use the "repair permissions" process.
    If the repair processes works then you can try a fresh installation of Panther. If not, then your best option is probably to wipe the drive and start from scratch on a "clean" disk.
    It is always a good idea to use Disk Utility to "repair" the disk and permissions before installing any OS upgrade or major piece of software.
    http://docs.info.apple.com/article.html?artnum=106214
    http://docs.info.apple.com/article.html?artnum=162662
    http://docs.info.apple.com/article.html?artnum=25735 and
    http://docs.info.apple.com/article.html?artnum=107120 provide some useful information
    As far as the memory requirements go, it depends a lot on what you are doing with your computer. If you are running regular "office" type software, browsing the web , etc then 384 MB should be fine for Panther, though you may not want to run too many programs simultaneously. For "heavy duty" tasks (video editing and the like) , though it would be seriously limiting.
    Cheers
    Rod

Maybe you are looking for

  • Building customize component using java API

    Hi, Appreciate for hepls... being trying this for few days...:( I am trying to build a customize component to use in a process using adobe java API. I follow the document and include all the necessary lib files. It compiled with no errors. And I pack

  • If statements in catch blocks

    Can you use if statements in catch blocks? (See below) Any help would be appreciated.. catch (Exception e) // System.out.println("input error"); if (deposit < 0) System.out.println("input error"); System.out.println( "Balance is "+ patricksChecking.g

  • Before I publish to iweb

    I'm ready to publish my site, I have 2 questions before I put it up. 1 When I open my iweb pages I get an error box, says: "The following errors occurred while trying to open this document" Then it lists three "missing files" all jpg - which I probab

  • Stickies Problem

    Hi, I've been trying to create a new sticky note with the Stickies app, but for some reason the app will not allow me to display more stickies other than the two I have on my desktop. Every time I click New Note, nothing happens. I can see the window

  • Prerequisites to generate PDF in web dynpro

    hi Web dynpro Gurus, I am trying to create a web dynpro application, which uses two BAPIs, The first BAPI output results in some data which I am displaying in a table format. Now among the data retrieved from the first BAPI is INVOICE number. Now on