IPhone 3G doesn't connect to carrier anymore after upgrade to iOS 4.02

Hi guys, I just upgraded my iPhone 3G from iOS 4 to iOS 4.02, but after the upgrade, I can't phone anymore because the telephone doesn't connect to my phone carrier anymore.
Everything else seems to work fine, but I got a continuous "searching..." message at the top left of the screen. Furthermore, when I open settings, I can't see phone settings anymore.
Is this a known issue? Has anyone advices on how to fix it? Do you think a restore could fix the problem?
Thanks a lot.

I have the same problem! Cant access settings, and no MMS. Can I please get some help?

Similar Messages

  • HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

    My iphone 5 does not ring anymore after upgrading to ios 7.0.2.  It did not happen right away, but maybe 2 weeks ago.  I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in.  I also turned my phone off and it still only vibrates when calls and messages come in.

    I found another feed and said there is a silent button next to volume bar.  That was the problem.

  • Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

    Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

    Not sure, but try this:
    Let the battery drain to below 20% (I went to about 14%).
    Plug your phone in and leave it to charge COMPLETELY. This took my phone somewhere around 4 hours to complete.
    When you're done, you may have better luck keeping a charge.
    iOS 5 adds a lot of additional communication, and every time you connect wirelessly to anything, more power is used. Even so, some people report that a battery cycle like this helps. It seems to have worked for me.

  • PC Suite doesn´t connect to N80 IE after upgrade

    I recently got the new N80 IE. Everything was fine using the version of PC Suite which comes with the phone. But after upgrading the the newest version, the USB cable connection doesn´t work anymore (using the phone as USB disk still works). There are no error messages. When trying to connect via cable the connection assistant just doesn´t proceed when i press the "continue" button. I´ve uninstalled all components. I started the Reg Cleaner but with no success. Any ideas (ok haven´t tried to install the old version)

    Thanks for the advice. It works! But now, although PC Suite shows that the phone is connected 'Nokia 6020 connected via IrDA', I can't get the programs within PC Suite to connect. When I start Synchonise, it says phone not connected. When I select a phone, the 6020 is listed, and when I click on connection to select Infrared nothing happens - I can't proceed further from here.
    kriben

  • Iphone 4s cannot auto connect to home wifi after updating to ios 6.1.2

    My iphone 4s will not auto connect to my home wifi after updating to IOS 6.1.2.  I can manually connect to my phone to wifi but it will get disconnect if I'mnot using the phone. Any way to reslove?

    Once the phone goes into sleep mode, it is supposed to auto disconnect from wifi to save battery. Are you saying that once you wake the phone up it will not auto connect at that time?
    Suggest you try and forget the network, then go in and try the reset network settings again and then try to rediscover the network and connect again. Have you tried to do a reset of the phone, but holding the sleep/wake and home buttons together until you see the Apple logo and then release?

  • IPhone 4s heats up and drains battery quickly after upgrading to iOS 8.1.2

    Last Sunday i.e. on 14-Dec-2014 i upgraded my iPhone 4S (WiFI + 3G, 64GB) to iOS 8.1.2. Since then my iPhone's battery has started to drain out abnormally fast (it doesn't even last an hour after charging it fully to 100%) and the phone even heats up simultaneously.When checked under Settings> Usage> Battery Usage, i found the app-wise usage of battery like this: Phone (Audio) 36%, WhatsApp-24%, Home & Lock Scree-17%, Settings-7%, Messages-5%, Mail-4%, TOI-2%, Conatact-2%, and rest few apps 1% each. Prior to upgrading the iOS to 8.1.2, the battery life of my iPhone was normal: i just had to recharge once in 24 hours with normal usage of the phone. Could anybody help me to fix the problem? Thanks in advance. -BBS Ijam, GTK/SKM/171214

    I think iPhone 4s is oLd now we need to update our as I will have to change my battery from repair center maybe this will solve the problem the new iOS are heavy for our phones.
    *** I also have extra internal battery cover for my iPhone. I can't go out without that cover because my iPhone battery drain so fast from 100% it will be maybe 60 % so fast that is so annoying.
    Long story short my iPhone is screwed up I think I don't trust my iPhone battery anymore.

  • Safari on iPad does not display GIF image anymore after upgrade to iOS 4.3

    1) Could anybody (especially those in Apple iOS or Safari teams) advise me why the Safari on my iPad cannot display some images (probably in GIF formats) on some webpages anymore, after I upgrade my iPad to iOS 4.3? These images on the webpages can be properly displayed on when my IPad runs with iOS 4.2.1. There should be no problem with these embedded image files because they can still be properly display in Safari running on my Macbook air.
    2) Is there any solution to this problem?
    3) Is it possible to downgrade my iPad back to iOS 4.2.1?

    I am having the same issue with two different ipads (one Wifi and one Wifi-3g) running on our home network (Verizon FIOS). The website in question is www.tvwc.com and the main logo in the upper left corner, a .gif, does not display, only a "?". Other images on the site, in .jpg format, display correctly.
    I was running 4.2.1 and am now just upgrading to 4.3.

  • I am unable to connect to my wifi after upgrading to ios 7 can anyone help?

    hi all
    can anyone help me find out how to connect to my wifi after i upgraded my fone to ios7,ive tried logging on to my account but still no connection??

    If you have tryed every thing we have said and all of this
    http://support.apple.com/kb/TS1559?viewlocale=en_US&locale=en_US
    then it must be hardware, to make sure this is the case go to your local apple store and then let them see it at the bar there, they will say how much it will cost to fix or fix it if they can.
    Hope this helps

  • HT4623 iPhone 4 (2011) very sluggish and battery issues after upgrading to iOS 7

    Hi,
    I am experiencing crazy sluggishness in my GSM iPhone 4 (2011 model) after recently upgradig to iOS 7.0.2 from 6.1.3. Phone's freezing every few seconds and when it does, you can't do any activitiy, keyboard will not respond, videos will freeze etc.
    Top of it, the battery is drying up like nuts. It used to work for more than 24 hrs with same settings earlier, now hardly 7-8 hrs !!! ..... I turned off everything like background-app refresh, wireless, 3G, bunch of other things, infact not even keeping any apps running in background while not using, I immediately kill it as soon as I am done using it.
    Am very badly stuck, biggest mistake of my life that I ugpraded to iOS 7
    - Is anyone experiencing similar issues ?
    - Is there any way I can go back to previous version ... is Apple still signing iOS 6.1.3 ? I don't have shsh blob backup of previous version.
    Any thought is greatly appreciated.
    Thanks in advance,
    Rajiv

    rajivrp wrote:
    Hi,
    ..Phone's freezing every few seconds .
    Any thought is greatly appreciated.
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also try a Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If no joy...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    rajivrp wrote:
    - Is there any way I can go back to previous version ...
    Apple does Not Support Downgrading... Never has.

  • Can't connect to itunes store after upgrading to ios 5.01

    hi there.  after having recently upgraded my iphone 4 to ios 5.01, i cannot access the itunes store to update any of my previously installed apps or purchase any new apps.  i've already tried doing a soft reset (home button + sleep button) and have also restored my iphone to factory settings to no avail.  can anybody help?
    thanks.

    kipfkd01 wrote:
    I was able to connect to the iTunes store before the upgrade but after going to iTunes 10 I have not been able to. Whats going on?
    Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? Some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure. If you have Norton, you can find instructions for that utility on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
    Hope this helps.

  • Cannot connect to iTunes Store after upgrade to ios 5 - iPad2

    After upgranding my iPad2 to the ios5 I lost the connection to the apple store and the iTunes. I already reseted my password using the web, but I still cannot access the iTunes using the iPad2, but I CAN access the iTunes using my iphone4 and my ipod touch. Does anyone have any idea on how to solve this mistery?

    Try here >  Can't connect to the iTunes Store
    On the iPhone, tap Settings > General > Reset > Reset Network Settings
    Restart your iPhone. Try connecting to the iTunes Store.

  • I cannot use  my iPhone to make calls or send text messages after upgrading to ios 7

    I just upgraded to ios7 and I can no longer  make calls or send text messages.  The screens seem to be locking.   Does anyone know what I can do to fix it?

    My wife is having the exact same issue after updating to the new iOS 8.1.1 and we've tried all the same steps even restoring the phone as a new phone. We've contacted our service provider and they've told us to go to apple to potentially "remove" her serial number from their servers to allow it to work properly on the service we have. We are desperate as purchasing a new phone right now is not an option and she desperately needs her phone for work and life.
    Iphone 5 8.1.1

  • Can't connect to Australian AppStore after upgrading to iOS 6 in Europe...

    How do I connect back to my Australian App Store? Installed iOS 6 last night (Europe) and can't install updates...

    Try toggling Wi-Fi on/off on your iOS device.

  • My iphone 4 doesn´t connect thorugh Wi-Fi, apple replaced my phone for a new one and it has the same problem. I have an ipod and it doesn´t have this problem. Does any one know what to do?? Thanks

    My iphone 4 doesn´t connect through Wi-Fi, Apple replaced my phone for a new one, but the new one  has the same problem. I have an ipod third generation and it doesn´t have this problem. Having compared both working at the same time, the iphone alsways lags behind or doesn´t even connect to the internet via Wi-Fi. Does any one know what to do?? Thanks

    Have you ever checked to see if there is an update for your router? If yes, then power off router. Then on iPhone go into settings and do a reset network settings. Power router back on, and try connecting phone to router.

  • My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1

    My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1. I know there is LTE coverage at my house, since before I updated it, it could hop on to LTE just fine, in the same location. My Carrier is CSL Hong Kong. Does anyone have this problem? If so, does anyone have a answer to it?

    Hi AEEA-Family,
    I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
    I've just made the following changes on my Phone and all seems ok again.
    Here are the steps I took to resolve it on my phone.
    1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
    2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
    3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
    After I made all those changes I did a hard restart of the phone and now all seems fine.
    I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
    Hope this helps other people.

Maybe you are looking for

  • Setting up Sharepoint 2013 approval workflows depending on field value

    Dear Microsoft Support, I am still relatively new to Sharepoint-Infopath and would need help with setting up workflows for a requisition form I am creating. I have designed and created a form using Infopath 2013 and have successfully created the link

  • How to configure standby database in a single machine

    I am in Windows XP professional and oracle 9i . I want to configure a standby database for a database called proddb in the same machine. For doing this, I created a standby controlfile. But this work for the same name standby database?. How this happ

  • How to modify oracle stored procedure for JDBC Receiver Adapter?

    Hi all. This is Urgent. Scenario is   SELECT a TABLE with procedure and update column with it,   then send data to SAP System with RFC Adapter. When I executed a sync bpm, scenario was finished internal error. Pls, let me know how to correct procedur

  • Multiple Stock Valuation without AVR

    Hi, We have requirement to keep and book 2 actual costs stock valuation version which are according to IFRS and local. Understand that SAP standard solution is AVR. But we can't use it because our upstream business not using PP at this moment. Please

  • How to invoke a WebService with more than 1 value in parameter?

    I have a webservice, with a request parameter as an Array of String. In an invoing xml it should looks like: <GetPersonsData_Request> <request> <PersonIdList> <string> 111 </string> <string> 222 </string> <string> 333 </string> </PersonIdList> A prob