IPhone 3G - email works in wifi; doesn't work over 3G or Edge
Anyone else experienced this problem? Since the middle of this past week, my iPhone 3G cannot send or receive email from my POP account over the 3G or EDGE network. It works fine over WiFi however.
I took it to the Apple Store where they were able to reproduce the problem, but could not figure it out and promptly replaced the phone. The new phone has the same issue, which leads me to believe it must either be the network or my AT&T account.
I'm having the same exact problem. I am on my second phone now. Both phones worked originally and now it stopped working again.
Any solutions would be great.
Similar Messages
-
ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
first the the screen rotation is not working... Checked the settings and lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly.... come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily. -
IPhone 5 ios6.1.4 wifi doesn't work on any previously used network
Any suggestions? Can't get a wifi connection on my iPhone, my iPad will connect but not phone
Hi lain boyd 64,
Here is an article with troubleshooting suggestions for iOS devices and Wi-Fi networks:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers!
- Ari -
Hi, I installed on my iphone IOS 7 but now wifi doesn't work. It doesn't find any wifi connections around me. Please help me! What can I do?
My wifi had no problem connecting to our home wifi prior to the IOS 7 update, but since updating this morning it's not working. My phone will try to connect to wifi, but then I get the "Unable to join the network" message. I tried resetting network settings, but that did not solve it. I tried @bam11's suggestion of being in airplane mode first, but still no luck. I've had my phone open to the Wi-Fi page, and saw it connect a couple times for the slightest second, but it disconnected just as fast. My son as the exact same phone (4s) and he's connecting just fine! Any other suggestions? I'm afraid to hard reset my phone.
-
Hello to everyone!! I have a huge problem and I feel very angry grrrrr!!! My iPhone 4s has iOs 6.0.1 and my wifi doesn't work at all please dear apple do sth!!! help me!!!!!!
Κανε backup στο iTunes και μετά κάνε restore as new. Δηλαδή Settings>General>Reset>Reset all Content and Settings. Οταν τελειώσει θα έχουν σβηστεί όλα. Μην κανεις restore from backup. Δοκίμασε πρώτα νε δεις αν δουλεύει το wi-fi. Αν δεν δουλεύει πας στο service. Αν δουλεύει κάνε restore from backup. Αν το πρόβλημα ξαναεμφανιστεί τότε πρέπει να ξανακανεις restore as new και να το στησεις απο την αρχή. Αν δεν εμφανιστεί έχεις καθαρίσει. Μην ξεχάσεις να συγχρονίζεις επαφές και ημερολόγια πριν το restore.
-
Ever since I bought a Belkin blue tooth for my van my wifi doesn't work at home. My husbands still does. He has an iphone 5 and i have an i phone 4.
Hello lizreceptionist
Check out the article below for troubleshooting Wi-Fi on your iPhone
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.
SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck. -
Since update extended wifi doesn't work
I updated my express extreme as required. Since my airport express that I use to extend my wifi doesn't work anymore. I did a reset and when I try to configuration it keeps telling me that an error has occurred and that I should try again.
I reset modem and router. Still have the same issue. I have a laptop connected to the network as well as a PS3. Both are working great. Did a Speedtest app test on iphone. With 3g it was working good. When i switched to wifi, it was trying to get the ping test accomplished, and could not. it was stuck in the ping test at 0% for a long time and never progress.
-
Wifi doesn't work very well since ios6 download. Worked fine before update, help please
wifi doesn't work very well since ios6 download. Worked fine before update, help please
I reset modem and router. Still have the same issue. I have a laptop connected to the network as well as a PS3. Both are working great. Did a Speedtest app test on iphone. With 3g it was working good. When i switched to wifi, it was trying to get the ping test accomplished, and could not. it was stuck in the ping test at 0% for a long time and never progress.
-
email send/receive suddenly doesn't work (as of September 24th); I can't change email settings (one suggestion from tech) as BB phone won't accept *valid* username and password -- what to do?
I understand from a support note that if I keep trying my password/username combination, my BB will eventually delete all data!
I can't understand this. I'm completely lost now. I can't remember what I've done or tried to do. A plethora of usernames and passwords is swimming in my head.
Thanks for any hints. I have always loved this BB Bold and have never had any trouble with it.But the real question is why for the past year did the passwords work and then all of the sudden after this anomaly the disk password doesn't work? I'm not 100% sure of what my configuration was, but I know that most of the time it required one password -- supervisor, and occasionally it asked for 2 -- disk password as well I believe. This may have been related to the Password on Restart setting I think -- asking for the disk password on cold vs. warm boot. But I know both were exactly the same. But after this incident only the Supervisor password worked.
-
I have iPhone 5 and the touch screen doesn't work
I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
<Re-Titled By Host>Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
No data is loss doing a reset. -
I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes
The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it
-
Acrobat Pro X 10.1.6 attach to email, Mac Outlook 2011 Doesn't work, but Adobe Reader X 10.1.6 works
Acrobat Pro X 10.1.6 attach to email, Mac Outlook 2011 Doesn't work, but Adobe Reader X 10.1.6 works.......WHY?!?1?1?!
Past the contents of the install.log file in the forum. It's located at: /var/log/install.log
-
M3800 Developer Edition: wifi doesn't work after sleep
I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
Relevant ouput:
lsmod when problem exists:
iwlmvm 217725 0
mac80211 652718 1 iwlmvm
iwlwifi 179412 1 iwlmvm
cfg80211 494362 3 iwlwifi,mac80211,iwlmvm
rfkill list when problem exists:
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
May 4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
May 4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
May 4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211: DFS Master region: unset
May 4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
May 4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
May 4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
May 4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
May 4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
May 4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
May 4 08:23:16 jonathan-m3800 ModemManager[852]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
lspci:
06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
After reboot:
lsmod |grep -i iwl:
iwlmvm 217725 0
mac80211 652718 1 iwlmvm
iwlwifi 179412 1 iwlmvm
cfg80211 494362 3 iwlwifi,mac80211,iwlmvm
rfkill list after reboot:
0: nfc0: NFC
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: noWi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591 -
Why the wifi doesn't work after the upgrade to iOS 5?
The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.
Try a hard reset first to see if that does any good. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
iOS: Unable to update or restore
B-rock
Maybe you are looking for
-
I am attempting to connect my 2010 MBPRO to my Samsung HDTV. I purchased the Dynex mini display port to HDMI adapter plugged it the computer and attached the HDMI cable. When attaching the computer screen flashed blue then goes back to normal. Mea
-
ISupplier Portal : Display Link based on specific supplier
I have a requirement of adding a link to the isupplier pages facing the supplier and the link opens an XLS file. I was able to add the link through personalization and now every supplier sees this linked file. How do I restrict only few suppliers to
-
My music became "other" info in my phone. How do I delete it?
I have a 4S with iOS 8.1, and my music became "other" info in my phone. How do I delete "other" info? Now I don't have space for my music.
-
My Lightroom 3 has just stopped working. It was version 3.6 and when I went to use it yesterday it just shutdown on me and threw me back to my desktop. I removed it and reinstalled it but the same thing happens....any ideas?? Cheers Chas
-
Hi All, Iam working on SLA. I have configured the SLA to my knowledge. The problem now it the comopletion date is not getting calculated for the tickets that is created. Where exactly is the configuration that i have to for the compeltion date and ti