IPhone 3g headphone & dock port protection

I'm looking for some silicon/hard plugs for the headphone jack and dock ports - does anyone know where I can get these? I know you can get them with the iSkin but I already have a case and just want the extra plugs, if they're available.
Thanks.

The SwitchEasy colors cases include plugs for the headphone jack and docking connector, look great, are inexpensive, come with extra screen protectors.
I own several, and highly recommend these cases.
http://www.switcheasy.com/products/Colors/Colors.php

Similar Messages

  • Cleaning Lint/Dust/Dirt From the Docking Port, Headphone Jack, Mic & Spkr

    Does anyone know if you spray canned air (Dust Off) into the docking port, headphone jack, mic & speaker ports, if the air will blow the lint/dust/dirt deep into the phone or possibly under the screen where you can't get it back out?

    i just use a toothpick and dig it out. the dock port and headphone jack are fairly closed off so the chance of pushing the lint / gunk in deeper is pretty low. so far no issues

  • Bought iPhone 6 yesterday. Also bought dock works with iPhone 5/5s. And cord connecting iPhone 6 to USB port on car stereo. No sound comes out of dock or car stereo. In store today, iPhone 5 running ios 8 worked on dock, not iPhone 6. When Apple fix?

    I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?

    The iPod feature that plays through USB in my car does not work with my iPhone 6 either.  I called AppleCare and they said that the car audio system will need a firmware update.  Don't know if Apple is just passing the buck, but that is what I was told.  Thank you for posting.  I know now that I am not the only one.  Thanks also for posting about the iPhone 5 running iOS 8.  I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6.  I guess I will just be using Bluetooth in my car, at least for now.

  • Iphone 4 was water damaged has had new battery as wasnt charging and new docking port and it comes on to apple logo now then off after 10 to 15 secs and reboots any help please

    water damage iphone 4 was coming on when plugged in but not charging and not holding any power so changed battery it then worked untill battery power ran out and would not charge so changed the docking port and now it comes on with apple symbol and switches back off after 10 to 15 seconds like its rebooting and then just keeps repeating any help please

    Help with what? Apple does not repair iPhones, they replace them. Apple does not sell parts. There are no legitimate sources for iPhone parts.
    Talk to whoever did the initial repair.  Odds are the logic board is damaged.  It's probably time for a new phone.
    Your phone is no longer eligible for a discounted out of warranty replacement.

  • No sound from iPhone 5 headphone port stopped working

    No sound from iPhone 5 headphone port stopped working

    Try a restart.
    If no effect, then try a reset.
    If no effect, then try a restore from backup.
    If no effect, then try a restore as new.
    If no effect, likely a hardware issue, and you should schedule an appointment at a local Apple store.

  • W520 Owners: Compatible Splitter for combo Headphone/ Microphone Port

    The w520 has a combo Headphone/ Microphone Port. You can use either a headphone or a microphone but NOT both UNLESS you have a ...
    1. Headset with special 3 ring jack  such as
          a.  ThinkPad In-Ear Headphones (#57Y4488)
          b. 3.5mm TRRS Plug type Headphones for Smartphones  (e.g. iphones, etc.) -- so you use the same headphone/mic you use for your cellphones (but lesser sound quality)
     2. Splitter - so you can you use your own microphone and your own headphone/ stereo speaker (for better sound quality)
    This solution was found here...
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Where-is-the-Stereo-out-on-the-W520/ta-p/47306...
    But a list of Compatible Splitters was not listed...
    The aim of this thread is to verify and list compatible Splitter for W520 combo Headphone/ Microphone Port
    The specs of the splitter are as follows: (Kindly verify if correct)
    3.5mm (1/8") TRRS male plug  (aka Smartphone plug)  TO 
     3.5mm TRS Audio-Out Jack/ female plug  AND 3.5mm Microphone-In Jack/ female plug
    I browse online and found possible splitters. (In no particular order)
    1.  Sound Professionals Part# - SP-SMARTPHONE-CABLE
    http://www.soundprofessionals.com/cgi-bin/gold/item/SP-SMARTPHONE-CABLE
    --it was mentioned in the details tab that it is compatible with " Lenovo T410, T410s, T510, X, L & Edge computers"
    so it is possible that W520 is compatible if the other Lenovo have the same combo port
    - nickel contacts
    2. Headsetbuddy Gold PC Computer Headset to 3.5mm Smartphone Adapter (Part# 01-PC35-PH35G )
    http://www.theheadsetbuddy.com/gold-pc-computer-headset-to-3-5mm-smartphone-adapter/
     - it was mentioned "Convert two 3.5mm plugs to single smartphone 3.5mm headset plug (TRRS) with mic and audio"
       so it fits the specs but I am not sure if it was tested for W520...
      - gold contacts.
    3. Headsetbuddy Gold PC Headset to 3.5mm Smartphone Adapter (Part# PC35-PH35G )
    http://www.theheadsetbuddy.com/gold-pc-computer-headset-to-3-5mm-smartphone-adapter-1/
    - same description as above but different part#. I am not sure if this is the same product or just a typo error on their website.
    -gold contacts
    4. Headsetbuddy PC Computer Headset to 3.5mm Smartphone Adapter (Part#01-PC35-PH35 )
    http://www.theheadsetbuddy.com/pc-computer-headset-to-3-5mm-smartphone-adapter/
    -  - it was mentioned "Convert two 3.5mm plugs to single smartphone 3.5mm headset plug (TRRS) with mic and audio"
       so it fits the specs but I am not sure if it was tested for W520...
      - nickel contacts
    5. KV Connection iPhone 1/8 inch microphone and headphone adapter - 3.5mm 4 conductor TRRS Male to 3.5mm TRS Jacks (Part# KM-IPHONE-2TRS)
    http://www.kvconnection.com/product-p/km-iphone-2trs.htm
    It was mentioned that they have  "Premium shield coax a/v cable for EMI/RFI interference...DC blocking protection ... microphone impedance matching"
    They say it will "work with most 3.5mm mono or stereo microphones except for for unpowered ECM (electret condenser mics). If your microphone is an ECM without batteries then this special version of the adapter KM-IPHONE-2TRS-ECM is the adapter you would need."
    So I guess the the type of microphone will have an effect also on what splitter to get.
    On this site..
    http://www.wfu.edu/~yipcw/lenovo/2011/T420s/review/
    It says that on using the Part# KM-IPHONE-2TRS, with a "mono mic [Sony F-V410 cardioid imp 600 Ω vocal] in , it reverts to internal microphone for some reason.) and headphone"
    So there can be incompatible mics for any splitter you use... OR is the defective splitter or the computer setting that is wrong...???
    -nickel contact
    6. KV Connection iPhone 1/8 inch electret condenser microphone and headphone adapter - 3.5mm 4 conductor TRRS Male to 3.5mm TRS Jacks (Part#KM-IPHONE-2TRS-ECM)
    http://www.kvconnection.com/product-p/km-iphone-2trs-ecm.htm
    -On site it says "This adapter is specifically for unpowered ECM (electret condenser mics).  If your microphone is an ECM with batteries then the standard adapter, KM-IPHONE-2TRS is the adapter you would need."
    -nickel contacts
    7. eVerbatim splitter
    http://www.everbatim.net/store/index.php/hardware/microphones-audio/headphone-microphone-jack-splitt...
    - It says "This adapter has been designed and tested to work with all current Lenovo ThinkPad computers with a combined audio (VOIP) jack running Windows 7.  Some ThinkPads that have the combined jack and that are running XP do not work with the adapter, which is a software issue and not a defect of the adapter. "
    -nickel contacts
    8. Startech 3.5mm 4 Pin to 2x 3 Pin 3.5mm Headset Splitter Adapter - M/F (Part# MUYHSMFF)
    http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Pin-to-2x-3-Pin-35mm-Headset-Splitter...
    It says "allowing you to add a mono microphone input as well as a stereo output to your PC or Laptop, through a single 3.5mm audio port." 
    -nickel contacts
    Kindly tell if you have used any of this on your laptop. And tell...
    1. Compatible with your headphone? (what kind you use)
    2. Compatible with your microphone? (what kind you use)
    3. Any problems with sound?
    I hope we can continue this thread to list the compatible splitters for the Lenovo Thinkpad W520... Please do add if you have seen other brands.
    Thanks

    Hi all
    To be frank, some of the multimedia laptops, with SRS Premium Sound, etc. are having the same speakers as W510 / W520 and is very loud (AFAIK, Dell Inspiron N5110 have the same speakers as W520 and the placement is just below the palmrest like surround sound). Theoretically, it makes the sound less focus and soft, but it works well with that laptop. 
    The Mic and Speakers are powered by the amp / drivers. The hardware in fact is very good, the only problem with it is the driver / software not well written. Good Hardware + Bad Software = Bad Product.
    If you want a better sound / mic, you could try my Dolby Home Theater v4 solutions, hopefully it could meet more than your expectations and solve your problems without any cost. In fact, Dolby GUI is more customizable than Conexant. Most of us would not think it's more complicated, as techies would prefers more options to have fun.
    1. I don't even need a external mic, an internal mic does the job with this fix.
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-bad-microphone-Usable/m-p/528497
    2. Dolby makes the sound much better and louder with correct settings. If not, my post are not able to stay active till now, reaching 100+ posts.
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Lapt​ops/W520-Sound-Enhancement-Thread/td-p/442761/pag...
    Installation steps:
    Simplifications of installing and optimizing Dolby Home Theater v4 threads. Message 77 and 78 + Attachment.
    3. Get a USB solution only if you need multichannel audio, stereo / wave mix or studio grade quality, if you are just using for entertainment, etc. W520 with Dolby Home Theater v4 should be more than sufficient.
    Cheers 
    Peter
    =============================================
    Does someone post helps you? Give them a kudos as a reward, as they will do better to improve 
    Mark it as solved if the solution works for you, so it could be reference for others in the future 
    Refunded Set: W510, 4876-A11
    Current Set: W520, 4284-A99
    Dolby Home Theater v4!:
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Lapt​ops/W520-Sound-Enhancement-Thread/m-p/451401#M155... 

  • HT5858 iPhone thinks headphones are connected

    My iphone 4S with iOS 7.0.2 won't put any sound to the speakers because it thinks there are a headphones connected.  I have some bluetooth headphones, but I have bluetooth disabled.  Any ideas?

    Hi jeberhardt,
    Thanks for visiting Apple Support Communities.
    I recommend trying these steps if the iPhone incorrectly registers that headphones are plugged in:
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    These steps come from the related troubleshooting article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best Regards,
    Jeremy

  • My ifone4s is no longer producing sound..i am running iOS 6.1.3...i have tried reset,restart,restore----no avail....u have cleaned the dock port and speaker and mike----no avail...this is a replacement product from apple (march 2013) HELP apple!!

    Hi there!!...my ifone4s is no longer producing sound of any description with the exception of the earphone jack!!! I am running iOS 6.1.3....i have tried reset,restart and restore----no joy....i have cleaned the dock port and speaker and mike area ----no joy! Now my question,,,is this a hardware malfunction or a bug from the iOS???..this is a replacement fone (march 2013)  my previous fone suffered a wifi antennae breakdown after an iOS update!!,,,covered under warranty...this fone is now given trouble,,is this fone covered under warranty surely li should get more than three months outta my new fone - no???...any advice or help from anyone will be greatly appreciated especially as regards warranty...thanks in advance for looking...

    If you use eabuds or headphones on occasion, try inserting and removing the earbuds/headphones several times in a row.
    An exchange under warranty remains under the same warranty period as the original purchase. If an exchange under warranty is provided within the last 90 days of the warranty period, the exchange includes a full 90 days of warranty coverage.

  • IPhone 3G Universal Dock Adapter + dual dock(bt)?????

    has anyone tried this? I had iphone and apple bt(which *****),
    dualdock was good as it could hold both of them and keep them pair.
    Now things got ugly, 3g iphone doesn't come with dock, and they sell 3g dock
    but not 3g dual dock, so I have to either use travel cable or put 3g iphone
    in 3g dock and bt in dual dock(or travel charger), which is completely
    waste of space and usb port.
    So how's this combo? iPhone 3G Universal Dock Adapter( http://store.apple.com/us/product/MB546G/A?fnode=home/shopiphone/iphone_accessories/cablesdocks&mco=MTI3Mzc4Mg&p=1&s=topSellers ) + dual dock
    does it work? has anyone tried? I'm sure it will look ugly but if there's
    no plan for 3g dual dock, then I'd try it...

    Thank you for your response -- (its my first ever response) -- Universal Docks that have the large round IR window on the front are OLD Universal Docks and they will not work, they are for the older ipods before the video ipods came out. They also have a SVIDEO port in back. again these are for the old ipods. the newer Universal Docks have a small slot for a IR window and these are the new NON_SVIDEO versions and they my friend do work with the iphone/video ipods and of course the latest Iphone 3g -- if you purhcase the latest AV cables that connect at the bottom of the device...

  • My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker

    My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker so I can listen to my music and games.  Is it hardware or software problem?

    I was told by a friend that sometimes when you use a 3rd party charger that the connectors are not the same size and so it can affect the sensors in the phone and make it seem like it is in a docking station and so changes the output for dock speakers.  With that said, I didn't take my pohone in to be serviced at the appple store because it was a 3GS and over 2 years old and so not covered by any service plan.  Since then my phone is back to normal and I can use my headphones and listen with the speakers on the phone.  I stoped using the suspected cheap 3rd party charger and maybe that's what did it, but not sure if it was or wasn't the cause of my problem.  I'm glad that my phone is better I was kinda holding out for the Iphone 5 when i comes out later and hope my phone lasted until then.

  • Docking Port

    There is no mention in the manual as to what if anything can be done through the docking port, ie audion video playback, anyone have any information on this?

    Hello and Welcome to Apple Discussions. 
    The iPhone manual (link 10Mb PDF) only mentions Audio Line-Out on the iPhone Dock.
    mrtotes

  • IPhone 3G headphone socket/connector question

    Morning all,
    When you're listening to music and a call comes through, it's routed through your headphones. If I were listening through speakers connected to the bottom of the iPhone (like a dock, for example), would the voice be played through the speakers?
    Thanks,
    Andrew

    The answer is no.

  • Iphone 4 headphone socket not working headphones won't go all the way in

    My iphone 4 headphone socket not working, the headphones won't go all the way in? any help, ideas?

    I bough a new ipad two a few feels ago and still haven't managed to used any headphones with it.
    It's very annoying as I'm currently in hospital and will be for a few more weeks and this being the reason I bought it!! Now I have to have it on very low volume and not use it in the evening  

  • How to connect my guitar into my new 13'' macbook pro using headphone's port?

    how to connect my guitar into my new 13'' macbook pro using headphone's port?

    you need a standard guitar cable and a 1/4 inch to 1/8 inch adapter such as this http://www.amazon.com/Recoton-CW1521-4-Inch-8-Inch-Adapter/dp/B00006HOIW

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

Maybe you are looking for

  • "iTunes has stopped working" during every startup

    Every time I try to open iTunes, it says iTunes has stopped working. When I open it, it actually works for a good two seconds before it crashes. I've tried to play one of the songs by double-clicking one of the albums and it starts to play until it c

  • Transition executed only once in a TableRow

    h1. SCENARIO h3. Model /* Model is a Person containing a flag active */ class Person {    private Boolean active = false;    /* more fields and methods */ h3. View /* The View is implemented in FXML */ class View extends TableView<Person> {  }----- h

  • Sort an array of Application Class with respect to property

    class MyClass property string myProgram; property string myType; property string Description; end-class; Local array of MyClass &myProgArray; &myProgArray.Sort("D"); I want to sort the Array in descending Order with respect to "myType". How to provid

  • Desformat=spreadsheet  blank rows and columns

    Hello, With Oracle Reports 10g R2, I'm trying to generate EXCEL report output using desformat=spreadsheet The excel report output is being generated with one blank column between each data column and 2 blank rows between each data row. Any clue to ge

  • ITunes 6.0.4 Sharing stopped working

    Hey, I've just updated my iTunes to the latest 6.0.4, and now sharing doesn't work ... I've got a Linux, Mac, and Windows server, and the Mac is the only one that can't load the shared libraries. (all 3 systems have shared libraries). When I click on