IPhone 3G is completely fried - will not boot at all!

Last night I did an App Store update (for AirHockey I think) and left my iPhone 3G to it over WiFi.
Came back after 30mins or so and there was the Apple logo, strange it rebooted, no matter.
Wait an hour, still the Apple logo and it's getting a little warm now.
So, hold down the Sleep/Wake and Home button to reboot - another hour of the Apple logo.
So do the same again, but plug it into a charger and leave it overnight - still the Apple logo.
Tried plugging it into my PC this morning - it can see the iPhone. The scanner/camera wizard comes up and there are my photos but the phone's still displaying the Apple logo, and now iTunes has completely frozen too!
Leave it for 30mins, still nothing changed.
Unplug the iPhone and iTunes comes alive but still no joy with the iPhone.
I'm in the UK, so where do I take it back too - I'm without a phone and my iPod now (gutted!)?
This is purely to do with iPhone and not my computer - I've not plugged it into a computer for at least a week before this as I sold it!
Yours,
Chris

sorry, but you are simply wasting your time.
and if its being repaired, your phone is simply branded as a refurbished model now, instead of new, why on earth would you do that?
it is NOT an hardware issue, if you read these forums, you would see the 1000's of people having the same problems, its purely a software issue, either itunes or the firmware.
you will get your refurbished iphone back, and it will only take a day or 2 for you to meet this problem again if your updating your apps.
so basically, you have turned your new phone into a refurbished model, and wasted (a few weeks?) of your time with your 'new' iphone.
sorry to be harsh, but that IS how it is.
Message was edited by: csj85

Similar Messages

It rained in my window last night, on my power strip. My macbook adaptor (charger) and iphone adaptor were both plugged into the strip. The power strip is dead. Iphone is fine. Macbook will not boot up and charger light doesn't go on.

It rained in my window last night, on my power strip. My macbook adaptor (charger) and iphone adaptor were both plugged into the strip. The power strip is dead. Iphone is fine. Macbook will not boot up and charger light doesn't go on. I borrowed another charger and still no luck. What should I do? (Charger wasn't plugged into Macbook until I dried it off.)

Spill Cleaning
And, don't think that just because it was two teaspoons and not a glassful that there is a difference.
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).
Do not put in a bag of rice in as much as rice will get into the ports and optical drive and do further damage.

IMac will not boot up, all I get is white screen help

MY iMac will not boot up, all I get is white screen?
what do I need to do to start machine please?

Start with a google search for white screen site:apple.com and peruse the many hits.

HP Pavilion Slimline s3707c PC will not boot up all the way

HP Pavilion Slimline s3707c PC will not boot up all the way; gives the following message:
Entering Setup
<F10=setup> <F11=System Recovery
<Esc=Boot Menu> <F9=Diagnostics>
Tried to install recovery disc; did not respond.
[Personal Information Removed]

Hi wjackson95,
When you get to the screen mentioned below, can you press the F11 key to enter the Recovery system that is on the hard drive? Alternatively, if you can press F10, you can go into the BIOS and change your boot order to put your disc drive before the hard drive so that the PC boots to your Recovery discs. NOTE: You may have to press F10 or F11 multiple times to get it at the right time.
You might consider opening your PC to see if it has dust buildup. If your PC has overheated, it can cause it to not boot. It can also cause heat damage to the interal parts.
For more detailed boot troubleshooting, see this HP Support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00899280&cc=us&lc=en&dlc=en&product=3882331
Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I have reset my ipad using General Reset Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?

I have reset my ipad using General > Reset > Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?

When you restore, you can restore to factory settings or to a backup. Restoring to factory settings removes everything and takes you back to out of the box status and you start all over again. Restoring from your backup will replace all of your app data, bookmarks, email settings and things like that. You still may need to sync all of your purchased apps and music, photos and so on back to the iPad.
I assume you want to restore from your backup to put all of you data back on the device so connect the iPad to your computer, launch iTunes, right click on the device name on the left side under the devices heading and select restore from backup. After you restore from your backup, make sure that you sync all of your other content with iTunes.

My MacBook Air will not boot up all the way.

My MacBook Air will not boot up all the way, it only allows me to sign in and then it stays on a white screen. I tried restarting, rebooting, recovery and smc reset. Nothing works, it stays with the same problem. How can I fix this?

Try a safe boot:
http://support.apple.com/kb/HT1564?viewlocale=en_US
Ciao.

IPhone 5c OS 8.2 will not boot up and hangs on apple logo

I have upgraded my 5c to 8.2 and reset all the settings so that I can transfer the user , it now will not boot past the apple logo , can anyone help?

Hi battye,
Welcome to the Apple Support Communities!
In this situation where your iPhone will not start up past the Apple logo, there are several troubleshooting steps I would recommend. Please use the attached article as a reference to troubleshoot.
iOS: Not responding or does not turn on
Have a great day,
Joe

Xserve will not boot up, all lights flash rapidly

Just bought a lightly used Intel Xserve. This unit was in a business that failed, and was set up, but never used. Was powered off and unplugged for approximately 18 months. When we tried to plug it up to check it out & configure it, we noticed the following:
System will not post and won't boot
Hard drives do not appear to spin
CD Drive appears to have no power - will not grab disk
All fans do work, and run on high RPM
All lights on back of server and front of server, as well as next to SDRAM slots, and on back of main board flash / flicker (regular quick flashes, no pattern evident). The only light that does NOT come on at all is the light next to the power button.
Anyone heard of a similar condition? Is this server toast?
Thanks,
Rob Hogan

I'm sorry to say I don't have a solution, but I can commiserate.
I have a G5 and two G4's, and so far within a few days / couple of weeks of getting them home and getting them up and running, they seem to fail.
Usually spectacularily.
The G5 operates very much as yours in that power on, fans rev high, and no post or other activity; I don't get any system light status action however other than flashing. I've replaced CPU's and logic board on this.
The single CPU G4's does much the same, but this I've had up and running and then it went down when I upgraded the memory to max (very careful to make sure it was within Apple spec's), and despite swappinbg the original memory back in,nothing.
My latest, a dual core G4, was bought in working order, and I upgraded this from 10.4 to 10.5. Running nicely as a internet gateway. Went away for weekend so put it into sleep mode. Came back, power button on front panel stopped working, and one of the raid slices on the system drive failed.
Tried to repair this and system now no longer boots, but freezes on loading OS (spinning disc stops in mid spin) and it will not boot from installation disc via firewire or internal DVD drive (swapped in a replacement to ensure it works). The installation disc stops at the apple splash screen, but goes no further.
I can, helpfully, get into Open Firmware mode, so something is working on some level. Sadly, I can't seem to find a copy of the Apple Hardware Test for this machine (see my post on this) to check it out.
I can tell you that I'm getting very adept at working with Xserve hardware, if not very effectively.
My working hypothesis on this is that there is some issue with these units being used 27/7x365 for however long, and then being left 'off' for a prolonged period.
Thinking that whilst they are designed to operate reliably as constantly on and working under load, so facet of being 'off' breaks 'something'.
If really pushed to go out on a limb, I'd theorise that under load the electronics/IC's settle into position, but then when switched off things cool down, contract, and causes weaknesses in electrical connections to occur. When next used, these then start to fail, giving a pattern of initial operability followed by delayed failure with a cascade of increasingly servere symptoms until terminal failure is reached.
But that is wild, uneducated, conjecture.
So, no help, but I comiserate.
XD Andy
btw, is anyone has some useful advice for me on where to find the AHT 2.0.1 for Xserve or even just the part number ... ... ...

My 13" MacBook Pro will not boot up - all I get is blank screen

The MacBook Pro is only 10 months old and is up to date on all OSX updates. I have been using it all day and suddenly this evening it just went to a blank screen and will not boot up. No fan, nothing. Nada.
I have tried the following:
checked magsafe and it is clean of any dirt
checked battery (pressed button on side of Macbook and got 6 green lights coming up)
There are no USB peripherals connected
tried pressing CMD+CNTRL+Start button and nothing happended
tried holding down start button for 30 seconds
The mac has not been dropped or had water on it.
Any other ideas?
Cheers

Which OS do you have...if it is Snow leopard then press shift while starting up, i.e., immediately after pressing power button
if the os is Lion or Mountain Lion press command+r to goto the restore thing and then disk utility to rectify your problem

Urgent: Power out - complete System will not boot

The power was shut off abruptly
root and usr are only filesystems mounted
Thus, can not init or boot...
shutdown gives this error:
showmount: sunfire: RPC: Rpcbind failure - RPC: Unable to receive
Do you want to continue? (y or n): showmount: sunfire: RPC: Rpcbind failure -
RPC: Unable to receive
Shutdown aborted.
any suggestions as to a solution??
would simply powering off then on really destroy things ??
Thanks

Please help. Have similar problem. After power out abruptly, cannot return to i6 state. System remains in single user mode. Tried running "reboot -n" which gave me a message to run "fsck -F ufs /dev/rdsk/c0t0d0s5". I did that, but still will not boor to multi user mode. This is the error msg I get:
"Shutdown started. Sat Mar 3 20:15:17 EST 2007
Changing to init state 6 - please wait
showmount: servername: RPC: Rpcbind failure - RPC: Unable to receive"
Any idears are very welcome

Please help! MBP 15" 2011 will not boot at all

Hi,
My 15 inch early (May) mbp 2011 will not start up. Here is what I have observed so far:
1) When power button is pushed (without MagSafe attached) hard drive will spin up and about after 3-5 seconds it will turn off (hard drive spins Down, no further boot process) No chime, no led indicator light in front.
2) When power button is pushed (with MagSafe attached) hard drive spins up, keeps spinning, but no further boot process. Just black screen and spinning hard drive.
3) When attempting SMC reset, fans turn to high, and screen remains black, still no boot)
4) Since mbp fails before booting, PRAM/NRAM resetting is not a possibility. (Tried)
5) I have also removed the battery cable from the logic board, and tried resetting without any luck.
6) I entered CD into optical drive - it "ate" it, but will not eject now. (Tried holding eject/left mouse/control e etc) still nothing.
7) After letting mbp rest for 1 day, it booted fine like nothing happend, worked fine for 1 day, then next morning back to square one. Now 5 days later still nothing.
If anybody has any ideas what could be wrong, or have possible solutions, please don't hesitate.
Thanks in advance, Oliver

Hey there Oliverkehn,
It sounds like your computer is not booting up at all at this point, even after some very thorough troubleshooting you've already done. From the following article, I would use these steps that I don't mention as having been tried just yet:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
Regards,
Sterling

P45 neo2-fr system will not boot at all

CPU: Intel 2Duo, 3GHz, LGA775
MOBO: MSI P45 NEO2-FR
RAM: 2 x 1GB Kingston DDR2 , 800MHz
VID: 2 x Asus EAH4850, ATI crossfire
HD: Seagate Barracuda 750GB SATA
Power: Antec 850W TruePower Quattro
Optic drive: DVD/CD burner
I cannot get this system to boot up. Everything powers up. The hard drive is spinning, the fans on the vid card and CPU are spinning, and the CD drive lights up and seems to “POST”. Nothing comes up on the screen (and I’ve checked the monitor, it works). There are no POST beeps either. I had assembled the entire machine (dual vid cards, and two other PCI cards), but when it did not boot, I started the troubleshooting.
I’ve tried an IDE HD. That didn’t work. I’ve even took out all the RAM to see if I could even get a POST beep…nothing. I have the setup now at its basic build; CPU, RAM HD and one Vid card.
Does anyone have any ideas or know of what the issue may be?
thanks

The machine it back in it's case with all cards and connections and is booting up with the OS that is on the HD (I'll be wiping it for this new config).
I put paper washers between the mobo and risers, that was a trick in itself.
So as of now, I'm good to go. Now comes the software terrors. But that's for another thread...
Thanks again Jack!

My iphone 4s is dead and will not charge at all. But keeps blinking the battary sign and the lighting bolt and charger but wont work. WHAT DO I DO!!!

Please help.. My phone will not charge what so ever! and i plugged it into about 5 different chargers that do work on other devices. Ive cleaned with alcohol, and held the home button and top button for 20-30 sec. but still nothing. What should i do!!!

sounds like the battery has reached the end of its life. Bring the phone to Apple for battery diagnostics and possible battery replacement.

Macbook Pro will not boot, at all!

Hi all, Thanks in advance for this...
Specs: Macbook pro 2010 model with Snow Leopard (updated recently). 250gb Seagate HDD
I shall start with yesterday, when i let my battery drain to nothing so that it could be recharged fully and effectively.
Afterwards i booted up the Macbook fine with no problems and it sat there charging to 100%.
I shut it down the normal way and returned to it about an hour later when the following occurred:
Upon starting i received the apple logo and the spinning wheel, accompanied by the loading bar which gives up halfway and turns the computer off.
I have tried the following to rectify the problem:
1: tried running the install DVD to boot up into Disk Utility to repair any file corruptions possible, but the spinning wheel and logo just sits there forever not doing anything.
2: Tested the Hardware by using the common check (forgotten how i did it) checking the RAM state and other logic board functions but it came back clean.
3: I ran single user mode - /dev/rdsk0s2 to try and find out the status of files but it Exited under Signal 8 Saying - The volume Macintosh HD could not be verified completely.
4: Based on other forum subjects relating to the signal 8 problem (HDD failure), i swapped HDD and placed one in that i know works hoping to install OSX onto that drive. But again, it holds at the spinning wheel and doesn't go any further.
5: any other commands i tried running under single user mode just brings back: Permission Denied -/dev
6: Tried using my Windows machine as a donor DVD R drive to install, but the Macbook won't give me anything else except 'Macintosh HD' drive when i hold down the 'Alt/option' key, aiming to use the network to my advantage and rule out Optical drive failure on the Mac.
I am running out of options here, i would like to try and install OSX via Memory stick but i have only a windows Xp desktop machine here to help me and it cannot read all the files on the install disc to copy over. Also i do not have the money available to download expensive software to help me.
Stupidly i haven't been able to back up my files and hopefully this Friday coming i will be able to copy all files over to my Mums Macbook as i cannot access the GUILD protected drive on Windows.
Now the way i assume things have happened is by the following: Letting the battery run flat has corrupted a few files which in turn won't let the Mac boot up anymore, But i cannot rule out the Optical drive failing unless i work out how to install OSX off of a Memory stick (bearing in mind i don't have another Macbook to hand until next friday). If the Optical drive is fine then i can only assume that the logic board is dead?
I need to fix this problem ASAP and i have no other ideas on what to do, hopefully you guys/girls can give me some extra field to play on.
I would take it to Apple but i'd rather get some advice before i take that route, Ideally also because i have lack of funds to help me here!

Applejack is just a command-line "front-end" for a number of different command-line tools you can use in single-user mode, and I'm not sure whether it's Lion-compatible. You can always try booting into single-user mode and executing:
/sbin/fsck -fy
That's unlikely to solve your problems, though. Since you can't boot from two different hard drives and your optical drive, that indicates there's a more serious hardware issue, or multiple hardware issues.

Slow and now will not boot

I have a 10 month old 20 imac, and it had been running a little slow and was going to upgraded the memory in the next week. But now it will not boot at all.
Last night it locked up I restarted and verified the disc, it passed. All the hardware passed. I started to try and back up my file from thecomputer and came up with file unreadable then it locked up again and now it will not boot. It chimes shows the apple screen then freezes on the blue screen. I have tried the safe boot, to run the test from the install disc, boot from the disc and all I get is a blue screen..
I seem to be reading about what seem to be a lot of the I macs suddenly slowing down, and from what I am gathering it seems MAC may have a batch of hard drives that fail around the year mark, with no warning until complete failure.
Does anybody have any suggestions

Hi CC
I have a 7 month old 20" iMac and have had no problems. Suffice to say, you should definitely take your 10 month old back to where you bought it. Locking up and freezes and it passed the AHT sounds scary.
Return it.

IPhone 3G is completely fried - will not boot at all!

Similar Messages

Maybe you are looking for