IPhone 3G is now super slow after 10 months or so usage??
My 3G phone has been working fine for about 10 months, but within the last months or so it has gone into slow motion, and I do mean SLOW motion.
Examples
1. Sending a picture, click on the "Email Photo" button, it takes about 15 seconds just to bring up the Email with image, then when I try to type in To: address it stays on the first letter I type for about 35 seconds (letter enlarges but just stays there) - this used to be instantaneous.
2. Messages, press the message icon and it takes a good 10-15 seconds before I see a list of people who I've messaged (this used to be 1-2 seconds).
3. Press on the iPod icon and again another 10-20 seconds before I see my playlists. Again, this used to take 1-2 seconds.
Now my iPhone never used to be like this, it was pretty fast for the first 10 months of usage. I haven't loaded any new apps (in fact I'm only at 2GB mem usage out of 8GB) and it's upto date with latest firmware and software. Doesn't seem to matter if I use wireless or 3G connection, nor if I have it plugged in or not.
I'm about ready to toss this phone out the window and go with something other than an iPhone. Is there any diagnostics I can run on my iPhone to try to figure out why it's gone into slow motion mode??
I've seen these types of problems happen with SSD drives where the MLC NAND flash starts to get flakey with no TRIM support (especially MLC) causing performance to radically drop off -- this is exactly what it feels like in my iPhone. Considering my 3G iPhone uses Samsung's 65nm 8GB MLC NAND flash which has been known to exhibit this problem over time, that's my guess as to why my iPhone has started to slow down.
I know several friends who are also running into identical "slow down" problems and they're in the same boat, toss the iPhone and go with a phone that uses better quality (real longer life) MLC or SLC NAND.
I know Apple aren't going to admit to anything unless enough people complain, so I was wondering how many other folks have run into this "mysterious slow down" problem after 10 months of iPhone usage?
Rob.
Hi Lawrence,
I've done the "RESET" Power down and Power up. Haven't done a reset and restore yet. The Reset seems to have worked for now, but what seems to happen is that after using Safari for a while it will start to slow down again until I do another Reset.
Guess I'll just keep doing a reset once a day, but definitely not optimal way to use my iPhone. Apple break something in one of their updates that would cause this? Any diagnostic tools for the iPhone that might show me memory usage/processing etc. etc.
Thanks, Rob.
Similar Messages
-
Macbook pro running super slow after downloading Lion
My mac book pro is running super slow after downloading Lion. Its so slow and all I see is the beach ball wait icon. Also my safari and firefox internet apps crash like crazy. What can I do? Hate it!
Hi,
I also have this problem. My MacBook pro was brand new in august, but i bought it just a few days before the release of lion so i installed lion after i bought it. Only used it 1 day with whatever was on it before and seemed to work fine.
Ive been too busy to do anything about it but im very annoyed by how slow it is so i have to do something now, what can I do? can someone help with some specific steps? someone posted something about changing the network settings but I wasnt sure if that applied in europe (spain)... any guideance in non-technical terms please?
THANK YOUUU -
My iPhone 4 has become dead slow after the iOS upgrade. Any pointers pls?
Hello All,
My iPhone 4 has become dead slow after the iOS upgrade. I use the phone for business purpose and it has become painful to use the phone becuase of the poor performance.
I don't want to change phones based on iOS releases. Any suggestions would be appreciated.
Thanks,
AmritHow to update my iPhone4,iOS 7.0.6
-
IPhone case has still not arrived after months of waiting
My free iPhone case has still not arrived after months of waiting. Has anyone gotten their free case yet?
I have the same problem, so have many others.
http://discussions.apple.com/thread.jspa?threadID=2635350&tstart=0
There was no record of my order. I spent over an hour on two calls to Apple, and they refused to send me the Griffin Motif that I originally ordered. The rep. I spoke to said to be patient, it just might show up, but at this point I doubt it. -
Safari is now VERY slow after downloading Lion
My Safari (which is the latest version) is now VERY slow after downloading Lion. It takes forever for anything to load, and some pages don't load at all anymore. Any way to fix this? It is very frustrating!
I've just made a change to try to keep the wifi from crashing and it also seems to give me a speed boost online.
Go into your System Preferences, choose Network, and then in that dialog box choose "Advanced..."
Once there, select the DNS tab.
Click the plus sign and add the following to your list of DNS servers:
8.8.8.8
It's Google's public DNS and seems to have fixed both the dropping and speed issues. -
IPhone 4s internet download speed super slow after iOS 7.1
I've been experiencing very slow download speed over wifi on my iPhone 4s and my iPad 2 after installing iOS 7.1 It's very frustrating because all other wireless enabled devices at home are working fine. My internet speed is 10Mbps download and my iPhone and iPad are only getting 0.01Mbps on average after iOS 7.1, which is really stupid. I've never experienced anything this frustrating with my iOS devices. Can anyone suggest a fix for this? I really need your help guys...
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
If this doesn't help, back up and restore via iTunes. If the problem continues, restore as a new device and test. If the problem is solved, there is some kind of corruption in your backup file or maybe it's one of your apps causing problems. If it continues, take it to an Apple Store for evaluation of a possible hardware problem. -
IPhone running super slow after upgrading to SO5
i took it to the apple store and they told me to back up everything and then try restoring. I did, and has made no difference. all apps run SUPER slow. safari is SUPER slow. so frustrated.
Did you try a Restore as New...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On... -
My MacBook Pro late 2011 has recently slowed to snails pace after successfully running Yosemite from a clean install for many months.
I always have Activity monitor running to keep an eye on memory and CPU. When the issue started, I noticed Kernel_task for the first time and its 0.5 to 1GB.
I have verified/repaired the disk and repaired permissions in Safe Mode. Also done SMC and PRAM resets.
CPU usage is usually 2% or less unless number crunching in Excel or watching videos.
I created a new user account, which is much faster in opening Safari and searching. There is no Kernel_task showing for the new user.
Cardo-updater is for a motorcycle bluetooth headset.
Xquartz is for GIMP.
Rogueamoeba is for Audio Hijack Pro.
These three have been in use since day 1 of Yosemite and before in Mavericks.
Etrecheck results
Oddities - I don't know what the disk info not mounted means. Not mounting the Recovery disk looks scary to me as uninformed.
Time machine disk too small - thought I was using a 1 TB drive !!
Problem description:
MBP late 2011 has become very slow after a few months after a Yosemite clean install. Kernel_task memory circa 1 GB. CPU activity is a few percent. Created a new user. Activity monitor does not show Kernel_task at all. Much faster as the new user. Permissions repaired in Safe mode. SMC and PRAM reset done. Short hardware test (option D on boot) - no problems. I have VirtualBox to run XP at times for some Win apps.
EtreCheck version: 2.1.8 (121)
Report generated 3 March 2015 10:30:47 am AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 278
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:40:45
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Yosemite HD (disk0s2) / : 499.25 GB (290.00 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.22) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.22) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.22) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.22) [Click for support]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[unknown] com.cardosystems.cardo-updater.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] com.rogueamoeba.instanton-agent.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
[not loaded] org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
Activity Monitor Application (/Applications/Utilities/Activity Monitor.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.3 [Click for support]
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 75 Check version
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
AdBlock
DuckDuckGo
Ghostery
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Yosemite HD: Disk size: 499.25 GB Disk used: 209.25 GB
Destinations:
Yosemite [Local]
Total size: 319.73 GB
Total number of backups: 10
Oldest backup: 2014-10-27 14:49:11 +0000
Last backup: 2015-02-28 00:39:26 +0000
Size of backup disk: Too small
Backup size 319.73 GB < (Disk used 209.25 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
1% cardo-updater
0% AppleSpell
0% loginwindow
0% fontd
Top Processes by Memory: ℹ️
155 MB Finder
103 MB WindowServer
77 MB CalendarAgent
77 MB Spotlight
73 MB com.apple.internetaccounts
Virtual Memory Information: ℹ️
187 MB Free RAM
1.55 GB Active RAM
1.38 GB Inactive RAM
1.10 GB Wired RAM
1.53 GB Page-ins
602 KB Page-outs
Diagnostics Information: ℹ️
Mar 3, 2015, 09:48:14 AM Self test - passedStart time: 14:09:53 03/03/15
Revision: 1273
Model Identifier: MacBookPro8,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 4:22
UID: 501
SerialATA
ST9500325ASG
CPU usage (%)
WindowServer (UID 0): 16.8
Login hook
/usr/bin/loginfix.sh
Firewall: On
System caches/logs
2.3 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-07 LegacyFileVaultMessageTracer crash
2015-02-12 Skype hang
2015-02-12 com.apple.AmbientDisplayAgent crash
2015-02-13 CalendarAgent crash
2015-02-14 LegacyFileVaultMessageTracer crash
2015-02-19 mdworker32 crash x16
2015-02-21 LegacyFileVaultMessageTracer crash
2015-02-26 iTunes crash
2015-02-26 mdworker32 crash x2
2015-02-27 mdworker32 crash x2
2015-02-28 LegacyFileVaultMessageTracer crash
HID errors: 41
Shutdown codes
-62 1
Kernel log
Mar 1 12:56:00 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 1 12:56:00 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 1 13:17:52 rtR0InitNative: warning! failed to resolve special kernel symbols
Mar 1 13:17:52 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 1 13:17:52 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 1 13:56:07 rtR0InitNative: warning! failed to resolve special kernel symbols
Mar 1 13:56:07 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 1 13:56:07 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 1 13:59:10 rtR0InitNative: warning! failed to resolve special kernel symbols
Mar 1 13:59:10 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 1 13:59:10 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 2 10:00:04 rtR0InitNative: warning! failed to resolve special kernel symbols
Mar 2 10:00:04 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 2 10:00:04 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 2 10:06:25 rtR0InitNative: warning! failed to resolve special kernel symbols
Mar 2 10:06:25 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 2 10:06:25 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 2 10:14:26 rtR0InitNative: warning! failed to resolve special kernel symbols
Mar 2 10:14:26 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 2 10:14:26 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 3 09:49:14 rtR0InitNative: warning! failed to resolve special kernel symbols
Mar 3 09:49:14 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Mar 3 09:49:14 VBoxDrv: Failed to open kernel symbols, rc=-102
Mar 3 12:44:10 Warning: IOSurface 00000066 modified by process com.apple.WebKit using the GPU while surface is write locked by process com.apple.WebKit
Mar 3 12:44:10 Warning: IOSurface 00000066 modified by process com.apple.WebKit using the GPU while surface is write locked by process com.apple.WebKit
System log
Mar 3 11:48:02 WindowServer: WSGetSurfaceInWindow : Invalid surface 828055384 for window 199
Mar 3 11:48:02 WindowServer: WSGetSurfaceInWindow : Invalid surface 828055384 for window 199
Mar 3 11:48:02 WindowServer: WSGetSurfaceInWindow : Invalid surface 828055384 for window 199
Mar 3 11:59:33 WindowServer: WSGetSurfaceInWindow : Invalid surface 829050891 for window 217
Mar 3 12:09:34 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Microsoft Excel" for over 1.00 seconds. Server has re-enabled them.
Mar 3 12:52:42 Mail: Set a breakpoint at CGSLogError to catch errors as they are logged.
Mar 3 12:52:42 Mail: Invalid window requested in CGSWindowThawBackdrops : 382
Mar 3 13:11:46 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
Mar 3 13:12:00 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "System Preferences" for over 1.00 seconds. Server has re-enabled them.
Mar 3 13:33:56 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Spotlight" for over 1.00 seconds. Server has re-enabled them.
Mar 3 13:47:48 com.apple.backupd: Error -35 while resolving alias to backup target
Mar 3 13:47:48 com.apple.backupd: Backup failed with error 18: The backup disk could not be found.
Mar 3 13:48:13 com.apple.backupd: Error -35 while resolving alias to backup target
Mar 3 13:48:13 com.apple.backupd: Backup failed with error 18: The backup disk could not be found.
Mar 3 13:51:26 WindowServer: WSGetSurfaceInWindow : Invalid surface 861039197 for window 342
Mar 3 13:51:26 WindowServer: WSGetSurfaceInWindow : Invalid surface 861039197 for window 342
Mar 3 13:51:26 WindowServer: WSGetSurfaceInWindow : Invalid surface 861039197 for window 342
Mar 3 13:54:47 WindowServer: WSGetSurfaceInWindow : Invalid surface 948771229 for window 189
Mar 3 13:54:50 sharingd: 13:54:50.400 : SDConnectionManager:: XPC connection invalidated
Mar 3 14:08:12 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
Mar 3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
Mar 3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
Mar 3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
Mar 3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
Mar 3 14:08:59 WindowServer: WSGetSurfaceInWindow : Invalid surface 948402577 for window 33
launchd log
Mar 1 09:06:51 com.apple.xpc.launchd.user.502.100005.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
Mar 1 09:06:52 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.297, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 09:36:40 com.apple.xpc.launchd.user.501.100019.Aqua: Could not import service from caller: caller = otherbsd.545, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 09:45:11 com.apple.xpc.launchd.user.502.100030.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
Mar 1 09:45:12 com.apple.xpc.launchd.user.502.100030.Aqua: Could not import service from caller: caller = otherbsd.709, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 09:49:06 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
Mar 1 09:53:20 com.apple.xpc.launchd.user.502.100006.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
Mar 1 09:53:20 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.296, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 09:56:28 com.apple.xpc.launchd.user.502.100006.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
Mar 1 09:56:29 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.297, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 12:56:18 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.296, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 13:18:13 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.296, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 13:59:40 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.297, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 14:07:01 com.apple.xpc.launchd.user.502.100020.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents, error = 2: No such file or directory
Mar 1 14:07:02 com.apple.xpc.launchd.user.502.100020.Aqua: Could not import service from caller: caller = otherbsd.477, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 1 14:07:12 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
Mar 1 14:40:11 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
Mar 1 14:40:12 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
Mar 1 14:48:04 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
Mar 1 14:48:05 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
Mar 1 16:28:29 com.apple.xpc.launchd.user.501.100035.Aqua: Could not import service from caller: caller = otherbsd.722, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 2 10:00:24 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.298, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 2 10:06:46 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.300, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 2 10:14:31 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.283, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 3 09:49:19 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.290, service = com.apple.photostream-agent, error = 119: Service is disabled
Console log
Feb 25 16:47:41 fontd: Failed to open read-only database, regenerating DB
Mar 2 10:00:23 fontd: Failed to open read-only database, regenerating DB
Loaded kernel extensions
org.virtualbox.kext.VBoxDrv (4.3.22)
org.virtualbox.kext.VBoxNetAdp (4.3.22)
org.virtualbox.kext.VBoxNetFlt (4.3.22)
org.virtualbox.kext.VBoxUSB (4.3.22)
Daemons loaded
cardo-updater
com.adobe.fpsaud
com.apple.AccountPolicyHelper
com.apple.CodeSigningHelper
com.apple.MobileFileIntegrity
com.apple.awdd
com.apple.backupd-auto
com.apple.cache_delete
com.apple.cfprefsd.xpc.daemon
com.apple.cmio.registerassistantservice
com.apple.coreduetd
com.apple.coresymbolicationd
com.apple.ctkd
com.apple.diagnosticd
com.apple.icloud.findmydeviced
com.apple.iconservices.iconservicesagent
com.apple.iconservices.iconservicesd
com.apple.ifdreader
com.apple.nehelper
com.apple.networkd_privileged
com.apple.nsurlsessiond_privileged
com.apple.nsurlstoraged
com.apple.sandboxd
com.apple.secinitd
com.apple.softwareupdated
com.apple.spindump
com.apple.systemadministration.writeconfig
com.apple.systemstatsd
com.apple.tccd.system
com.apple.watchdogd
com.apple.wdhelper
com.apple.xpc.smd
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.oracle.java.JavaUpdateHelper
com.rogueamoeba.instanton-agent
jp.co.canon.MasterInstaller
org.cups.cupsd
org.macosforge.xquartz.privileged_startx
Agents loaded
com.apple.CloudPhotosConfiguration
com.apple.DataDetectorsDynamicData
com.apple.InputMethodKit.UserDictionary
com.apple.MailServiceAgent
com.apple.cfprefsd.xpc.agent
com.apple.imdpersistence.IMDPersistenceAgent
com.apple.internetaccounts
com.apple.pluginkit.pkd
com.apple.sbd
com.apple.secd
com.apple.secinitd
com.apple.security.cloudkeychainproxy3
com.apple.tccd
User login items
Activity Monitor
- /Applications/Utilities/Activity Monitor.app
Safari extensions
AdBlock
- com.betafish.adblockforsafari
DuckDuckGo
- com.duckduckgo.safari
Ghostery
- com.betteradvertising.ghostery
Prefetching: Off
Widgets
iCal
iCloud errors
bird 62
cloudd 19
comapple.InputMethodKit.UserDictionary 4
CallHistorySyncHelper 4
Safari 1
Continuity errors
sharingd 7
Restricted files: 97
Lockfiles: 164
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
- mod date: Jan 31 13:16:59 2014
- checksum: 297651013
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>10</integer>
<key>Minute</key>
<integer>38</integer>
<key>Weekday</key>
<integer>2</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
- mod date: Nov 11 11:07:49 2013
- checksum: 2451978492
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.rogueamoeba.instanton-agent.plist
- mod date: Mar 25 19:00:08 2014
- checksum: 3487242040
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.rogueamoeba.instanton-agent</string>
<key>MachServices</key>
<dict>
<key>com.rogueamoeba.instanton-agent</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/Audio/Plug-Ins/HAL/InstantOn.driver/Contents/MacOS/instanton-a gent</string>
<key>ProgramArguments</key>
<array>
<string>instanton-agent</string>
</array>
<key>ThrottleInterval</key>
<integer>0</integer>
</dict>
</plist>
Contents of /Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
- mod date: Nov 25 22:39:19 2013
- checksum: 1894334785
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>jp.co.canon.MasterInstaller</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
<string>/var/run/jp.co.canon.MasterInstaller.socket</string>
<key>SockType</key>
<string>Stream</string>
</dict>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/org.virtualbox.startup.plist
- mod date: Mar 1 13:56:03 2015
- checksum: 3094394405
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key> <string>org.virtualbox.startup</string>
<key>Disabled</key> <false/>
<key>RunAtLoad</key> <true/>
<key>KeepAlive</key> <false/>
<key>LaunchOnlyOnce</key> <true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/VirtualBox/LaunchDaemons/VirtualBoxStartup.sh</string>
<string>restart</string>
</array>
</dict>
</plist>
Contents of /private/etc/ssh_config
- mod date: Jan 20 11:13:19 2013
- checksum: 1281775184
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
- mod date: Nov 11 12:53:23 2010
- checksum: 1213721873
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist
- mod date: Mar 1 13:56:19 2015
- checksum: 3654809970
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Bundles (new)
/Applications/VirtualBox.app
- org.virtualbox.app.VirtualBox
/Users/USER/Downloads/EtreCheck.app
- com.etresoft.EtreCheck
Installations
Office 2011 14.4.6 Update: 14/11/2014 3:29 pm
Adobe Flash Player: 12/11/2014 7:12 pm
Java 7 Update 71: 5/11/2014 1:23 pm
Canon ScanGear: 29/10/2014 5:15 pm
Adobe Flash Player: 26/10/2014 9:30 am
Elapsed time (sec): 823 -
After updating to Snow Leopard (to install Lion later), Safari and other aplications became super super slow and Preview is not working properly, I can't print anything that was opened with Preview. Already installed the Combo update, nothing happened, Safari still taking hours to load any site. I honestly regret downloading Snow Leopard, the older version worked so much better... Hope Lion is smarter than Snow Leopard...
This may help:
Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf -
Macbook pro 2008 super slow after fresh mavericks install
I install fresh snow leopard and mavericks after that, before i do this, my mac worked super fast and everithyng was great with snow leopard, after I intall mavericks the computer just got super slow, in every situation, opening apps or surfing the web is a pain in the... I hope apple fix this fast or I`ll be forced to go back to snow leopard again.
I have a macbook pro late 2008
core 2 duo 2.53hz
4gb ram 1067 mhz ddr3
512 nvidia geforce 9400m 256mb & dedicated geforce 9600m gt with 512mb
HD: TOSHIBA MQ01ABD100That is normal for a few hours. Spotlight is rebuilding its index of all connected drives. Disconnect any that are external and it will settle down soon. You can reconnect them when you go to sleep so that Spotlight can complete indexing.
-
Safari super slow after latest update to 10.9.1. Please help. Thanks.
My internet is deathly slow after doing the update. Any advice? Other programs seem fine. Thanks, Yvette
Hi yipck,
Thanks for visiting Apple Support Communities.
I recommend starting with the tips in this article if Safari is loading web pages slowly:
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/ts3408
Best,
Jeremy -
IPhone 4s SUPER slow after installing ios7 - what should I do?
I have an iPhone 4s and since I upgraded the ios to ios 7 it's very slow. all the apps are slow, everything is uploading slowly and it's just one big lag. I also have apps that now crash. How can I fix this?
Have you tried resetting your phone since the update? Press on the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your issues are resolved.
This is much easier than a restore, and is worth a shot (you will lose no data).
Cheers,
GB -
ITunes running super slow after latest update, today.
I just updated my software on iTunes and suddenly it's running super slooooooow!
It takes about 2 to 4 minutes to open.
New computer. Running Windows 7. It's not my computer. I promise.
iTunes was super fast until I just updated the software, this morning.
Plus, now it doesn't recognize my iPhone 4.
All of other programs are still running at lightening speed.
So, any suggestions? I'm expecting my new iPhone 4s, today and really don't want to have any issues going in.
This is very frustrating!
Thanks!Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Video upload from Iphone 5 to pc plays slow after few times in Quicktime player
I uploaded a video from my Iphone 5 to my pc and in the beginning it played well
But now if i try to play it plays really slow and chobby.. not good.
Can't find any solution.However, when I go to play them back in the latest Quicktime player the colours are wrong, mainly coming out purple.
On an XP system, the first thing I'd try would be the "Disable Direct3D acceleration in QuickTime" section of the following document. (iTunes uses QuickTime for video display, so the same basic troubleshooting step applies.) Restart the QuickTime Player prior to checking to see if the settings change has had any effect:
Troubleshooting iTunes for Windows XP and 2000 video playback performance issues -
My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?
My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
[System] com.hp.devicemonitor.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
AdobeResourceSynchronizer
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
Adblock Plus: Version: 1.7.4.1135
Ebay Shopping Assistant: Version: 1.1
Amazon Shopping Assistant: Version: 1.1
Slick Savings: Version: 1.0
Searchme: Version: 1.3
AdBlock: Version: 2.6.18
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
29% Safari
16% com.apple.WebKit.WebContent
5% PluginProcess
4% WindowServer
3% com.apple.WebKit.Networking
Top Processes by Memory:
289 MB Safari
131 MB com.apple.IconServicesAgent
82 MB com.apple.WebKit.WebContent
82 MB mds_stores
66 MB Finder
Virtual Memory Information:
721 MB Free RAM
1.62 GB Active RAM
1.05 GB Inactive RAM
636 MB Wired RAM
1.18 GB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
How can I run a report in a jsp page?
I've made reports using Reports 9i and i want execute these reports from a jsp page. When i run a report in a jsp page the following error : Any Advice? ======================== Internal Servlet Error: javax.servlet.ServletException: oracle/reports/R
-
Remove all tooltips from PDF Fom in Acrobat 9 Pro
I am trying to convert an Excel form into a PDF form. There are a couple of hundred fields in the form. By default, when I convert the excel file to a PDF form, Acrobat names all the fields automatically and this name is added to the tooltip. So when
-
This is the error message I get when I'm attempting to order the book I've created, "An error occured while uploading one of your files. Please check your network connection and click Retry to send your file." My network connection appears to be work
-
Why aren't some of my Virtual Copies labelled "Copy x"?
I have been trying to be more organized lately and updated my virtual copy smart collection to "Copy Name - Isn't Empty". I was surprised to see It was only showing 9 VC's. If I filter attributes on All Photos, I show 195 VC's. The "curl" shows up in
-
Is data transfer included in the 90-day tech support which comes with a new MacBook Air?
I would think so. A friend is buying a new MacBook Air, and needs to know if data transfer is included in the 90-day technical support offer from Apple. I'm pretty sure it is, but just would like to make sure I'm steering her in the right direction