Iphone 3G language pack/install language pack (DANISH/DANSK)
Hey! I somehow deleted or changed my language on the writing board... See... The language itself works, everything is on the language i want (DANISH LANGUAGE) but when i want to write somehing the language on the on the writing thing (DONT KNOW WHAT ITS NAMED. BASICLY ITS THE WHERE THE LETTER IS.) i is on english! Cause in Danish there is extra letters which is "Å" , "Ø" and "Æ".
So i want to ask where i can get a new language pack , or how to get a new, and then install it ??
Settings>General>Keyboard>Keyboards>Add>Add New Keyboard
Similar Messages
-
Windows 8.1 Install Language Packs Offline
I am looking for some kind of documentation or guide on creating a language pack package, and adding it to the task sequence for deploying Windows 8.1. I have the language pack Cab file, and a custom HTA for creating a variable that I know works, but
I cannot get the language pack to actually install. I read another post that suggested the location in the task sequence to put the "Install Language Packs offline" just before the "Setup Windows and ConfigMgr" but it is not working.
The task sequence does complete successfully, but the LP is not installed. I have a base Windows 8.1 Pro customized image. I am using SCCM 2012 R2 with MDT 2013.
The package only contains the Cab file, and doesn't have any programs associated with it.
Any help is appreciated.Hi Tyler,
Please have a look at the blog below that deploying Windows 7 language packs with SCCM OSD. It creates a custom XML file that knows to load the language pack.
http://sccmguy.com/2011/07/02/how-to-deploy-windows-7-language-packs-with-sccm-osd/
Note: Microsoft provides third-party contact information to help you find
technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce -
hello
i have this error when i try to install language pack
any idea pleaseit's OK , i have changed the alternate access mapping to http://locahost.
-
Language Pack Install issue?
I currently have a system with 1 single LP installed.
That system is patched with both March Upadte(kb2767999) and the December 2013 CU
I am looking to upgrade to SP1 and Sept 2014 CU.
When I tru to install SP1 for the LP, I get the message to Repair or Remove?
Is this expected?
How would you reccmomend they updates be installed?
1. Sp1
2. Sp1 LP
3. Spet CU
Do you install the binaries on all systems then run Config wizzard one at a time?(this seems like what I see most)
Do you install 1 update, run config, and then install the other and run config?
thanks
themushHi,
Sorry, I am a bit confused.
When a Service Pack is released for SharePoint you have to install Language service pack as well.
However, the CU for the SharePoint are containing also updates for the Language Packs.
You can Patch to SP1 directly from RTM. If you add a new server to a farm you just make sure that you have installed all needed binaries to the patch level of the Farm where you will join the server in.
Lets say you have RTM SP Server and LP you have to patch it to SP1 (both SP and LP) in order to join the server to a Farm that is with binaries on SP1 Level.
However you can install slipstreamed versions of the product. In this case the slipstreamed installation media will include some update level. -
Windows 7, ultimate or enterprise edition can we install language pack easily ?
in windows 7, ultimate or enterprise edition can we install language pack easily ?
Hi Sumit,
We could take use of Windows update or download from the following page:
http://windows.microsoft.com/en-HK/windows/language-packs#lptabs=win7
For install language packs using Windows update, please see:
Install language packs using Windows Update
Best regards
Michael Shao
TechNet Community Support -
Need to install language pack on reference machine before capturing image?
we have captured image via MDT 2013 using sysprep and capture method so how integrate or add language pack? need to install language pack on reference machine before capturing image?
You don't HAVE to install them on the reference machine. Here are some examples, both online and offline:
http://www.windows-noob.com/forums/index.php?/topic/3251-customising-windows-7-deployments-part-4/
http://scug.be/sccm/2013/01/04/how-to-install-windows-7-language-packs-online-during-osd-task-sequence-or-in-your-hybrid-base-image/
https://sccmentor.wordpress.com/2013/06/11/add-language-packs-to-an-offline-wim-file/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Language packs installed..but facing problem in translations
Hi All,
We are on ENH3 for Travel management.Language packs for FR,ES,PT and TR languages are installed.When i test the WD application for example for travel request by changing the application parameter sap-language from EN to any language its not working as it should be and showing up a mixture of DE and EN text.For DE it works perfectly.
I have checked some of the OTR alias and the text translations exists for all the languages.
Do we need to activate something for this.Any kind of pointers will be helpful.
Regards,
Indu
Edited by: Indu Garg on Apr 30, 2009 11:59 AMHi Folk,
You have to maintain local language descriptions in R/3. For example if you created expense types in english language, in portal if you log in German language, the drop down of expense type will show incorrect values. So you have to maintain local language description for each expense types. Pl let me know if you need any clarifications.
Good luck,
Thanks,
Nandagopal C -
hi,
when I install language pack on windows 7 ultimate wil also microsoft office 2010 change to the language I installed or office has its own language pack.
thanks
johan
h.davidHi,
Office 2010 has ite own langage pack.
You can check this post
http://www.howtogeek.com/howto/24433/how-to-add-other-languages-to-office-2010/
/ Yannick Plavonil
blog: Deploiement Windows
twitter: @yplavonil
facebook:
www.facebook.com/deploiementwindows -
Install service pack 2 in sharepoint medium form
Hi
i have a sharepoint medium form in production environment and i want to apply service pack 2
form has :
2 Application servers
2 Web front end servers
2 Index servers
1 Database server
Servers
Operating System
Configuration Database version
Services Running (check the attached file for details services running in all server)
1 Application Server
Windows server 2008 R2 Enterprise , Service pack 1
14.0.6029.1000
Central administration Service running in this server Only
For other services check the attached file
2<sup>nd</sup> Application Server
Windows server 2008 R2 Enterprise , Service pack 1
In two Web front end servers
Windows server 2008 R2 Enterprise , Service pack 1
Web applications deployed in these servers (these are load balanced servers)
Microsoft SharePoint Foundation Web Application running
Search service is running in these server
In two Index servers
Windows server 2008 R2 Enterprise , Service pack 1
Search service is running in these server
Database server
Windows server 2010 Data center
I want to take advise for from which server I will start install service pack 2
Or before applying service pack 2, Is I need to upgrade operating system if I update can I face any problems ?
adilLeaving function Command.this[string key]
03/27/2014 00:13:12 14 INF Leaving function Farm.TryIsJoinedToFarm
03/27/2014 00:13:12 14 INF Leaving function Farm.IsJoinedToFarm
03/27/2014 00:13:12 14 INF The parameter upgradesessionid is chosen, so returning the value as c81cccd6-5e02-4a35-b627-923fb6da03e9
03/27/2014 00:13:12 14 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF Setting the upgrade mode to inplace
03/27/2014 00:13:12 14 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF Creating security token service application for this farm ...
03/27/2014 00:13:12 14 INF Successfully created security token service application
03/27/2014 00:13:12 14 INF Creating service connection point for this farm ...
03/27/2014 00:13:13 14 WRN Failed to add the service connection point for this farm
03/27/2014 00:13:13 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 INF Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
03/27/2014 00:13:13 14 INF Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection
Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
03/27/2014 00:13:13 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container
exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=test,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
03/27/2014 00:13:15 14 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF Spawing off the upgrade job
03/27/2014 00:13:15 14 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF Entering function ServiceHelper.TryToStartService
03/27/2014 00:13:15 14 INF Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF Entering function ServiceHelper.Start
03/27/2014 00:13:15 14 INF Trying to start service SPAdminV4 and waiting 180 sec to do so
03/27/2014 00:13:15 14 INF service SPAdminV4 is Stopped, will try to start it
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:44 14 ERR An exception was encountered when trying to start service SPAdminV4
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language
English (United States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type
{0} was thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception
information: Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
03/27/2014 00:13:44 14 INF Leaving function ServiceHelper.Start
03/27/2014 00:13:44 14 ERR Failed to start the SPAdminV4 service.
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
03/27/2014 00:13:44 14 ERR Task upgrade has failed with an unknown exception
03/27/2014 00:13:44 14 ERR Exception: System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception:
The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function get CommandCollec
adil -
Before installing language pack everything works with legal S/N.
Adobe - Photoshop : For Windows : Adobe Photoshop CS4 11.0.1 update - multiple languages
PawełBefore installing language pack everything works with legal S/N.
Adobe - Photoshop : For Windows : Adobe Photoshop CS4 11.0.1 update - multiple languages
Paweł -
Maintainance tasks for language package installed
Hi All,
May I ask inputs regarding installing language package. Basically, below are my questions.
- Are there any maintainance activities required following installation of a language package in the system?
- Are there any annual support packs for language packages?
- Say our ECC is EHP5 and we installed new language in our system, then we upgraded the same system to EHP6. Are there any activities that needs to be performed because of the upgrade even if the language is already installed in the system prior to the upgrade?
- Do difference in language installed in the systems affect the copied xml file during upgrade? Meaning, say we have dev and QA ecc system. We created stack file for dev for the ehp6 upgrade. Using that stack xml, upgrade dev system. Then a decision is made to install new language in the system. Thus it is installed in upgrade dev, and not upgraded QA. Now, we copy the stack xml file use in dev to be converted for QA. Would there impact on the upgrade process?
I would appreciate your inputs on the queries. Thanks.
Regards,
PhilipHi Philip,
- It depends on what you did exactly during this installation. Could you please list the steps taken?
- There are no annual support packs. Language packages are shipped with every release of a new Support Package, with updates and corrections of the existing content (if any).
- With SPs as with EhPs, you will need to reinstall the language files for your system. It is hopefully rather quick as a follow-up step (not saying that the initial language deployment is tedious and hard work, but... Well, yes, it is) if you have not performed any translation activities in your installation.
- I don't think so since languages do not seem to be included in the stack (which would actually be counter-productive, dangerous and a dozen unnamable negative linguistic adjectives).
Hope that helps!
Sylvain -
How do I change the language in Photoshop CC from danish to english?
How do I change the language in Photoshop CC from danish to english? I'm not used to work in my motherlanguage in PS - but when I downloaded the app, it was in danish - I didn't have a choice to choose language. So what do I do?
I have checked creative cloud for options where to choose languages, but there doesn't seem to be any in the dansih version..?KirstenAdler please see Adjust the install language | Creative Cloud applications | CCM - http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html which discusses how to adjust the language of your Photoshop CC installation.
-
Language switched from English to Danish
When my wife first attached her iPhone to her Mac (running iTunes 9), the language switched from English to Danish. After syncing, she reset the language back to English. But why? A known problem?
I did the same thing with my iPhone and Mac, and did not see anything unusual.I believe this is a very unusual occurrence. It is a computer after all and computers have 'glitches' every once in a while - chalk it up to that.
BTW, I used to live in Bucks County... Riegelsville and Perkasie to be exact. We moved from Perkasie a couple years ago. -
How do I install language package in my SAP environment?
HI
After installation of sap netweaver server I need to activate a new Europe language as default language ( DA) package?.
I got the language pack on a DVD.
I did :
1. /nSE38
execute Program = RSCPINST -> click execute icon
under Enter Languages -> add Denish (DA)
click SIMULATE button at top bar
simulate OK then I click ACTIVATE button on top bar.
2. /nSMLT
Select from menu LANGUAGE -> CLASSIFY
Language = Denish
Supplementation Language = English
click SAVE disk icon
highlight Denish then select LANGUAGE -> IMPORT PACKAGE
Language = Denish
Path = c:\language\DATA_UNITS\DA
UnderDATA_UNITS directory I have 2 file
- DANW7011.PAT
- PRODLABEL
Which one should I use?
The installation looking for a u201C.car or .saru201D file.
But there is nou201D .car or .saru201D file dere. Is it some help there?
ThanksHi,
Can you please copy the .PAT files to <DIR_TRANS>/EPS/in directory and then try again?
Also, let SMLT search this directory. A .SAR file is basically like an archive which has 2 files inside it: an .ATT file and a .PAT file. .PAT file contains the actual patch that is imported.
Try and let me know.
Thanks,
Shitij -
Change language on installed PS CC...
Hi
I have just installed PS CC among other apps on my laptop. My desktop PC's I have installed with english windows, but my laptop came preinstalled with danish windows.
The issue is now that PS automatically installed in danish, and to be honest, I want it in english as on my desktop.
How can I change it? Inside the settings menu there is a drop down menu called "user interface language" (or something like that), but the only language I can choose, is danish?!
Thanks in advance.
UlfThanks a lot Curt - found it
I uninstalled PS
Changes the language inside the CC controlpanel
Reinstalled PS
PS is now english.
Ulf
Message was edited by: UlfLaursen
Maybe you are looking for
-
Please help...I have one than more IDs. I cant remember the password or the email account that I purchased most of my music under. My computer is authorized under my current ID but not my old one. When I try to enter the answers to my security questi
-
Query working fine in toad but not in forms 6i
i have following coding on when button press triger declare CURSOR C1(year number,month number) IS SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp FROM select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP
-
Can anyone help me with program
public class Cabinet //class variables private static char knob = 'k' ; private static char pull = 'p'; private static char base = 'b'; private static char wall = 'w' ; // instance variables private double width; private double height; private int do
-
How to access same ejb from different applications
Hi I have two applications (.ear). Each application has 4 EJBs. These EJBs are same in both applications including their names. JNDI names are also same in each application. in detail ApplicationA (appA.ear) contains web1.war ejb1.jar ejb2.jar ejb3.j
-
I cannot view anything in 'My Pictures'
'Windows Picture and Fax Viewer' seems to have deleted itself meaning i cannot view anything in 'My Pictures'. Have tried system restore a few times with no luck and cannot find any way to reinstall it from the microsoft website. Any ideas how i can