IPhone 3G not appearing in either iPhoto or iTunes when plugged in via USB

No longer getting my iPhone 3G to appear as a device in either iTunes or iPhoto (my wife's iPhone 3G either) when plugged in to my powerbook's USB port or the second USB port on my Apple keyboard. Also the iPhone is no longer charging from these USB ports.
Tried different USB cables.
Wife's iPhone on iPhone 3.0. Mine on 3.1.
Then tried using same USB cables to connect via her old flat panel iMac. it worked!
Then I tried plugging the iPhone USB cable into the other Powerbook USB port normally used by my keyboard.
Nothing. Including no charging.
Looks like a problem with the USB connections on the Powerbook with the circuitry that connects to an iPhone. The keyboard works fine in either of the USB ports. And the USB ports on my 20" screen that connect to at least some of my external drives also seem to be working. They appear on my desktop.
Is the internal circuitry on the Powerbook USB ports such that some external devices can remain supported while other USB devices are not recognized?
Steve

Have you tried assigning your iPod a different drive letter? See these instructions below:
Log off of any other users on your computer (and disconnect any iPods that are currently connected to your computer, as well)
Then, put your iPod into Disk Mode, then follow these steps:
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod drive letter / Changing drive letter
If your iPod isn't recognize to assign it a different letter, or the above steps still don't work, then try disconnecting all other USB devices from your computer (other than your mouse and keyboard), and see if you can re-assign your iPod's drive letter works.
I hope that helps you.
-Kylene
If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

Similar Messages

Ipod Nano 7th Gen Not Being Recognized By Laptop Or Ipod When Plugged In Via Usb

The title explains it but when i plug my new ipod in (7th Gen Nano) to my laptop via usb it is not charging or showing up at all

I'm trying to put songs on it

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can.

My phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

my phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

If the device isn't be recognized by itunes, try following the troubleshooting steps in one of these articles
http://support.apple.com/kb/TS1538 for windows
http://support.apple.com/kb/TS1591 for mac

HT5824 photos taken on my Iphone are not appearing in ICloud/IPhoto. ( to my knowledge, the settings are set for "share/upload"

Photos taken on my Iphone do not appear in ICloud. I've checked the settings but am unable to determine
what, if anything, I need to do inorder to syn the photos.
Technically, I need to review the settings on my Iphone and ICloud that will enable a seamless transfer of photos.
Additionally, I need to review the computer (microsoft)setting that enable a sync of photos with ICloud.

Everything is fine, because there is no web application for photos at the moment. These are the options to view your Photo Stream:
-On your iPhone, iPad or iPod touch, your photos will appear in the Photos app in the Photo Stream album.
-On your Mac, they appear in the Photo Stream view in iPhoto or Aperture.
-On a PC, your photos download to the Photo Stream download folder. By default, this folder is located at C:\Users\Apple\Pictures\Photo Stream\My Photo Stream. You can change this location by visiting Photo Stream Options in the iCloud Control Panel for Windows.
-On Apple TV, your photos will appear in the Photo Stream view under Internet in the main Apple TV menu after you sign in with your iCloud account.

Iphone does not appear in device list in itunes?

Cant sync my iphone

I have two iPhones (iOS 4.3.5 (8L1) & 4.3.4 (8K2)) that do not appear in iTunes. For both phones, I have followed all steps at
http://www.apple.com/support/iphone/assistant/itunes/
except re-installing iTunes which seems like a ridiculous thing to do. I have updated my iMac to Lion (Mac OS X 10.7) and have the latest iTunes 10.4 (80). Also, my two iPhones do not appear in iPhoto 9.1.5 (615) either.
Since I rebooted my iMac I'd assume that is similar to your advice to stop and restart services.
Any further suggestions?

Ipod not recognized by PC running Windows 7 when plugged in to USB Port

PC does not recognize IPOD when plugged in to USB port.

What have you tried for troubleshooting so far? Have you seen this article?
http://support.apple.com/kb/ts1369
Be sure to try each and every troubleshooting suggestion offered.
B-rock

30 gig iPod not found in My Computer or iTunes when plugged in

I just got this iPod the other day for a birthday present from my father. I immediately put some music and video on it and all was fine. I've had it plugged in a few times and it worked perfectly fine again. Last night I tried to plug it in again to put stuff on it and all that happened was the beep you get to let you know that something has been put in the USB. It is not shown in My Computer or iTunes, and there is no USB error balloon popping up. My iPod screen still says do not disconnect when plugged in and it still plays normally when unplugged. I do not know what to do to remedy this problem and I have tried many things and looked up and down the support section of the site, but to no avail.
Emachines Windows XP

Have you tried assigning your iPod a different drive letter? See these instructions below:
Log off of any other users on your computer (and disconnect any iPods that are currently connected to your computer, as well)
Then, put your iPod into Disk Mode, then follow these steps:
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod drive letter / Changing drive letter
If your iPod isn't recognize to assign it a different letter, or the above steps still don't work, then try disconnecting all other USB devices from your computer (other than your mouse and keyboard), and see if you can re-assign your iPod's drive letter works.
I hope that helps you.
-Kylene
If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

My ipad does not appear as a device in itunes when connected (1st time trying to sync). all other apple devices are fine and I have the latest itunes version.

I have a new ipad2 for xmas . I have tried to sync the device to itunes and it is not being seen. I have the latest version of itunes, updated last night, and have several other devices that are seen fine (iphone/ipods).
When I connect the usb direct to the mac iphoto starts but then that is it - itunes will not recognise the device......
I have gone thourgh the suggested support help on the apple website and came to the last point - review community ... so here I am!

What you provided is not everything mentioned.
Your Mac is running 10.5.8 or later and iTunes 10?
You are connecting the iPad direct to a USB port on your Mac and you have tried every port?
You have reinstalled the Apple Mobile Device Service?
If your Mac is running Snow Leopard - 10.6, have you checked this link?
http://support.apple.com/kb/TS3540

My iPhone will not charge and will only turn on when plugged into adapter.

I have tried to reset and nothing. It turns off if I unplug it and will only turn on when plugged in. The charge has not moved above 19% even though I let it charge for 3 hours while I was out. What do I do?

http://support.apple.com/kb/TS2802

How to make external devices (like iPods, etc.) NOT mount as connected drives when plugged in via USB to a Mac?

If I plug my iPod (or a thumb drive or whatever) to my Mac's USB port, the device appears as a icon representing a connected drive on my Mac's Desktop.
This is normal, expected behavior.
HOWEVER, in some cases, I'd prefer that the device not "mount" as a connected external drive.
With thumb drives or external USB drive, of course, I want them to "mount" so I can transfer files on or off them -- that would be the only possible reason to connect an external drive like that.
But with other Apple devices like iPods or iPhones, there are TWO possible reasons to connect them to a Mac: either to "sync" them or transfer files on/off them; OR, to simply recharge the device's battery. (Or, both sync and recharging functions at once.)
For those people who use their Apple devices in ways that require transferring files (i.e. most people), then having the device "mount" as a connected device is a desirable behavior.
But in my circumstance (and I bet there are a lot of people in a similar circumstance), I have no need or desire to transfer any data to or from my device every time I plug it into my Mac: I'm plugging it in SOLELY to recharge the device's battery.
Specifically, in my case, I have a 6th-gen iPod Nano, and I use it exclusively as an FM radio and a pedometer. I don't have any mp3s or songs or any other external files loaded on it, nor do I plan to add any in the future.
The only reason I ever plug it into my Mac is so that I can recharge the iPod's battery.
But the "problem," which is a minor one I admit but a problem nonetheless, is that every time I connect the iPod to the Mac, the iPod appears as a "connected drive" icon on my Mac's desktop. Which means that I'm not supposed to just unplug the iPod when I'm done -- first, I have to find its icon on the Mac Desktop, and then drag the icon to the Trash, to "unmount" it -- and only then can I freely unplug the iPod without getting an error message telling me that I shouldn't just disconnect connected drives without first properly unmounting them.
This would be bothersome enough if I only had to do it once per connection, but in the case of the iPod Nano, there's no way to tell how recharged it is while it is in the act of recharging, so that to see if I'm "done," I have to unplug it, check the battery status, and if it's not fully charged, re-plug it back in. So that each time I recharge it, I often have to unmount the drive several times, depending on how impatient I am.
There has to be a way to prevent the mounting of the drives of devices that one is connecting simply for the purpose of recharging. But how?
Strangely, I also have an old iPhone, and when I plug that in for recharging in the same way, it DOESN'T appear as a connected drive on the Desktop. I'm not sure how I managed to do this, but long ago I must have changed some setting or preference for this to happen. And by now I've forgotten what I did.
I'd prefer that I could change the "mount/don't-mount" setting on a device-by-device basis -- i.e. make it such that this particular iPod doesn't load, but perhaps a different iPod would load -- but if that's not possible, then is there a way to stop ALL iPods and iPhones from loading as connected drives when plugged in?
(I'm not talking about appearing as connected drives within iTunes -- I'm talking about appearing as an icon on the Desktop in the Finder.)
And please don't tell me to just buy a wall charger! I prefer to recharge off my computer if possible, using the charging cord that came with the iPod.
I presume there's some simple setting to toggle this on or off, but I haven't yet found it. Any clues would be appreciated. Thanks!

Well, I already know about that Finder Preferences option, but that is not what I'm looking for. Why not? Because I still need CDs and DVDs to appear on the Desktop and mount properly! If I uncheck the "CDs, DVDs and iPods" option, then I lose the ability to access CDs and DVDs, which creates a whole new problem for me. What I want is to not mount iPods only -- actually, what I really want is to not mount this particular iPod -- but if that level of specificity is not possible, then I want to exclude just iPods from mounting, without also condemning CDs and DVDs (or whatever) to invisibility.
Also, I was confused by the way the Preference is worded: It says "Show these items on the Desktop," with a series of options to check. But this phraseology seems to mean that the unchecked items will still "mount," they simply won't appear as Desktop icons. One would still have to "Eject" them using a menu command, rather than dragging the icon to the Trash -- right? Or am I mistaken, and is the Preference Pane simply badly worded, and when they say "Show these items on the Desktop," what they really mean is "mount these external devices as connected drives." So that if a category is unchecked, then they won't load as external drives at all?
But if so, then what purpose could possibly be served by inserting a CD or DVD that is not recognized by the computer? And if it isn't recognized, then it would seem that there would be no way to ever Eject the CD or DVD disk. Right?
Thus, if I uncheck that Finder Preference box you suggest, one of two outcomes will result:
-- Either CD, DVDs and iPods are still mounted, they just won't appear as icons on the Desktop; but they would still need to be Ejected via a menu command, which doesn't solve my problem.
-- Or, CDs, DVDs and iPods are not mounted or recognized by the computer at all, which means that if I insert a disk into the disk drive, it will get stuck there forever, since there's no way to Eject it, since the OS doesn't recognize that it's even there. Which is thereby a new problem.
Either way, I'd have a problem! Or...? Clarification, anyone?

IPad 3 not visible to iTunes unless plugged in via USB...

I am not sure when it started but my iPad 3 does not show up in the devices section of
iTunes and wifi sync will not start when initiated from the iPad 3. It just keeps searching.
Wifi *is* on and working fine.
My iPhone 4s does not have this problem.
If I plug the USB cable into the iPad3 then the iPad 3 does show up in the devices
section of iTunes and will sync in either direction.
Does anyone have a clue to the nature of this problem?
Thanks
Jerry

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

IPhone4 not recognized in iTunes, nor in My Computer when plugged in via USB

The title says it all. Plug my iPhone4 into my laptop's USB port, does not appear in my computer, nor in iTunes. Vista 64 bit OS.

Try these:
http://www.apple.com/support/iphone/assistant/itunes/

Touch Screen not working when plugged in via usb to laptop

I am hoping someone can help me figure out what to do because I have run out of ideas... When I plug the phone into my laptop via the USB cable provided with the phone (2006 Dell 1710 Inspiron, Windows Vista) the touch screen does not work. The phone is functioning but I just can't use the touch screen to do anything, more specifically, I want to connect as a mass storage device so I can transfer files, music, pictures, etc.
I have downloaded the drives, installed and reinstalled the drivers, soft rest, used all 5 USB ports on the laptop and made sure the ports were up to date for drivers and software on the laptop. Still the screen won't work when plugged in.
My next step was to try it on a different computer so I used an HP desktop running Windows 7. Downloaded the drivers when prompted and low and behold the screen worked just fine when plugged in. It also works when plugged into my computer at work.
Considering the phone works fine on another computer I am guessing it might be the USB ports on my laptop or the software associated with it.
If anyone can help I would greatly appreciate it. Thank you!

I would definitely agree with you, Funkytown. If we know the phone works properly with two other computers and you've run through all the troubleshooting (awesome job!), then we can determine there is something with the computer that is causing the issue.
Thank you!

Iphone seems to take a long time to charge when plugged in to USB

Hi MyIphone seems to take a long time to charge when plugged in to USB. Is this normal? Less power coming from the Laptop than wall plug?

Wow.. this completely amazes me. USB is 5v. Some computers (especially laptops) will shut off power to USB devices when the computer enters power saving mode. Very few will lower the power (since this could actually damage a device). I have noticed no difference in charge time between USB and the wall plug (I use the wall plug mostly when I travel, and USB at home). The only difference I can see is the wall wart puts out slightly more amperage then a USB port.

IPhone 3G not appearing in either iPhoto or iTunes when plugged in via USB

Similar Messages

Maybe you are looking for