IPhone 3G physical phone size is smaller than others?

I have noticed that my iPhone 3G (16gb) is actually shorter (in size) than my wife's? I use the Inspiretech case and have noticed that my phone actually shifts around a little bit but when I put my wife's phone in there, it holds the phone correctly and doesn't shift. I also experienced this with my first case which was a DLO-Jam Jacket where the phone would slide down the jelly like case a little bit. My wife's phone did not do this in the Jam Jacket either. Has anyone experienced this before? I have modified my latest case by stuffing a couple pieces of folded up paper in it to make up the extra space. Is this something I should worry about? Will this forever be a neusance?

This is my case (http://www.inspiretech.com/p-377-iphone-3g-full-protector-case-blue.aspx) and it's for the 3G and it fits my wife's 3G snuggly. I'm thinking my phone is a few millimeters shorter. Almost a manufacturing defect that will just be a neusance the rest of the phone's life

Similar Messages

  • ORA-13044: the specified tile size is smaller than the tolerance

    Hi,
    I get the oracle error ORA-13044: the specified tile size is smaller than the tolerance when I do the following point cloud clip:
    8 sdo_geometry(2003,29903, null,
    9 mdsys.sdo_elem_info_array(1,1003,3),
    10 mdsys.sdo_ordinate_array(316504,316510,234084,234090)),
    However the bounds of my point cloud are
    316500 to 316511 and 234080 to 234092 and my tolerance during point cloud creation is set to 0.000015 (I have alterated this value before to make it smaller but nothing seems fit).
    Where do I set the "tile size"?
    The set consists of 100 points and blk_capacity is set to 50.
    Any help is really greatly appreciated.
    Cheers,
    F.

    Hi BKazar,
    thanks for responding.
    Yes, I tried out all sorts of things and swapped the numbers to see if that would fix the issue. It did not.
    I have found out now though what the issue was. When I loaded the data file into Oracle, the guy who gave me the file said that the first column is the longitude, but it wasn't. After switching sdo_point.x and y the error disappeard.
    I suppose the sdo_srid was expecting a different range and got confused because my long and lat were swapped.
    Cheers,
    F.

  • VAULT size is smaller than the LIBRARY

    my vault size is smaller than the aperture library.  is it saving everything?  it seems like the two should be the same size or at least close to the same size.  i regularly update my vault so that it is current with the library.  VAULT = 168 GB | LIBRARY = 262 GB

    what is the consequence if i totally turn previews off?
    The major consequence is that you will not be able to share images from your library through the media browser. So if you want to email an image for example or add an image to a document you will need to export the image first rather then be able to get the preview from the library.
    Also if you have referenced originals and the originals go off-line nothing will appear in the library. If you had previews for those images you would still see them and be able to do tasks like rate them.
    Finally some operations might appear slower as you won;t see anything on the scree until the image you are looking at is rendered. With previews while Aperture is rendering the image in the background it will display the preview.
    It is possible to selectively maintain previews for some projects and not for others. This might be a comprise position between having previews for al images and having no previews at all.

  • Delete every file which size is smaller than 10kb

    Hello,
    how can I delete every file which size is smaller than 10 kb?? I'd thought that i can do that with the methode "length()"... but nothing happens.
    File tryToDelete = new File( ".");
    String [] listing = tryToDelete.list();
    for (int z = 0; z < listing.length; z ++)
        if ((listing[z].length()) < 10000)      //does anyone know what is wrong here??
             File away = new File(listing[z]);
             away.delete();
    }thanks for helping ...

    ups... you are right... but I still have an problem...
    I want to delete only the files which are smaller than 10 kb and starting with the "http".
    But it doesn't work, when I run the code:
    File tryToDelete = new File( ".");
    String [] listing = tryToDelete.list();
    for (int z = 0; z < listing.length; z ++)
        if (listing[z].startsWith("http");
             File away = new File(listing[z]);
             if ((away.length()) < 10000)
             System.out.println(away);
    }then he prints me out ALL files which size is smalletr than 10000. But I only want to have the files which starts with "http".
    What is my error??

  • Why is the font size for hot links smaller than other text on some web pages

    On some web sites, the hotlinked words and some words in colour appear in a smaller font than they were designed to be.
    When the web master changed the colour to black on one title at the website noted below, it appeared in the correct size.

    That site is designed that way: font-size: x-small;
    <pre><nowiki> A:link { font-family: Verdana,Tahoma,Arial,Helvetica,Sans-serif,sans-serif; font-size: x-small; color: rgb(0,51,204); font-weight: normal; font-style: normal;}</nowiki></pre>

  • In smartform folder's size appears smaller than main window

    Hi all,
    I used folder and table in main window. table takes the width of main window but folder does not takes. in print preview folder's size appears small then table. please suggest how to increase the size of folder.
    regards
    shahid

    Hi,
    Try this way , First create a window inside the main window then create your folder node. Generally if you are creating a node inside the node it takes the default of main window.
    Thnaks,
    Abhijit

  • Photoshop CC displays images 25% smaller than other apps?

    Why is Photoshop CC displaying images 25% smaller than my other applications? If I open a 72 ppi square pixel aspect image in Photoshop, I have to zoom to 125% for it to be the same size on screen as in my browser or any other image viewer. Photoshop reads the correct pixel sizes, but displays it smaller.
    I design and build websites and have been using Photoshop for over 15 years and haven't noticed this until CC. If I save the images and build out the site, or even just drag the image into a browser and then overlay that browser window above the Photoshop window to see both images side by side, I can clearly see a 25% difference in size.
    If I zoom in Photoshop to 125%, then the sizes match. So, the problem is when designing a website, everything looks smaller in photoshop. Then when I build it out, everything is way too big.
    My browsers are definitely at 100% zoom and I can open the image in any other image viewer at 100% and the affect is the same.
    Is there a setting that can be adjusted in Photoshop to correct this?

    I also have the same issue. I can reporoduce exactly what Roger2012Jr mentions above.
    I have Photoshop CC, Windows 8.1, screen resolution 1920 x 1080. Files look really sharp in Photoshop, but when the file is exported (for web or not) the image is blurry and about 125% the size it was in Photoshop. Also, when I bring an image from the web, tried with a random image it still looks perfectly sharp in Photoshop, just about 80% actual size. That same image exported still looks perfect in the browser, same as it was originally.
    So starting from scratch with an image, there's no way to guarantee the quality when exported and quality looks really blurry. I can't use the program with any sense of confidence.
    Can someone from Adobe shed any light on this?

  • Why is the Log Area size much smaller than the log volume

    I have been following up on an Early Watch report that has been generated for our production SCM 5.0 system running liveCache 7.6.02 Build 14.  The alert says "The LOG volumes size in your system is too small. Recommendation: Configure LOG Volumes to at least 2 GB".  There are two interesting things about this.
    1) I have spent the last couple of days reading all the OSS Notes, and MaxDB documentation I could find, and this does not seem to be documented as a recommendation anywhere.  Does this seem like a realistic recommendation without taking into account the level of change actifity?
    2)  There is a single log volume allocated with size 2,097,160 KB.  In production LC10 and DBMGUI report this to be correct size under volume details, but only list the total log area size as 1,706,328 (81% of the volume size).  We have a non-production environment with exactly the same size log volume, but it reports that the log area size is 2,032,008 KB (97% of the volume).  What leads to these different amounts of wasted space, and is there any way of getting the database to start using it?
    Thanks,
    Mark

    Hi Natalia,
    I did read 869267, several times.  It does not answer my questions which is why I posted here.
    DBMGUI version = 7.6.00.25
    DBMCLI commands for PL1 (Production)
    > xinstinfo PL1
    IndepData           : /sapdb/data
    IndepPrograms       : /sapdb/programs
    InstallationPath    : /sapdb/PL1/db
    Kernelversion       : KERNEL    7.6.02   BUILD 014-123-152-175
    Rundirectory        : /sapdb/data/wrk/PL1
    > dbmcli -d PL1 -u control,control
    dbmcli on PL1>db_state
    OK
    State
    ONLINE
    dbmcli on PL1>info log
    OK
    END    
    Name                            | Value
    Log Mirrored                    = NO
    Log Writing                     = ON
    Log Automatic Overwrite         = OFF
    Max. Size (KB)                  = 1706328
    Backup Segment Size (KB)        = 699048
    Used Size (KB)                  = 104640
    Used Size (%)                   = 6
    Not Saved (KB)                  = 104640
    Not Saved (%)                   = 6
    Log Since Last Data Backup (KB) = 0
    Savepoints                      = 5210
    Checkpoints                     = 0
    Physical Reads                  = 2469115
    Physical Writes                 = 15655616
    Queue Size (KB)                 = 48000
    Queue Overflows                 = 646
    Group Commits                   = 98205
    Waits for Logwriter             = 10957511
    Max. Waits                      = 10
    Average Waits                   = 0
    OMS Log Used Pages              = 0
    OMS Min. Free Pages             = 0
    dbmcli on PL1>param_getvolsall
    OK
    LOG_MIRRORED                     NO
    MAXLOGVOLUMES                    2
    MAXDATAVOLUMES                   14
    LOG_VOLUME_NAME_001              262145     F  /sapdb/PL1/saplog/DISKL001
    DATA_VOLUME_NAME_0001            524289     F  /sapdb/PL1/sapdata/DISKD0001
    DATA_VOLUME_NAME_0002            524289     F  /sapdb/PL1/sapdata/DISKD0002
    DATA_VOLUME_NAME_0003            524289     F  /sapdb/PL1/sapdata/DISKD0003
    DATA_VOLUME_NAME_0004            524289     F  /sapdb/PL1/sapdata/DISKD0004
    DATA_VOLUME_NAME_0005            524289     F  /sapdb/PL1/sapdata/DISKD0005
    DATA_VOLUME_NAME_0006            524289     F  /sapdb/PL1/sapdata/DISKD0006
    DATA_VOLUME_NAME_0007            524289     F  /sapdb/PL1/sapdata/DISKD0007
    DATA_VOLUME_NAME_0008            524289     F  /sapdb/PL1/sapdata/DISKD0008
    DATA_VOLUME_NAME_0009            1048577    F  /sapdb/PL1/sapdata/DISKD0009
    DATA_VOLUME_NAME_0010            1048577    F  /sapdb/PL1/sapdata/DISKD0010
    DATA_VOLUME_NAME_0011            1048577    F  /sapdb/PL1/sapdata/DISKD0011
    DATA_VOLUME_NAME_0012            1048577    F  /sapdb/PL1/sapdata/DISKD0012
    dbmcli on PL1>param_directget MAXCPU
    OK
    MAXCPU  12
    dbmcli on PL1>param_directget MAX_LOG_QUEUE_COUNT
    OK
    MAX_LOG_QUEUE_COUNT     0
    dbmcli on PL1>param_directget LOG_IO_QUEUE
    OK
    LOG_IO_QUEUE    6000
    > xinstinfo SL1
    IndepData           : /sapdb/data
    IndepPrograms       : /sapdb/programs
    InstallationPath    : /sapdb/SL1/db
    Kernelversion       : KERNEL    7.6.02   BUILD 014-123-152-175
    Rundirectory        : /sapdb/data/wrk/SL1
    dbmcli on SL1>db_state
    OK
    State
    ONLINE
    dbmcli on SL1>info log
    OK
    END    
    Name                            | Value
    Log Mirrored                    = NO
    Log Writing                     = ON
    Log Automatic Overwrite         = OFF
    Max. Size (KB)                  = 2032008
    Backup Segment Size (KB)        = 699048
    Used Size (KB)                  = 3824
    Used Size (%)                   = 0
    Not Saved (KB)                  = 3824
    Not Saved (%)                   = 0
    Log Since Last Data Backup (KB) = 0
    Savepoints                      = 1256
    Checkpoints                     = 0
    Physical Reads                  = 2178269
    Physical Writes                 = 4969914
    Queue Size (KB)                 = 16000
    Queue Overflows                 = 21201
    Group Commits                   = 643
    Waits for Logwriter             = 751336
    Max. Waits                      = 4
    Average Waits                   = 0
    OMS Log Used Pages              = 0
    OMS Min. Free Pages             = 0
    dbmcli on SL1>param_getvolsall
    OK
    LOG_MIRRORED                     NO
    MAXLOGVOLUMES                    2
    MAXDATAVOLUMES                   10
    LOG_VOLUME_NAME_001              262145     F  /sapdb/SL1/saplog/DISKL001
    DATA_VOLUME_NAME_0001            262145     F  /sapdb/SL1/sapdata1/DISKD0001
    DATA_VOLUME_NAME_0002            262145     F  /sapdb/SL1/sapdata2/DISKD0002
    DATA_VOLUME_NAME_0003            1048577    F  /sapdb/SL1/sapdata3/DISKD0003
    DATA_VOLUME_NAME_0004            1048577    F  /sapdb/SL1/sapdata4/DISKD0004
    DATA_VOLUME_NAME_0005            783501     F  /sapdb/SL1/sapdata1/DISKD0005
    DATA_VOLUME_NAME_0006            783501     F  /sapdb/SL1/sapdata2/DISKD0006
    dbmcli on SL1>param_directget MAXCPU
    OK
    MAXCPU  4
    dbmcli on SL1>param_directget MAX_LOG_QUEUE_COUNT
    OK
    MAX_LOG_QUEUE_COUNT     0
    dbmcli on SL1>param_directget LOG_IO_QUEUE
    OK
    LOG_IO_QUEUE    2000
    Thanks for the explaination of the reserved space for the Log Queue pages.  This does explain why there is the difference between the two.  I think we probably have our log segment size too large.  As you can see we do get occasional log queue overflows.  Do you suggest we increase the size of our log IO queue higher, and allocate more log volume space to compensate?
    select * from SYSINFO.LOGSTATISTICS (on PL1)
    1706328;334176;19;334176;19;1879;20305192;64109066;7806480;182151514;12;48000
    DBMGUI Log Area Usage
    Total Size: 2048.01 MB
    Free Log Area: 1330.38 MB
    Used Log Area: 335.96 MB
    Unsaved Log Area: 335.96
    Log since Last Data Backup: 0.00 MB
    Thanks,
    Mark

  • Clip Size Imported Smaller Than Original Clip

    I imported a QT movie 3.69GB into iMovie and the imported movie was 650mb. I guess using iMovie all this time I just assumed that the size of the clip would be the same after importing into iMovie. Can someone tell me why the drop in file size? Thanks.

    It was a clip from a DVD that I had saved at the highest quality as a QT movie no compression using Cinematize.
    When I imported the clip into iMovie I used no compression 29.97 fpm, 640 by 480, and sound was stereo, 48hz, 16 bit.

  • Why are some video frame sizes smaller than others?

    I am copying a number of short amateur digital video movies onto a single DVD.  All are 16:9 ratio, but whereas most fill the screen on my computer monitor and 16:9 ratio television, some appear as a smaller picture - still 16:9 ratio, but with a black border around all four sides of the picture.  Can someone please explain what causes this, and is it practical to enlarge the smaller picture movies to match the full screen ones, or will the image quality be noticeably poorer?  If it's practical to do, how do I do the enlarging?  Thank you.

    Are all clips from exactly the same source, using exactly the same settings?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0

  • Image size of iPhone 5S is smaller than screen size

    When I click any picture with my iPhone 5s, the image size is always 20-30% smaller than screen size. Its like a picture clicked from iPhone 4, is this an issue or is it designed in that way?? Coz Images clicked in potrait mode are always cropped 20-30% and I am not liking it..

    If auto adjust to fit with the Default Full Zoom extension isn't working then the pages may be using absolute values for elements and in such a case you would have to zoom the pages manually.
    Can you post a link to a few pages where it isn't working properly?

  • Physical disk IO size smaller than fragment block filesystem size ?

    Hello,
    in one default UFS filesystem we have 8K block size (bsize) and 1K fragmentsize (fsize). At this scenary I thought all "FileSytem IO" will be 8K (or greater) but never smaller than the fragment size (1K). If a UFS fragment/blocksize is allwasy several ADJACENTS sectors on disk (in a disk with sector=512B), all "physical disk IO" it will allways, like "Filesystem IO", greater than 1K.
    But with dtrace script from DTrace Toolkit (bitesize.d) I can see IO with 512B size.
    ¿What is wrong in my assumptions or what is the explanation?
    Thank you very much in advance!!

    rar wrote:
    Like Jim has indicated me in unix.com forum, That cross-post thread happens to be:
    http://www.unix.com/unix-advanced-expert-users/215823-physical-disk-io-size-smaller-than-fragment-block-filesystem-size.html
    You could have pasted the URL to be polite ...

  • Causes of ORA-01200: actual file size of x is smaller than correct size n ?

    Hello everyone
    We are running Oracle 11.2.0.3 64-bit E/E on Oracle Linux 6.2 with UEK R2 on X64.
    Using Grid and ASM 11.2.0.3 and OMF names.
    The database files are alll on SAN, the SAN vendor name not disclosed here to protect the innocent/guilty 8^)
    I have a Test database MYDB (in NOARCHIVELOG mode) and after a normal server reboot, not a crash, the following error occured on Oracle database startup.
    srvctl start database -d MYDB
    PRCR-1079 : Failed to start resource ora.mydb.db
    CRS-5017: The resource action "ora.mydb.db start" encountered the following error:
    ORA-01122: database file 1 failed verification check
    ORA-01110: data file 1: '+ASMDATA/mydb/datafile/system.256.787848913' <<<<<<<<<<---------------------------------------------------- Corrupt file on ASM disk, system tablespace this time
    ORA-01200: actual file size of 94720 is smaller than correct size of 98560 blocks <<<<<<<<<<---------------------------------------------------- ERROR message
    The ASM disks are all up and disk groups are mounted OK. The ASM protection level is EXTERNAL.
    My understanding that the only proper recovery from the above error is to use RMAN Restore Database/File/Tablespace.etc (and then RMAN Recover, when in ArchiveLog mode).
    I do have RMAN disk backups, so I don't need to "patch" the database to recover.
    This is not my question at this point in time.
    My Question is this : what are the most likely causes of such error?
    Oracle Database bug? OS bug? Disk driver error? Server hardware failure (bus, memory, etc)? Or a SAN bug?
    I expect that Oracle 11g R2 will always come up with the database "clean" if the server reboots or if server crashes (i.e. due to complete power failure) provided the actual storage is not physically damaged.
    Our SAN vendor (no names!) says they are of the opinion that it's most likely Oracle database or Oracle Linux 6.x/UEK software bug, or probably Oracle ASM 11.2 bug.
    We have opened a support call with Oracle.....
    My personal experience dealing with similar database errors on more recent releases of Oracle (9i R2, 10g R2, 11g R2) and also MS-SQL 2005 and 2008 R2 suggests this kind of a problem is most likely related to errors/bugs in storage/drivers/firmware/BIOS and SAN and not likely to be a 'database' or O/S bug.
    Perhaps you, good people on this forum, can share their experiences, as unbiased as you can?
    Many thanks

    Ive seen Ora-1200 twice I think over the years, both times there was disk problems which led to write issues which caused file problems, youve reported no such issues on your side though so if thats actually true, Im thinking bug.

  • My Mac has stopped receiving mail. Mail is still coming through to my iPhone and my wife's iPad but is not appearing on my mac. I have mail from today on the phone but nothing newer than 18 Feb on the Mac. I have not touched any settings. Can anyone adv

    My Mac has stopped receiving mail. I have a mac.com address. Mail is still coming through to my iphone and my wife's ipad but nothing is coming through to my imac.I have mail from half an hour ago on the phone but nothing newer than 18 Feb on the mac. Everythng was working fine until recently and I have not touched any settings! Can anyone help?

    So I tried something else recently and it seems to have fixed the issue. My mail is now getting new mail again and refreshing after waking from sleep without having to restart mail. Give it a try and hopefully it will help you too.
    First, make sure your Mailbox List is visible (Shift + Control + M). Then select all of your inboxes, mailboxes, and folders (not just the root folder for nested folders, make sure to select them all). Then under the "Mailbox" menu, select "Rebuild."
    It may take a while to rebuild them all if you have a lot, but like I said it seems to have done the trick for me. I hope that proves to be more of a long-term solution.

  • How do I play a Keynote 09v5.3 slideshow on my iMac at a size smaller than fullscreen?

    How do I play a Keynote09v5.3 slideshow on my iMac at a size smaller than fullscreen?

    Hi Gary
    Thanks for a conclusive answer.
    Regards
    Orchardhouse

Maybe you are looking for

  • Circle zooming parts of image - hints to get me started

    Hi! I didn't know how to explain the "zoom" in the message title so I'm linking to the page containing the effect I want to mimic: "Zoom"-effect Can someone give me some hints on how I could remake the "zoom"-effect in a Flex-application? I'm not ask

  • Anybody have problems with midi and XP? (especially anybody using a GI-20)

    Hi I'm trying to use my midi device (a Roland GI-20) with boot camp/XP but with no success. I have downloaded XP drivers from Roland but XP won't let me install them, saying they are no better than the default drivers already installed. It appears as

  • How to install new Nokia E63 firmware update via O...

    Please nokia. Is there any system or downloadable application that can download and install new Nokia E63 software(software updater over OTA)?. If there is any out there please i will like to get the link and download it. If there is not. I thing thi

  • Reinstalled 10.6.3 and success! No more trackpad problems

    So, after dealing with the freezing trackpad issue for a couple of days, I decided I'd just reinstall snow leopard from scratch. Backed up my hard drive using time machine.... installed 10.6, then the 10.6.3 combo update, then used migration assistan

  • How to manage credit for same customer in different sectors

    Dear Gurus, Here is the scenario, My client   have four different sectors but a customer can buy from multiple sectors.The credit management for the same customer must be handled  differently for each sector.The credit exposure for all sectors should