Iphone 3g pop3 email problems when having more than 1 email account.

sending emails from more than one pop email account...
after checking and re-checking settings for pop email accounts [ follow the apple settings example for setting the first email account] i found that the iphone 3G does not support having more then one smtp server in other words it does not supports - different smtp servers.] so the only way to make two or more email accounts to work correctly is to use only one smtp server for all the email accounts and this will allow to send emails from more than one email account.
i think this is a bug on the iphone 3G......!!

I access two email accounts with the iPhone's Mail client - an IMAP account and a POP account. The accounts have different authenticated SMTP servers and I have no problems sending with either account.

Similar Messages

Syntax issue when having more than 20 warnings

Hello,
when having more than 20 warnings in a compilation unit (package, procedure ...),
SQL Developer ( version 1.5.0.53)
doesn't always flag an error (like, for example, a misspelled local variable),
so instead of a compile-time error a runtime error is generated.
I tried to reproduce the situation and here is a simplified case where i've
encountered the same error.
Best regards
Alexander Andris, Prague
[email protected]
CREATE OR REPLACE
PROCEDURE PROC AS
l_arg1 pls_integer;
l_arg2 pls_integer;
-- declarations which issue PLW-07204 warnings ...( 20 or more ...)
cursor c1 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c2 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c3 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c4 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c5 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c6 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
procedure proc1 is
begin
null;
end;
BEGIN
l_arg_notdef := 42;
-- next line would not be displayed.
dbms_output.put_line (
'Error in SQLDev 1.5.0 - error on the assignment line not flagged '
|| ' by the compiler when preceded by > 20 warnings ...' ||
' (Error not shown in navigator.Same behavior also in SQLDev 1.21 ...).');
-- So, when lines 5 - 23 are commented out then line 31 is flagged as an
-- error (PLS-00201), otherwise not (runtime error only).
-- When working on a large package with more than 20 warnings and a lot of
-- code, to find an error like a misspelled local variable one would need to
-- a different IDE.Hope it is not difficult to fix this quickly ...
-- Details:
-- client platform: Windows XP
-- SQLDev: Version 1.5.0.53 Build MAIN-53.38
-- db.: Oracle 10.2 on Windows
END PROC;

Unfortunately, that's the intended behaviour.
After complaining about errors not being reported in previous versions, they did add the "Only first 20 issues are reported" warning, but unless you know that can happen, almost nobody will notice.
I keep advocating for reporting errors on top, next any warnings, until having used up the 20 spaces. If necessary, they could compile first with warnings turned off, then again with warnings turned on.
I don't think I ever put a request for this on the SQL Developer Exchange, so take a look there if you're up for it.
Also mind you can turn the warnings off yourself inside the preferences, so they won't bother (nor help) you again.
Regards,
K.

Startup issue when having more than one database on machine

Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AM

aymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM

Trial version problem when using more than 1 track - does trial version same as full one?

I am thinking of upgrading to Premiere Elements 9 as I have upgraded my laptop. But the trial version Premiere Elements 9 doesn't even perform as well (with the same media) as Elements 4.0 did on my old laptop.
My new laptop is an HP Pavilion with Intel(R) Core i7 Q720 @ 1.6GHz (I was a bit wary of the low GHz but HP explained that that was still better than a higher GHz figure for an i5). I am editing both MP4 and avi files at 720 x 480.
The problem is that as soon as I start to use more than a couple of video tracks, playback slows right up, making editing difficult. Other software packages I have trialled on the new laptop (such as Sony Vegas) don't slow up at all, but I'd rather not buy them as I am very familiar with Premiere Elements now.
Is this a problem with the trial version which woudl be solved if I bought the full version, or will it be the same?
Thanks very much for any help

The AVI format is but a wrapper. Almost anything can be inside that wrapper. This ARTICLE will give you more background, and will also tell you how to determine what is inside the wrapper.
Especially with a laptop, I strongly recommend tuning the computer for an editing session. This ARTICLE will give you some tips. Note: there are a couple of links, just for Win7. Also, there are some good tune-up tips in the forum FAQ section, to the right of the main forum page. Of special note: the active anti-virus, pop-up blockers and spy sweepers are known to cause all sorts of problems, when trying to edit video.
One major consideration with a laptop is the I/O sub-system - the HDD's. Most laptops only have one internal HDD, and that is anything but ideal. With eSATA external HDD's, one can get very nearly the same performance, as with multiple internal HDD's. This ARTICLE will give you tips on using external HDD's with video editing. Though I have 3x internal SATA HDD's in my laptop, I still rely on FireWire 800 (IEEE-1394b) externals, and they work well. Using eSATA would be even better. For more info on the I/O sub-system, see this ARTICLE.
Good luck,
Hunt

Problem is having more than one FrameAccess object running in multithreads

Hi all,
I have a problem with my system which uses JMF for frame capture for frame processing. The system flow is like this -
I use a FrameAccess.java (modified from the one provided by Sun) to grab frames. I use 5 different threads to create an associated FrameAccess object (i.e. one thread owns its own FrameAccess object ). And then they will do their own processing (all of them are implementing motion estimation thing using buffered image from the frame).
The problem is , when I examine the frames captured from the 5 threads, something irregular happened.
For example, the thread A (capturing video A) may return frames captured from video C. such scenairo happened without signs and patterns. Sometimes a thread even return something like half frame from video C and half from video B.
I would like to know if there is any way to check if it is the problem of JMF (can't synchronize frame capturing), or it's the problem of FrameAccess object (but they are in five independent threads ><")
Thank you very much...

It is a problem with how you are handling threads.
Thread one calls frame access, then thread 2 calls frame access, and it is possible that thread one will only get half a frame.
You will probably have success by syncronizing your calls to frameaccess(lock), and then unlock when that thread has a complete frame.
This way only one thread will access frame access, at any one time.
I have had this exact problem, when trying to capture every single frame, save it to jpeg.
Half the problem was writing to disk before the frame was complete, thus showing have a picture.

PRoblem when posting more than one document

Hi all,
I'm using BAPI    BAPI_GOODSMOVEMENT_CREATE to post the documents for PO_GR.when i post one document through text file it is done succesfuully. when i'm posting more than one document it is giving error "posting not possible".
My code is as follows:
loop at i_data.
concatenate '0'   i_data-stor_loc into i_data-stor_loc.
concatenate '00' i_data-plant     into i_data-plant.
    i_item-po_number = i_data-po_no.
    i_item-po_item    = i_data-po_item.
    i_item-move_type = i_data-mvt_type.
    i_head-doc_date   = doc_date.
    i_head-pstng_date = post_date.
    i_head-ref_doc_no = i_data-del_note.
    i_item-entry_qnt = i_data-entry_qty.
    i_item-stge_loc   = i_data-stor_loc.
    i_item-plant      = i_data-plant.
    i_item-stck_type = i_data-stk_type.
    i_item-batch      = i_data-batch.
I_ITEM-move_val_type      = i_data-move_batch.
    APPEND: i_item,i_head.
    CLEAR:i_item.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
   EXPORTING
     goodsmvt_header             = i_head
     goodsmvt_code               = i_code
   TESTRUN                     = ' '
IMPORTING
GOODSMVT_HEADRET            =
    MATERIALDOCUMENT            = matdoc
   MATDOCUMENTYEAR             =
   tables
     goodsmvt_item               = i_item
   GOODSMVT_SERIALNUMBER       =
     return                      = return
IF return IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
LOOP AT return.
    WRITE: return-message.
ENDLOOP.
WRITE: matdoc.
PLease specify where i'm going wrong.
Regards,
SImha.

Hi,
I had used the same FM to post multiple documents, but never faced this error.
*- Header
MOVE: sy-datum TO bapigm_head-pstng_date,
        sy-datum TO bapigm_head-doc_date,
        sy-uname TO bapigm_head-pr_uname,
        v_mblnr TO bapigm_head-ref_doc_no,
        con_bfwms_bestand TO bapigm_head-ext_wms.
*- Item
*- Populate item data
LOOP AT i_items_trans.
    CLEAR ibapigm_item.
*- Convert the matnr backto 18 char form (External)
    CALL FUNCTION 'CONVERSION_EXIT_MATN2_INPUT'
      EXPORTING
        input            = i_items_trans-matnr
      IMPORTING
        output           = i_items_trans-matnr
      EXCEPTIONS
        number_not_found = 1
        length_error     = 2
        OTHERS           = 3.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ibapigm_item-material   = i_items_trans-matnr.
    ibapigm_item-plant      = i_items_trans-werks.
    ibapigm_item-stge_loc   = i_items_trans-lgort.
    ibapigm_item-move_type = '101'.   "Goods Receipt
    ibapigm_item-mvt_ind    = 'B'.     "Goods Movement for PO
    ibapigm_item-po_number = i_items_trans-ebeln.
    ibapigm_item-po_item    = i_items_trans-ebelp.
    ibapigm_item-entry_qnt = i_items_trans-ktmng.
    ibapigm_item-entry_uom = i_items_trans-meins.
    APPEND ibapigm_item.
ENDLOOP.
*-Call FM
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = bapigm_head
      goodsmvt_code    = bapigm_code
    IMPORTING
      goodsmvt_headret = bapigm_headret
    TABLES
      goodsmvt_item    = ibapigm_item
      return           = ibapigm_ret.
*- Commit on Success
IF NOT bapigm_headret-mat_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Regards,
Raj

Problem when calling more than 1 Javascript function

Hello everybody,
I am trying to disable fields based on the value in a Select List. There is a table in which values are stored to tell if a field should be disabled for the selected value. I have created an Application Process and a JavaScript function for each field.
The problem is that only the first function is executed, and the second not.
I have tried the following:
onchange="Disable_Dagen(this);Disable_Kg(pThis);"and I have put them together in a parent JavaScript function
function Disable_Fields(pThis){
Disable_Kg(pThis);
Disable_Dagen(pThis);
}In either case only the first works, so when I change the order then the other one is executed properly.
Can anyone give me a clue on how to solve this?
My complete JavaScript definition in the header is as follows:
(the code in html_DisableOnValue is taken from the example site from Carl Beckstrom)
<script language="JavaScript" type="text/javascript">

</script>
In this case the Form Element property is set toonchange="Disable_Fields(this)"
Thanks, Wouter

Hi Roel,
Thanks again for your response.
There is a lot more to Firebug then I had seen before. Now I have turned on the Console and the Script. Initially I saw the following in the Console:
C is undefined
$x_disableItem(undefined, true)apex_3_1.js (regel 1)
html_DisableOnValue(select#P43_AFWIJKING_CODE, "101", "P43_AANTAL_DAGEN")f?p=104:...2606::::: (regel 38)
Disable_Dagen(select#P43_AFWIJKING_CODE)f?p=104:...2606::::: (regel 51)
onchange(change )f?p=104:...FPQ%3D%3D (regel 2)
[Break on this error] var gDebug=true;var gkeyPressTime;var gL...Options;html_SelectValue=$f_SelectValue;When I removed the comments before the 2 Alerts, I only got one alert when I tested it.
Then I replaced the function call to html_DisableOnValue to $f_DisableOnValue as you suggested, and that did the trick. Now it Works!
I still don't know why the html_DisableOnValue function doesn't work. I just copied it from the demo site of Carl Beckstrom. Anyway my problem is solved.
Have a nice weekend, Wouter

Page layout problem when using more than 3 iviews(with Tab Strip controls)

Hello Experts,
I am using MS Visual Studio 2005 and PDK 2.5 for .net.
I have created four iViews where two iViews are having TabStrip control which are dynamically added to iView.
When I add iViews to the page and view page ,I am not able to see the content of iViews having TabsStrip controls.
But I can see contents with individual iView.I am using 3 columns layout for this scenario.
I have tried all possible layouts available in EP.
How should I placed iViews in page so that contents of iviews having Tabsrtip control will be displayed.
Any help appreciated
Regards
Sunil Pawar

Hi Sunil,
Try changing the isolation property of iView to URL(Isolated) from Embedded-->Save .Now assign these iViews to the page.
For more info,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/97/0be13dc2fd605ae10000000a11405a/content.htm">Isolation Property</a>
Regards,
Vinoth.M

Rendering problem when viewing more than one document

Hi
I have a weird problem. When I open two or more documents the rendering of the pages gets extremely bad for all documents except the first one, which remains just fine. What to do?
BR
Christian

Hi
I have a weird problem. When I open two or more documents the rendering of the pages gets extremely bad for all documents except the first one, which remains just fine. What to do?
BR
Christian

NIO - Selector problem - when using more than one in same application

Hi,
I'm developing a multiplayer-server, which shall be able to handle at least 2000 concurrent clients. To avoid the use of 4000 threads for 2000 clients (a thread for each stream), I would like to use NIO.
Problem:
The server has of course a ServerSocketChannel registered with a Selector, and when clients connects, the SocketChannel's is received. IF these channels is registered (OP_READ) with the same Selector-instance as the ServerSocketChannel, there is no problem and the Selector recognizes when a registered SocketChannel is ready for OP_READ - BUT when the received SocketChannels is registered with another Selector-instance than the one the ServerSocketChannel is registered with, the Selector NEVER recognizes, when a SocketChannel is ready for OP_READ - why not and how do I solve the problem? Only one thread can service the same Selector-instance, and when both receiving many connections and read/write, this could easily be a bottleneck
Following is the used code; 2 classes: ClientListener (has a ServerSocketChannel registered with a Selector) and ClientHandler (has another Selector where the SocketChannels is registered and a thread-pool that services all the SocketChannels, when they are ready for read/write):
public class ClientListener {
private static final int BACKLOG = 32;
private int port;
private Thread internalThread;
private volatile boolean noStopRequested;
private ServerSocketChannel ssc;
private static Selector selector;
private ClientHandler clientHandler;
public ClientListener(ClientHandler clientHandler, String bindAddress, int port) throws InternalErrorException {
    this.clientClass = clientClass;
    this.clientHandler = clientHandler;
    this.noStopRequested = true;
    this.port = port;
    try {
      InetAddress inetAddress;
      if (bindAddress.equals(""))
        inetAddress = InetAddress.getLocalHost();
      else
        inetAddress = InetAddress.getByName(bindAddress);
      ssc = ServerSocketChannel.open();
      ssc.socket().bind(new InetSocketAddress(inetAddress, port), BACKLOG);
      ssc.configureBlocking(false);
      Runnable r = new Runnable() {
        public void run() {
          try {
            start();
          } catch (Exception e) {
            Log.echoError("ClientListener: Unexpected error: "+e.getMessage());
      internalThread = new Thread(r, "ClientHandler");
      internalThread.start();
    } catch (Exception e) {
      throw new InternalErrorException(e.getMessage());
public static Selector selector() {
    return selector;
private void start() {
    Log.echoSystem("ClientListener: Listening started at port "+port);
    try {
      selector = Selector.open();
      SelectionKey acceptKey = ssc.register(selector, SelectionKey.OP_ACCEPT);
      int keysAdded;
      while (noStopRequested) {
        SelectionKey key = null;
        keysAdded = selector.select(10000);
        if (keysAdded == 0)
          continue;
        Set readyKeys = selector.selectedKeys();
        Iterator i = readyKeys.iterator();
        while (i.hasNext()) {
          try {
            key = (SelectionKey)i.next();
            i.remove();
            if (key.isAcceptable()) {
              ServerSocketChannel nextReady = (ServerSocketChannel)key.channel();
              SocketChannel sc = nextReady.accept();
              try {
                clientHandler.registerClient(sc);
              } catch (Exception e) { e.printStackTrace(); }
          } catch (CancelledKeyException cke) {
            System.out.println("ClientListener: CancelledKeyException");
    } catch (Exception e) {
      e.printStackTrace();
      try {
        ssc.close();
      } catch (IOException ioe) {/* Ignore */}
    Log.echoSystem("ClientListener: stopped");
public void stop() {
public class ClientHandler {
private static final int INITIAL_WORKER_COUNT = 5;
private int port;
private Thread internalThread;
private volatile boolean noStopRequested;
private static Selector selector;
private Manager manager;
private WorkerPool pool;
private ClientListener clientListener;
public ClientHandler(Manager manager, String bindAddress, int port) throws InternalErrorException {
    this.manager = manager;
    this.noStopRequested = true;
    this.port = port;
    clientListener = new ClientListener(this, bindAddress, port);
    // initiating load-balanced worker-pool
    pool = new WorkerPool(INITIAL_WORKER_COUNT, (int)(manager.getMaxClients() * ClientWorker.CLIENT_FACTOR), 0.75f);
    for (int i=0; i < pool.getMinCount(); i++) {
      pool.addWorker(new ClientWorker(pool, manager));
    Runnable r = new Runnable() {
      public void run() {
        try {
          start();
        } catch (Exception e) {
          Log.echoError("ClientHandler: Unexpected error: "+e.getMessage());
    internalThread = new Thread(r, "ClientHandler");
    internalThread.start();
public static Selector selector() {
    return selector;
private void start() {
    Log.echoSystem("ClientHandler: Started");
    try {
      selector = Selector.open();
      int keysAdded;
      while (noStopRequested) {
        SelectionKey key = null;
        try {
          keysAdded = selector.select();
          Log.echoDebug("ClientHandler: out of select()");
          if (keysAdded == 0)
            continue;
          Set readyKeys = selector.selectedKeys();
          Iterator i = readyKeys.iterator();
          while (i.hasNext()) {
            try {
              key = (SelectionKey)i.next();
              i.remove();
              if (key.isReadable()) {
                key.interestOps(key.interestOps() & (~SelectionKey.OP_READ));
                ClientWorker worker = (ClientWorker)pool.getWorker();
                worker.process(key);
              } else if (key.isWritable()) {
                key.interestOps(key.interestOps() & (~SelectionKey.OP_WRITE));
                ClientWorker worker = (ClientWorker)pool.getWorker();
                worker.process(key);
              } else {
            } catch (CancelledKeyException cke) {
              Client client = (Client)key.attachment();
              if (client != null) {
                client.disconnect();
                key.selector().wakeup();
        } catch (CancelledKeyException cke) {
          if (key != null) {
            Client client = (Client)key.attachment();
            if (client != null) {
              client.disconnect();
              key.selector().wakeup();
    } catch (Exception e) {
      e.printStackTrace();
    Log.echoSystem("ClientHandler: stopped");
public void registerClient(SocketChannel sc) throws Exception {
    sc.configureBlocking(false);
    Client client = new Client(...);
    SelectionKey key = sc.register(selector, SelectionKey.OP_READ, client);
    key.selector().wakeup();
public void stop() {
}

Ok, found the solution here: http://forum.java.sun.com/thread.jsp?forum=31&thread=282069
"The select() method holds a lock on the selector that
the register() method wants to acquire. The register()
method cannot continue until the lock is relased and
the select() method will not release it until some key
is triggered. If this is the first key you're adding
then select has nothing that will wake it up, ever.
The result is, obviously, a deadlock.
The solution is to have a queue of pending connections.
You put your new connection in that queue. Then you
wake up the selector and let that thread go through
the queue, registering connections."

IPhone 5 shuts down while still having more than 15% battery remaining

I've been using my iPhone 5 for a while and a few months back it started to shut down when it still had 10% battery remaining.
I tried to send it to repair while it still had coverage but they told me that my phone was OK and that with the iOS 7 update it would get better. They also told me that it was a normal behavior, and this was supposed to happen if the remaining battery wasn't enough for the phone to operate (e.g. if there was an opened app needing a lot of power). So, since then I always close the apps that I'm not using but this hasn't solved anything.
Since I updated, the issue has just gotten worse. Now it's shutting down when it has 15%-20% battery.
Does anyone else has had the same issue?

Most likely faulty battery. If you have convenient Apple Store, make reservation and then go and ask for free quick battery diagnositic testing. Also refer them to your previous attempt to take care of this while still under Warranty.

HT1277 I have changed my email account on my computer to imap and 993 but now I'm not receiving any emails. I was originally trying to sinc my ipad and iphone and computer together so when I delete an email it will all delete together. What is the best wa

I need help to update my email and also to sinc my computer, iphone and ipad together so when I delete my emails they will all disappear together. I got the iphone and ipad to work but cant seem to get the computer to work.

E-mail provider?
Troubleshooting sending and receiving email messages

How can I get my iPhone to let me know when I get an email from Outlook?

How can I get my iPhone to let me know when I get an email from Outlook?

You don;t get an e-mail from outlook.
Outlook is just an e-mail client, just like the mail app on the iphone.
Your e-mail comes into your e-mail account, which you access from both Outlook and the Mail app.
What are you trying to accomplish?

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Try adding [email protected] as a VIP contact in your icloud mail app using the appleid used for icloud if using multiple accounts (i.e different itunes and icloud account).
But seriously that happens really !? not getting emails for using icloud services with a valid appleid.

TS3376 "maximum number of free acounts have been activated on this iphone"-this is my problem when i attempt to sign in

"maximum number of free acounts have been activated on this iphone"-this is my problem when i attempt to sign in
please tell me how to over this problem

Apple limits every phone to only three icloud accounts allowed for creation. You can create account on other device and then use it on the phone. Otherwise there is nothing that I can suggest, short of selling that phone as without icloud, phone is devalued to extent.

Iphone 3g pop3 email problems when having more than 1 email account.

Similar Messages

Maybe you are looking for