Iphone 3g shows connect to itunes
when i connect to itunes to restore it, it says error 28. Does any1 know what this means, please help!
Error 28 is normally a hardware failure. You will not be able to restore your phone if in fact it has suffered a hardware failure. To confirm, if in fact, this is the case, try restoring on a different computer than the one you normally use. Make sure that your internet connection is good & that ALL anti-virus & firewalls are turned off. Also make sure your computer has all available updates to its OS & the latest version of itunes is installed. If you get the same error, this would tend to confirm a hardware failure. You can also make an appointment at an Apple store. The geniuses will be able to tell you definitely if in fact you have a hardware failure.
Similar Messages
-
Iphone keeps showing connect to itunes logo
iphone keeps showing connect to itunes logo
Put the iPhone into DFU mode. Open iTunes on computer you usually sync with and connect the phone. Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iTunes recognizes an iPhone in Recovery Mode. Then just recover from the last backup.
-
Iphone 6 shows connect to Itunes
i have the newest version of the iPhone 6 and i tried to restore it because it was running slow and i thought it was done restoring but when i took it off of the USB it shows the connect to iTunes screen and it has been locked on this screen for the last 9 hours what can i due to solved this problem
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
when i tried to update my iphone 4s from ios 5.1.1 to ios 6.1.2 connecting through other wifi personnel hotspot connection., my iphone got switch off and showing connect to itunes with "itunes round logo" and usb cabel connection
please help me what i have to do, so i should not loose my data in iphone (messages, contacts, photos and videos etc.)
also i was confused weather i should do restore my iphone through itunes, will my all data erase?
there also showing that after restore i can get back my all data and settings?
please help me
vishal.firstly thanks for quick reply.
sorry sir,
i am confused in last line you wrote,
" This will erase the phone but you will be given an option at the end to restore to an existing backup, if you have one."
i did not understand last sentence - if i have one? you mean to say if i have data or not in my iphone?
i have many pictures, messages, contacts which are very much important.
so will it be all restore and will be backup again in my iphone if i restore?
i am extremely sorry to interrupt you again.
waiting for your quick reply
thanks and regards,
vishal -
while updating my iphone software it got intruppted and now showing connect to itune not getting restored please help
Try doing a hard reset on the phone;
1. Hold Home and Sleep/Wake buttons at the same time;
2. Wait for the Apple logo to appear (ignore the slide to Power Off option)
3. Let go of the buttons when you see Apple on the screen
4. Allow iPhone to reboot;
If you are still unable to get the phone to power on, charge, or connect to iTunes; it could possibly require service. (hardware replacement) -
My iphone 4s is locked it shows connect to itunes
my iphone 4s is locked it shows connect to itunes what do i need to do without needing a restone
n.b:i have itunes version 11.0.1.12 pleease helpLet me guess:
You have entered the wrong passcode more around 10 times?
http://support.apple.com/kb/ht1212
See the link provided.
You will have to reset the phone via iTunes. Open up iTunes on PC, then connect one end of the cable to the PC. On your phone, press the home button and at the same time put in the other end if the cable.
It will load factory settings. -
ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.
what did you learn when you search the internet for iPhone error 14?
-
after attempting to update to latest software, my iphone 4 is stuck showing "connect to itunes" picture screen. My computer will not recognize device. I have tried restarting/restoring/hard reset/reinstalling itunes and every other suggestion listed on apple troubleshooting website. thoughts?
The next step is to try recovery mode as described here:
iOS: Unable to update or restore -
i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me
That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
iPhone 5 was updated (version unknown), and now screen shows 'Connect to iTunes. When we try to do this, we get message 'iTunes could not contact the iPhone software update server because you are not connected to the internet'.
Please tell me how I fix this problem.
ThanksYes, the reason you are getting the error is the phone cannot provide internet for the laptop and then update itself. It would lose connection as you erase the firmware and try to update. You need to connect the computer to the Internet in some other fashion before you connect the phone to try and fix the update problem. As Ocean20 says, and I completely agree, how would you think you could use the Internet connection of a device that is not only going to turn off and on, but is going to get completely wiped of firmware and restored? It would completely remove the device from the equation here. Does that make sense to you?
-
My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?
Take a look at this post: https://discussions.apple.com/thread/5036467?tstart=0
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences(PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, seeiTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues. -
I cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your passcode on your iphone to connect with itunes.
appreciatedPlace the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
i have entered wrong passcode in my iphone 5s. due to this action it has been disabled. it shows message on screen"iPhone is Disabled connect to itune"
Please resolve this issue.See here: http://support.apple.com/kb/HT1212
-
IPhone shows connect to iTunes and when i connects, iTune crashes :(
I have downloaded the iOS8 and while it was upgrading the phone, the iTunes crashed and the iPhone is showing the ' connect to iTunes' symbol. But as soon as i plugged the device on my mac the iTunes crashes. Relaunching the iTunes again ended up in crashing the same . i can launch iTunes with out the iPhone connected, but again, when i connect the phone it crashes. and the phone keep showing " connect to iTunes icon".. Bad problem
Restart the Mac, restart iTunes, then connect the iPhone using the recovery mode instructions given in http://support.apple.com/kb/HT1808
-
hello there im having trouble with my iphone it says connect to itunes but it wont show up on devices this is after i dun an update because upto then my phone was fine cud u help ?
Hello aucksy,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario
Maybe you are looking for
-
Update real time account general data into a custom table
Hi, I have created a z table for storing account general data for some business requirement. I have created a program and executing batch job to update this z table on periodic basis. Can anyone suggest some other alternative solution to update this
-
Hi.... We are trying to change posting date (which is in new Fiscal year 2012) for an FB60 parked invoice , but following error message is coming "Changing of document number or fiscal year not possible here Message no. FP041" How to fix the err
-
How do i change the white background with the new ios7?
I just upgraded my iPad mini to iOS7 and now my videos are not titled, or the letters are white and are invisible against the new white background. How can I change this??
-
Value relevant storage location
Can I configure storage location on the basis of value? I mean whenever I transfer the material to that location, value of the material should be posted to a G/L account and the material remained with zero value but same quantity.
-
Pictures from computer are printing on office paper not photo =(