Iphone 3g SMS failing

Every time I use music on my phone and then try send or recieve texts/calls my phone does not work, I then have to turn it on and off for texts to work.
Can anyone help or does it just need updating?

That error normally means the phone has been jailbroken or the baseband has been replaced with an iPad baseband to unlock the phone. It can also mean that you don't have the most recent version of iTunes. See: http://support.apple.com/kb/TS3694#error1015

Similar Messages

  • IPhone 5 backup failed

    I tried several times to backup my iPhone 5 but failed.
    Several times it only run for 1 minute and told me 'the last backup could not be completed.'
    This morning, it run for almost 1hr and told me the same.
    The last backup still keeps in 2013.
    What should I do?
    I am sure I have enough space to backup!
    Please help.

    Delete the backup and try again.
    Computer iTunes > Preferences... (Windows: Edit > Preferences...) > Devices > mark your back and click Delete button.

  • I want to forward my email to my iphone as SMS, please Help!

    Hi,
    I have setup a rule in outlook to forward a copy of certain emails that i revieced to my iPhone via SMS say my address would be [email protected]
    But the problem is it won't forward to my phone, but in outlook the rule is working, copy of emails were being put to the folder i've specified.
    I need help regarding this issue.
    Any help would be greatly appreciated.
    Thanks.

    Yes, i've tried to forward it to some emails within my company and it's working, it just don't want to forward to my phone. and I am using txt.att.net sorry for that . I don't know if the exchange admin don't allow to forward it outside my company. Hmmm but when i try to send an email directly (without outlook rule) i can recieve email in my phone. Guys Thanks for your responses.

  • The latest update of my IPhone 3GS has failed, now i can't use the phone. Please help.

    The latest update of my IPhone 3GS has failed, now i can't use the phone. I have tried to restore but i get a message saying 'Iphone could not be restored. An unknown error occured(6). I am running the latest version of itunes (10.4) Please help.

    Place your iPhone in manual recovery mode or DFU mode.
    1. Connect your iPhone
    2. Open iTunes
    3. Hold down the home and power button for 8 seconds. After 8 sec, let go of the power but still hold down the home button until iTunes recognize your phone in recovery mode

  • What shall i do my iphone showing activation failed during startup?

    what shall i do my iphone showing activation failed during startup?

    Hi funkeyankey,
    It sounds like your phone is not activating correctly when you are trying to set it up. I would recommend the troubleshooting from the following article named:
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
    Restart the iPhone.
    Try to reach the activation server another way, then try to activate.
    Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
    Try connecting to iTunes if you can't activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
    If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Whatsapp for iphone 3G its failing to update it keeps saying version is too old

    whatsapp for iphone 3G its failing to update it keeps saying version is too old.

    Correct.
    If you read about the newest whatsapp update, you will see that it is compatible with ios 4.3. or later.
    Iphone 3g can only go to 4.2.1

  • Do iphones with major fails get a new replacement or a refurbished iphone

    do iphones with major fails get a new replacement or a refurbished iphone?

    They are replaced with a service unit, which may be new or may be refurbished, but there is no way to tell.

  • IPhone 5 has failed to connect to my home Wi-Fi

    my iPhone 5 has failed to connect to my home Wi-Fi and its seems am the only one experiencing this problem at home because my housemates iPhone 4 and Blackberrys get the wifi nice and clear. yet i have connected to this wifi with iphone5 before.

    Try resetting your wireless router and modem.
    Disconnect the wireless router from the power source followed by disconnecting the modem from the power source. Wait 5 minutes followed by reconnecting the modem to the power source and allowing the modem to completely reset before re-connecting the wireless router to the power source and allowing the router to completely reset with the modem.

  • Iphone 4 sms,lock sound,charge sound,alert sound not working KINDLY HELPP!

    iphone 4 sms,lock sound,charge sound,alert sound not working KINDLY HELPP!

    Why are you shouting?
    All caps indicates shouting, is considered rude and is difficult to read.
    There is no need to be rude to those trying to help.
    Good luck

  • IPhone 4s power failing within 3 hours with only 2 calls after charging overnight

    My wifes iPhone power is failing within 3 hours of overnight charge, after only 2 calls and reading about 4 e-mails. My phone however works fine. Both are the same model 4s. Any ideas?

    I have been getting 2 - 4 days use on my 4s after each of the 7.x upgrades.
    I haven't had 7.0.3 for that long, but my phone now shows 14hr 55 min standby with 2 hrs usage and 76 percent battery left.

  • Cannot erase iPhone 4 - verification failed - timed out

    cannot erase iPhone 4 - verification failed - timed out.  can anyone help?

    Hey there crazylegsoz,
    It sounds like you are unable to restore your phone with iTunes because the connection keeps timing out. There can be a number of causes for this, so I would use the troubleshooting from the following article to help resolve or isolate the issue:
    iTunes: Resolve USB-related alerts
    http://support.apple.com/kb/TS5254
    Check connections
    Try these steps to check the connection between your device or computer. You might need to do only one of these steps to resolve the issue, so test your connection after each step.
    See if the cable connection at the device or computer has come loose or unplugged.
    Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
    Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
    If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
    Close any virtualization apps (such as Parallels or VMWare).
    These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
    Restart your computer.
    Restart your iPhone, iPad, or iPod touch.
    If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
    Update to the latest version of iTunes if you haven't already.
    Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
    If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Messages sending to iPhone as SMS instead of iMessage

    I have an iPhone 6 Plus running iOS 8.3 and a MacBook Pro 17" running OS X Yosemite (10.10.2). My wife has an iPhone 6 and a MacBook running an older version of OS X. Occasionally when I try to send her an iMessage using the OS X Messages app, it tries to send the message as SMS instead of iMessage. This usually fails because cell phone service at my rural home is spotty at best. Why, when my Mac and both iPhones have solid wi-fi connections to my AirPort Extreme, would it send messages as SMS?

    Hi Ian,
    If you are having an issue with sending SMS text messages, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Messages - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Duplicate SMS, failed SMS, etc.

    Okay so now i'm having a whole new set of issues with my iphone 4. Ever since I updated to iOS 5, texts fail randomly and i have to resend them till they go through, or other people will randomly get old texts twice or three times, sometimes even more. Sometimes they get texts from yesterday again today. it's getting ridiculous and ******* everyone i know off when i'm literally not doing anything to cause this. Apple doesn't seem to have a clue why it'd do this so now i just have a case number for the issue. They had me shut off imessage, that didn't help so i decided on my own accord to do a factory restore from itunes. I'll have to see if this works. Has anyone else heard of this issue or have had similar problems? any advice would be appreciated.

    "Are we being charged for these duplicate messages by AT&T?"
    You would have to look on your bill to determine that. I would say that you are, and the reason I say this is because I've sent my son SMS msg's only to find out (at that particular time) that he needed to add on some mins to his "pay as you go" package, so technically he didn't receive the SMS. However I was charged for the outgoing SMS message. Like I mentioned above though, you would have to determine that on your own by looking at your bill.

  • Texting ex-iPhone owner is failing

    Hi everyone,
    I know there's a number of threads around the issue where someone who once owned an iMessage-capable device, can no longer receive texts from Apple users, but I seem to have a slightly different issue.
    My GF had an iPhone 4S, as did I. I upgraded to a 5s, and she moved over to a Nokia 925. All was well, until I tried testing her. This didn't work, obviously because she was no longer able to get iMessages. However, the Send as SMS option never automatically kicked in (never seems to) and the 'Send' button remained blue. My phone thought she was still an iMessage user.
    So, after reading helpful replies on here, we have:
    1. On her old phone, turned off iMessage
    2. Gone to iTunes, and removed her number
    3. Gone to the online Apple profile to delete her device - but it was not there anyway.  (my new 5s doesn't appear on my account, either)
    4. I have deleted her contact from my phone, and recreated her.
    5. I have tried turning off iMessage complately, on my phone
    And many other tricks.
    But, I am the *only* iPhone user who cannot send her an SMS. At first, no one could, and we understood it could take up to 48 hours to replicate the changes across Apple, but a week later, and while other iPhone users can now text her, I still cannot. The SMS progress bar progresses across the screen until about 95% and sits there, and then fails. Every time.
    Her phone is recieving texts from other Apple users and non-Apple users just fine, and I can text and iMessage everyone else, as I always good - except her phone.
    Any ideas what may be the issue here?
    Many thanks,

    I forgot to add, she has an iPad too - I can iMessage her just fine on that, by using her email address.
    Still unable to send texts to her iPhone though.

  • Group sms failed - which recipient?

    Hello,
    I hope you can help.
    I have the iPhone 4 with iOS 4.2. When i send a group sms and it fails to one person, how do i know which one?
    I have a friend who has lost his phone, so presume its that one but how do I know?
    Its the only flaw i have found on the iPhone, love everything else about it
    Thanks in advance
    Chris

    I have a friend who has lost his phone, so presume its that one but how do I know?
    ask them.

Maybe you are looking for

  • Float truncated when inserted into table

    Hi, I'm trying to insert float values into a table with a column of type NUMBER(4,2) and the values are getting truncated to integer values. My environment is : Database: Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production jdbc lib: 9.0.1.4 I

  • Windows does not recognise nokia 3500 connected wi...

    Generally I use my phone as a modem . As I didn't have a usb cable I used bluetooth to connect my phone. I tried to upgrade my phone's software using it's onboard software updater it says "no update found" though my phone's software version is 5.51 .

  • Using XML as a database ?

    could someone provide some resources about using XML as a database? I would like to create some solutions that temporarily uses XML as a database until the real solution is implemented where there would be some connector technology feeding xml into m

  • Should I wipe my iPhone before updating to 3.0

    ...the only reason I ask is this: My iPhone has been experiencing lag and crashes that I hope do not persist into the 3.0 update. For this reason, and to ensure a 'clean install', should I wipe my iPhone before upgrading? Message was edited by: mapex

  • Interaction with Flash files

    Hi, Whats the easiest way to interact with a flash file from flash builder? I wish to change the speed of a tween in a flash file based on a value set in flash builder. Do you have to do make my flash file a component? .. Could someone point me in th