IPhone 3G Tethering stop working after upgrade to OS4

Hi, I have upgraded my iPhone 3G to OS4 and Tethering stop working. I am using iTunes 9.2 for both Mac OS Snow Leopard and Win XP. It indicate that USB is not connected for both OS. Any help will be appreciated.

I had the same problem after attempting to update last night (on my 3G). The loss of wifi was the least of my worries, however. The update process wiped out my entire phone and reset it as a new phone, and never performed the back up. So, I wasn't able to restore from a back up. It's a glitch in the update, nothing that I did, or didn't do. The issues are too long to list... UGH!
After hours on the phone with AppleCare Sr Support last night, and 5 hrs at Apple Store today (no exaggeration!), they replaced my phone entirely. Luckily, I had a MobileMe account so, I was able to retrieve/restore my contacts and apps (although the data within my apps was lost - so I have to go through all of them again). Also lost all iCal data... two years worth... not sure how that happened, since that was also synced via MobileMe... the whole update is a mess... If you haven't updated yet, I would wait to update until they work out any kinks.

Similar Messages

  • My iphone 4s was stopped working after upgrading to IOS6.

    My iphone 4s was stopped working 2 days after upgrading to IOS6. Apple replaced it however same issue after upgrade. The new phone keeps reseting it self and turns it self off. Sometimes can not turn it on for hours, drains the battery really really quick. Anybody with same issues?

    It is probably still worth while taking it to an Apple store for a possible OOW replacement and let them make the decision, as it was broken before the OP took the back off.
    See note below...

  • Iphone file browser stopped working after upgraded to IOS 5

    Hi,
    I have an iphone 3gs which I have recently upgraded to IOS 5. But to my horror after I have done that I can no longer browser my iphone's internal storage. Iphone connected to PC via USB, the file explorer no longer available. It can still sync with itune fine but there is noway I can access the storage locater in the phone via file explorer like I used to. Mind you I still have 3GB of space there.
    Is that a bug? Or I stuffed up the upgrade some where?
    Anyone else had this experience?
    Alex

    I know whats wrong now...
    My phone had been emptied after I last restored it, after I took a picture and insert the phone back to the PC. The file browser shows up again...
    That means if there is nothing in the phone, the file browser wouldn't be too bother to even show up. Weird one...

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

  • Why does my cable selfie stick stop working after upgrading to iOS8.2?!

    I have an iPhone 6. My cable selfie stick stopped working after upgrading to iOS8.2.
    My friend's iPhone 6 is still iOS8.1, and the seflie stick works fine for him!
    How do I solve this?

    Are you using the paintbrush and have a gradient assigned to a stroke in CS6?
    Double click on paintbrush, and enable keep selected.
    If not give us a better explanation of what tool & settings you are using. (eg: blob brush, shape builder)

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

    My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

    i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

  • Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
    I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

  • My Microsoft Office 2004 stopped working after upgrading to MT.  How can I get it to work, or, how can I uninstall MT?

    My Microsoft Office 2004 stopped working after upgrading to Mountain Lion.  How can I get it to work again, or, how can I uninstall MT?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • My work e-mail stopped working after upgrading to 5 ios.

    My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • Keyboard shortcut command-w stopped working after upgrading to OSX 10.9.4

    Dear all,
    after upgrading to OSX 10.9.4 the keyboard shortcut command-w stops working after about 30 min of having the machine powered on. Interestingly, this phenomenon is not restricted to a certain app (Safari, etc.).
    In system preferences > keyboard all settings have been set to "default".
    Anybody else having the same issue?
    Many thanks,
    wolfgang

    Hi folks,
    just as quick documentation for possibly other error sources for the problem "shortcut command-w not working":
    If problem persists close all applications (allL!). Then open one app like Safari, open several tabs and check whether command-w works.
    Reason: it could happen that you've set command-w inadvertently in another app like Snagit. And when setting this the app did not tell you "listen dummy, this is a standard command, do you really want to replace a standard command with a app-specific command. Don't be surprised if it doesn't work when the app is running."
    This is what happened to me. So close all apps and check whether problem persists.
    reg,
    wolfgang

  • Iphone 3G wifi not working after upgrade

    Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

    You are not talking to Apple. This is a user to user forum.
    If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

  • Wifi stopped working after upgrade, Asus N13

    Hi,
    A couple of days ago my wireless stopped working after I ran a full upgrade.  I have tried to identify the problem to no avail.  I attempted to use the Ralink drivers for my chipset rt3072 but those worked very poorly compared to the rt2800usb driver in the kernel and it kept freezing my system.
    My relevant lsusb entry:
    Bus 010 Device 005: ID 0b05:1784 ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter (rev. A1) [Ralink RT3072]
    Output of lsmod | grep rt2
    rt2800usb 17360 0
    rt2x00usb 9026 1 rt2800usb
    rt2800lib 49258 1 rt2800usb
    rt2x00lib 35947 3 rt2x00usb,rt2800lib,rt2800usb
    mac80211 463233 3 rt2x00lib,rt2x00usb,rt2800lib
    cfg80211 430289 2 mac80211,rt2x00lib
    crc_ccitt 1363 1 rt2800lib
    usbcore 173007 11 uhci_hcd,snd_usb_audio,rt2x00usb,rt2800usb,snd_usbmidi_lib,ehci_hcd,ehci_pci,gspca_main,usbhid,gspca_zc3xx,xhci_hcd
    Output of dmesg | grep rt2
    [ 9.835141] usbcore: registered new interface driver rt2800usb
    Output of dmesg | tail after trying to connect:
    [ 3547.374615] wlan0: authenticate with 20:aa:4b:02:de:1b
    [ 3547.443545] wlan0: direct probe to 20:aa:4b:02:de:1b (try 1/3)
    [ 3547.643999] wlan0: direct probe to 20:aa:4b:02:de:1b (try 2/3)
    [ 3547.847118] wlan0: direct probe to 20:aa:4b:02:de:1b (try 3/3)
    [ 3548.050252] wlan0: authentication with 20:aa:4b:02:de:1b timed out
    [ 3554.041445] wlan0: authenticate with 20:aa:4b:02:de:1b
    [ 3554.110531] wlan0: direct probe to 20:aa:4b:02:de:1b (try 1/3)
    [ 3554.310824] wlan0: direct probe to 20:aa:4b:02:de:1b (try 2/3)
    [ 3554.513940] wlan0: direct probe to 20:aa:4b:02:de:1b (try 3/3)
    [ 3554.717073] wlan0: authentication with 20:aa:4b:02:de:1b timed out
    I am using wicd but I have also tried with NetworkManager (I have made sure to systemctl disable the one not under test).
    I tried using wireshark in monitor mode on another computer to capture the exchange for authentication.  I can see my computer request authentication and I can see the router reply back.  The reply is an authentication successful message, but then my computer immediately tries to authenticate again.
    Any help would be appreciated.

    glittercutter wrote:
    Hi,
    I have the same device and a similar issue.
    Connection works but pinging the router shows extremely high ping (over 3000ms) and high packet loss, especially when the network is under load.
    The connection drop randomly and wont reconnect until I manualy unplug and replug the usb device.
    Downgrading the kernel fixed the problem.
    Which kernel version did you downgrade to?
    I also have the same device at home and I might face the same problem when I go back home next month.
    Last edited by ico (2013-04-27 18:30:07)

Maybe you are looking for