IPhone 3G useless after 3.1.3 update

My iPhone has been working great then I did the 3.1.3 update and now it keeps switching off and the iPod tells me that I have no Content although iTunes shows that I have 8.7G of music on there. I have tried to do a RESTORE from iTunes and all I get is error 9 - could not be Restored.
My iPhone is now a paper-weight.
Looking on the internet, I now see that there are plenty of reports of problems with the 3.1.3 update - suggest waiting if you haven't updated yet.
Is there any way I can Restore my phone and get it working again?
rgds McDirt

Hello Mcdirt,
To resolve this problem you have to enter your iPhone into recovery mode.
_*Please note: If you haven't do so, please back up your data BEFORE entering recovery mode!*_
_*If you enter Recovery mode without having a backup, your data will be lost. You have been warned.*_
Of course if you have previously sync or back up your iPhone with iTunes you can use that backup.
Apple has a nice support document about how to enter recovery mode.
Hope it helps: http://support.apple.com/kb/HT1808
Good luck!

Similar Messages

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.

    I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.
    My MacBook Air is connected and my roommates phones are also connected, but my iphone that always was connected to the same network is no longer connecting to the wifi.
    The network is shown on the device but I can't join it.
    Whats going on? Does someone know how to solve this issue?
    Thank you!

    Problem persisted after fixes were done so wife called apple today.           Their fix is to turn cellular off when in the house and turn it back on when she leaves- the 4 doesn't keep the password so she has to enter the password too... This wasn't a fix ...it's just resolving the connection problem... They also said that they made ios6 have security features so nobody can hack into the wifi without having the password and it has to be entered to use the wifi.  My 5 and the iPads stay on with no problems.  It's just the 4.        So far so good...she's had wifi all day when home.    It's inconvenient but it's either completely reboot it with iTunes (which doesn't work for her) or buy a new phone and she won't do that either.
    So...Apple is saying that she didn't have to do the updates either and could've stayed with the previous iOS     but !!!too late now!!!  We've updated because we think our phones will run better but the ios6 just made it a pita for users
    I wonder if the hackers of the world are having as many issues as the peeps who are just trying to use their wifi??

  • IPhone acting wierd after 1.1.3 update.

    After the new software update, my iPhone screen stops responding randomly. It only happens while I'm on safari and the iPod. It only happens rarely on the iPod, but when on safari, it happens enough to be a nuisance. Is this a problem other people are having or is it my iPhone itself?

    Have you tried the troubleshooting steps in the order I provided with my first post in this thread with the last being calling AppleCare or making an appointment at an Apple Store?
    This is not normal except for getting slow to think from time to time with powering the iPhone off and on - which should be done with a GSM phone every few days or so regardless or a Reset which should take care of this aspect.
    I power my iPhone off and on each morning before beginning the day and I usually do a Reset once a week or so just to keep things running smooth.

  • Iphone 4 problems after 7.0.2 update--Especially with keyboard entries

    I am having serious iphone 4 problems after installing the 7.0.2 update.  Mostly it is with use of the keyboard.  Each key stroke takes about 8 seconds to show. It is truly disabling.  Apparently many others have had various problems.  The one thing the Apple Tech would tell me was that 7.0.2 cannot be uninstalled.  I have restarted & reset. Settings shows I have more that 20 free GB of space, though I don't know if that's important.
    Sure would appreciate help!  Thank you!

    settings - general - reset - reset network settings.
    also turn off automatic app updated...

  • Playlists gone on iPhone 6 plus after 8.1.1 update

    Just installed 8.1.1 on my iPhone 6 plus and all my playlists have disappeared of my iPhone not to mention it is now re-syncing all my music files to my iPhone again.  Some 5500 songs so this will take forever.  Is there anyone else who has also suffered from this problem after the update? I am sure i will run into more issues after this latest pump update.

    I Did the reset and it does not work. It will revert back to the original ringtone when I enter or leave a new wifi. Whenever I re purchase, I notice after it loads it will pop back up with the purchase price. Ugh!
    But I've spoken with numerous people with the 6's and spoken with the Apple techs and it just looks like a bug that needs to be waited out. im sure with the next upgrade (which is hopefully sooner then later) the problem will be solved. So until then we get crappy ringtone options

  • Iphone wont charge after iso7.0.3 update

    I updated my iphone 4s to the current ISO 7.0.3 yesterday morning after my phone had been charging overnight.I had a full battery after the update but when i came to put on charge again last night it wouldnt charge. I have tried 3 different charging stations but nothing is charging it. Can anyone help?

    I have the same problem.  I have an iPhone 4 and after upgrading to iOS 7.03 (my first upgrade to iOS 7), my phone volume is almost inaudible.  I have the same problem with the headphones for phone calls.  Listening to music on my headphones works fine.  I have also done a restore and set up as new phone and it doesn't fix the problem though it wasted 4 hours.

  • Iphone 5s bricked after ios 8.02 update

    Yesterday I attempted to update my iphone 5s to ios8.02. The update didn't appear that big and my wifi is currently out so I decided it should be ok doing it with 3g. The update appeared to download fine and I proceded to install. The loading bar was on for about 5 minutes at which point I left it to do stuff around the house, when I came back the phone was stuck on the black screen with the apple, I left it longer and noticed every minute or so the screen would flash blue then go back to the apple. I can't turn off the phone or restart it, I simply wait until the battery finishes. I've tried since the battery emptied but still the same situation.
    Are there any fixes I can try myself as I am in Sardinia and as far as I can see there are no authorised dealers nearby.
    Btw nothing unusal installed on my phone just ios 8.01

    Hi Si7, 
    Welcome to the Apple Support Community!
    I understand that you attempted to update your iPhone to iOS 8.0.2 but the update never finished. In this situation I would recommend working through the troubleshooting steps outlined in the attached article. 
    iOS: Not responding or does not turn on
    Cheers,
    Joe

  • IPhone not charging after 1.1.3 update

    This may or may not be related to the 1.1.3 update. My update went fine yesterday. Took my iPhone home with a full charge. This morning, the phone had turned itself off, as the battery had drained. I did not have either Wi-Fi or Bluetooth connected, and had no open applications (e.g. Show Traffic was not on). Now it seems that the iPhone will not receive any charge either from the dock-computer, or directly from the wall power socket, using the power adapter supplied.
    The phone is legal, and has no 3rd party apps on it, or ever has had.
    Anyone else experience this and can provide more information, or a fix?
    Cheers.

    I also had this problem after the 1.1.3 update. The problem is not that the phone is not recharging, but that it is not indicating that it has been recharged. To fix, simply reboot or do a hard reset:
    Press the home button (the big circle below the screen) and the sleep wake button (the button on top of the iPhone) simultaneously.
    Hold both buttons simultaneously for a few seconds, Ignore the "Slide to power off" and keep holding
    The iPhone should now shutdown automatically - (fade to black)
    Turn the iPhone back on by hitting the sleep/wake button.
    You should now see the Apple logo, your iPhone is restarting and thus booting up.
    You have completed a hard reset successfully.
    The Iphone should now correctly indicate its level of charge.

  • IPhone 4 Dead after i0S 4.3 update went wrong.

    So after finally getting round to downloading and installing 4.3 (haven't updated the iOS at all since getting it last July) I find out I can't download more than 80% or so of the update without the connection "timing out". Note, no other problems downloading large files using the same connection.
    I then downloaded the iOS from a different source (macworld) and the update seems to run smootly until it gets to the "verifying your update with Apple" point at which I get a  "the update could not be completed error 3194 message"
    Getting pretty annoyed at this point and decide to go for a hard reset and restore after saving all my purchases to see if that makes a difference (by holding the home and power keys for 10 secs then letting go of the power key) and the iPhone's screen turns black.
    It's completely dead now and I can't use it at all.
    If I try to restore the phone I am in the same situation as before as iTunes will only allow me to restore if I download and install the latest iOS. I can't download it via iTunes, and I can't install it if I get it elsewhere.
    Any ideas?

    Disabling firewall software during the update is what the regulars on this forum recommend when having problems accessing Apple's servers. And it does sound like you do.

  • Anyone unable to connect to bluetooth devices on iphone 4 GSM after 4.3.5 update?

    After I updated my iphone 4 to 4.3.5 firmware I have not been able to connect to any bluetooth devices.  Also what is strange is that I also updated my wife's 3GS to 4.3.5 and she cannot connect to any bluetooth devices eitherl.  When I search for anyone else having this issue I find nothing.  Anybody?

    cliffsnotez wrote:
    After I updated my iphone 4 to 4.3.5 firmware I have not been able to connect to any bluetooth devices.  Also what is strange is that I also updated my wife's 3GS to 4.3.5 and she cannot connect to any bluetooth devices eitherl.  When I search for anyone else having this issue I find nothing.  Anybody?
    I have no bluetooth problem after updating to 4.3.5. Have you tried un-pairing the devices, then pairing them as new devices? Have you tried Reset Network Settings? And have you seen this: iOS: Wi-Fi or Bluetooth settings grayed out or dim

  • Themes are useless after the latest GTK3 update - Theme parsing errors

    Hi!
    I have this problem, all my themes became useless.
    The main problem was the url format in the gtk.css and gtk-widgets.css files, there were "url (" but only "url(" works. I fixed it in some themes, but still none of them are working correctly. I still get error messages like this:
    Gtk-WARNING **: Theme parsing error: gtk-widgets.css:598:21: Expected ')'
    here are only tabulators
    or like this:
    Gtk-WARNING **: Theme parsing error: gtk-widgets.css:378:41: Expected valid border
    there's a correct url to an existing image
    What should I do?
    Last edited by freyr (2011-10-02 18:36:30)

    I have this too after tonight's update to gtk3.2 and I'm guessing its a bug so hopefully someone more experienced with gtk3 is already on it.
    I've got work in the morning so can't really look into it but if its not fixed by wednesday I'll give  it my best shot.
    TBH I'm starting to get sick of gtk breaking things.
    With GNOME 3.2 almost upon us there is some bad news about theme support. The current themes for GNOME Shell and GTK3 will probably break in 3.2, so I'll yet again have to adapt them. 3.2 will add much needed features in GTK 3, like border image, which will make themes look better.
    On the positive side as said though, GNOME 3.2 will be better for making themes.
    So I would guess the themes just need tweaking. I'll look into it when I have  more time.
    Last edited by llawwehttam (2011-10-02 23:09:26)

  • Ringtone problems with iPhone 6 Plus after 8.1.1 update

    After updating to 8.1.1 I noticed that my iPhone 6 Plus will not use any other ringtone no matter what is selected or assigned to a contact for phone calls. It always rings with the Apple "Opening" (Default) ringtone.

    I Did the reset and it does not work. It will revert back to the original ringtone when I enter or leave a new wifi. Whenever I re purchase, I notice after it loads it will pop back up with the purchase price. Ugh!
    But I've spoken with numerous people with the 6's and spoken with the Apple techs and it just looks like a bug that needs to be waited out. im sure with the next upgrade (which is hopefully sooner then later) the problem will be solved. So until then we get crappy ringtone options

  • Iphone 4 locked after failed latest software update

    iphone 4 locked up after a failed latest software update
    now it is not showing up or recognized by itunes.
    Any suggestions. or is it the crap apple software?
    Thanks - robert

    As for the problem and help, I just stopped by AT&T and they took care of it.
    As for my disparaging remarks, it is the way I feel and felt like voicing it at the moment.  As I recall this is still a free country (Obama thankfully has not been able to screw everything up) and I personally have never liked apple products or software. That’s my personal opinion, it is crap. This particular phone is supplied by corporate and I will get a different phone as soon as request is approved. MS software has always been much better than apple products in my experience and at a much better price.
    Best Regards,
    Robert
    (Rush Limbaugh for President)

  • IPhone 4 bricked after 7.0.6 update, anyone else have this issue?

    During the update to 7.0.6 the iPhone 4 failed to apply the update and booted up in restore mode.  When restoring the iPhone fails during the hardware firmware write and displays an "unknown error" Error 12.  It happens on multiple computers and versions OSX, including the latest version of Mavericks.  Apple support walked through after everything I tried failed and proceded to tell me that the the phone is broken and must be sent in for repair at a cost of $149.  So, unwilling to take responsibility for an update breaking a phone that was working perfectly before 7.0.6 update, that is how Apple's newest security patch bricked one of my phones.  Beware with the install!
    I was wondering if this was common with others or not?  Have you had a similar issue, let me know?

    Sometimes a hardware issue becomes apparent after a software update, and sometimes its pure coincidence. Most peoples updates will have gone well, forums show the small minority that dont unfortumnately. My 5s and my wifes 5c both worked fine for instance, even though thats no good for you, i'm just saying its not all phones and there is always a flurry of these incidents after software updates. Contact Apple and via the help line, if you have an extended warrranty as you say your phone is 1.5 years old. If there is an issue they will ask you to send your phone in, and an exchange can be made if you live to far from your nearest Apple shop possibly. If you are out of warranty then you can do an out of warranty replacement. As to it being a software issue, have you done a DFU mode restore? Hope it works out.

Maybe you are looking for

  • ServletException When Deploying Web Service Application to WL 10.3.1

    I'm attempting to deploy a web service application to WebLogic 10.3.1 built using the ANT jwsc task. The majority of the build is being done by Maven to produce and EAR file which contains the web service application WAR file, but I'm using ANT for t

  • Different GL Account for WRX - based on Valuation Class (No Material Master

    Hi Gurus, My scenario is as given below. 1. We do not have any Material Master. We create short text PO's with account assignment category "P". 2. We are also using Material Group in our PO. We have one Material Group for Domestic Purchases (say M1)

  • CS3 Bridge keyword search failure

    To the best of my knowledge this particular issue has not been covered in the dozens of prior posts about keywords.  I apologize if I've missed it. My photos, by the nature of their creation and paperwork generation, are organized by overall dividers

  • Duplicate object into multiple selected frame

    I'm looking for a script that will duplicate the selected object or the content of the clipboard into multiple selected layers inside a document. I have not find any discussions around this, but I'm asking if anyone have already seen such script. Tha

  • Error build-impl.xml:577:

    i using netbeans 6.8 and while running my program an error "build-impl.xml:577: The module has not been deployed" occured . my web.xml file is shown below <?xml version="1.0" encoding="UTF-8"?> <web-app version="3.0" xmlns="http://java.sun.com/xml/ns