IPhone 3G - WiFi, Voicemail, and Email Passwords Not Working

I've done a lot of searching online and can't find anyone that has this exact problem. First off this is NOT a jailbroke/unlocked phone. I have three main problems.
1. Everytime I turn on my phone it asks for my voice mail password.
2. I cannot connect to my Yahoo email account, it keeps telling me my password is wrong
3. I cannot connect to the WiFi in my own house when security is enabled, it keeps telling me wrong password.
The voice mail password is a hassle, but after I enter it I am able to play the visual voice mails.
I have no idea why I cannot connect to my yahoo email account. I'm able to use the same account/password when I access it online as opposed to through the iPhone.
The WiFi thing is really messed up. If I remove all security from my router, and have an unsecured wifi signal, then my iPhone can connect to it. However, whether I choose WEP, WPA, or WPA2 I cannot get it to connect even if I enter the right password/key that I've applied to the router. I've tried changing every setting that I could on my router to get it to work, but my only conclusion is the phone is jacked up.
Anyone heard of this problem or know what I can do to fix it?

I went through the same thing with my 2009 Honda Fit. Select "ignore" or "discard" on the 3G (you can switch to Airplane mode but then you will not get any phone calls as airplane mode shuts down the cellphone capabilities of the 3G). Switch your radio over to "auxiliary input". Your radio screen should show "USB loading" and then start playing whatever you last had going on the 3G. Unfortunately the system blanks out your 3G screen so you cannot control what songs/podcasts you want next from the phone. You have a bit on control through the car radio dial, but its pretty klunky. After I finish listening to a podcast I unplug the 3G, select what I want next and then plug the 3G back into the car.

Similar Messages

  • Upgraded to ios6 this morning on iphone 4. Now my email will not work and the settings are correct

    upgraded to ios6 this morning on iphone 4. Now my email will not work and the settings are correct

    Try a couple of basic troubleshooting steps that can apply to any iPad issue.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit the mail app and restart. In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    None of these things may work, but without more specific information, they are a good place to start.

  • Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently.  I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

    Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently.  I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

    For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed.  In that case, if there is a problem with comcast, the message send should just fail.
    Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
    You might find the comcast forums useful for getting the settings right - I found this:
    http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
    The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

  • HT4623 My iPhone4s updated to 7.1.1 and now my internet and email is not working. I need help?

    Sorry, I'm new to this, I installed IOS 7.1.1 on my iPhone 4s and now my internet and email is not working. 
    I have googled this on my computer and can't find any reference to this sort of problem.
    I need help. 
    Thanks in advance. 

    Try this:
    Go to Settings > General > Reset > Reset Network Settings
    See if you are able to connect now.

  • My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • Sound, Restarting and Email Msgs not working

    Recently I have had problems where the sound just stops working.  The profiles are not changing and it works for awhile, but then I start to notice the red light flashing and no sound.  The only way to get it back is to do a hard reset (I've found).
    Also, my phone decides to restart a lot . . . why and how do I get it to stop?
    This morning, going into my messages folder where all my notifications go, I can click on any type of notification to see it, except for the email messages.  I click and it just does nothing.  I've already tried reseting and this has not worked.
    Please help!

    It's ok, I fixed it.
    I got an iPhone 5. Bravo to apple for making me buy another one of their products.

  • Upgraded from Iphone 4 to 5s and text iMessage not working

    Hello,
    I've just upgraded my phone from a 4 to a 5S.  In the store the clerk called my
    phone to make sure it was working.  Before I got home my wife had sent me several
    texts that went to my old phone.  After getting home I went through iTunes and restored
    my new phone with the contacts/apps etc from my old phone.  I've tried logging out
    of all iTunes, FaceTime, iMessage etc on old phone but still can't get new phones iMessage
    to work. Also reset old phone and removed SIM card. Any suggestions to fix this?
    Thanks for your help.

    Chris,
    Thanks for the speedy response.  To answer you questions:
    No- iMessage has never worked.
    It recognizes my new phone number when I look in the cellular
    settings.  In the messages settings I can't find my phone #, just turn
    iMessage on/off, sign in with Apple ID which I've tried, SMS and a couple
    other items that's it.  No send and receive options.
    iMessage is not activated.
    My wife sent the texts to my phone number not my Apple ID.
    I'm not getting anymore messages on the old device.
    I got one text on the new phone from a buddy with an iPhone but
    it was just a SMS text. 
    I hope this info helps.
    My phone works though, I just checked, just iMessage/FaceTime
    and texts aren't working.  My wife sent me a text that neither phone
    has received. 
    Thanks

  • Email password not working

    When I had my broken phone replaced the email password got erased, so I entered it again and it keeps telling me it's the wrong password. I know it's correct because it's the same one I use in Thunderbird. Any thoughts?

    Nevermind I got it, I think I just forgot to turn on SSL and iPhone thinks "incorrect username or password" is a good way of telling me that.

  • IPhone 6 Wifi Calling - No Verification Text/Not Working

    I have an iPhone 6 and tried to enable wifi calling a few weeks ago.  Followed the process for setting it up, and everything went as it should, except I never received a message saying it was activated.  Have tried turning it on and off/restarting the phone etc several times since, however it still is not working, and I still haven't received any sort of text message to say it is activated.
    The option is there and it lets me turn it on and off, but still doesn't actually do anything.Any ideas?

    Give 150 a call to make sure it is active on your account, sometimes they need to give it a nudge.... There have been rare instances of a routers firewall blocking it too.

  • Iphone 6 fall down and touchID is not working, it says touch id unable, plz help what should i do

    iphone fall down and touchID is not working

    Anypats is right. A fall can make anything happen. Try to go into Settings> General> Reset> Reset All Settings. This will not erase any user data, but it will force the device to re-read it's internal information. You will have to re-add a few settings after this. Things like your wifi connection, alarms you've programed and a few other things. If it doesn't come back, get someone to look at it.

  • Orange light of f12 key is stuck and wif-fi and bluetooth are not working

    Since yesterday morning, I am facing this problem with my laptop. I can't use wi-fi and bluetooth on my laptop becasue the F12 key light is orange and it is stuck at orange, it is not turning white. Usually when I start my laptop that light stays orange for 2 seconds and then turn to white and I use my wi-fi. But now it is stuck at orange and wi-fi is not working. I am pressing that key again and again and it displays on screen that Airplane mode is on and off but nothing is happening and the light is stuck at orange. Network adapters are not showing wireless drivers, only ethernet driver can be seen of Realtek and network connections also not showing any wireless devices. I have done the system restore as well but nothing resolved. Kindly provide a solution regarding this. My laptop model is : HP 15-d008tu Notebook PC

    Hi,          Peform the steps listed in the below link http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/6529963/model/6622223/document/c03535285/

  • Update - TERMINAL appears in dock and email does not work.  Help.

    Hello
    Yesterday i did an update on my macair.  In dock is the TERMINAL icon (a black screen).  Also, email no longer works.
    What is terminal?  How do I get email back.
    Thanks

    There is an update (4.9.2) on the versions page for this issue.
    * https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/versions/

  • HT1688 Iphone 4 will not connect to wifi, and there is NO password on it, i have reset network connections, and it wont connect. I click other and typed the name of the wifi in and it will not work, what do i do.

    I phone 4 will not connect to wifi, and there is no password, i have tried and tried and nothing works, also the lock button doesnt work, i bought off from someone on facebook and now it will not connect to the wifi, PLEASE HELP

    http://support.apple.com/kb/TS1398

  • After restoring iPhone 4S, Login password and Keychain password not working!!

    Hey!
    So last night my Girlfriend restored her iPhone 4S running iOS 7 as new to fix a battery issue she was experiencing. Before doing this she went through and backed up her photos using iPhoto. She then restored the iPhone as new and when it had completed attempted to login to the mac as it had locked itself due to inactivity. Unfortunately she wasn't able to login and waited until I got home so I could try the password.. When I did get home I tried to login using the password but it didn't work. At that point I realised something had gone wrong so I tried all of my other passwords I had previously used with the mac as well as my Apple ID. None of them worked. At this point I booted to the Recovery 10.8.2 Partition and reset the password using the Password Reset Utility.
    I then logged in and attempted to update the Keychain Password (This was the default "Login" keychain so it should be the same password as the Users password.). It didn't accept it so I went through and created a new Keychain to test if Keychain Access Application was working. It accepted the new keychain and I could operate the Application as if nothing was wrong (There was something wrong though, all of my passwords for many websites were stored in this keychain). I then removed the reference to the keychain and moved the keychain file from ~/Keychain folder to the desktop. I then reimported the Keychain and it still did not accept the password.
    I called AppleCare to get a second opinion and spoke with a Senior Advisor who told me to just start a new one. I don't mind starting a new Keychain as I know the passwords for the main websites I browse, HOWEVER, I'd like to see if anyone knows what may have happened so I can perhaps prevent this from happening again.
    Thanks in advance,
    Nathan Freeman

    Tlix!
    Thanks for the reply! Yeah, I'm quite aware that the restore of an iPhone should not have impacted the login password/keychain password. This thought has been further concreted after consulting a few of my Apple Fanboy buddies who are fairly experienced in troubleshooting issues relating to Mac computers. In regards to try a blank password, I've actually had the exact same thought and will be trying this tonight. I'll be sure to post the results of this to let you know what happens.
    Unfortunately I haven't gotten round to making a TM backup of my device, primarily due to my current lack of an external HDD.
    Thanks,
    Nathan Freeman

  • Ever since updating to ios6, my iPhone 4 has weak to no wifi signal and iMessage will not work, MMS stopped working, and I don't get my social network notifications on wifi unless I'm close tithe router or I catch a good signal from it.

    The update has completely screwed up my 4.. No more iMessage over WiFi, I have to hold my phone in the air sometimes to catch a signal and I never had to do that before, and after the update I can't send any pictures, over iMessage or 3G .. And with the weak signal I only get my notifications from apps when it wants to.. I'll be connected to wifi and using it, but won't get any notifications, or when I do.. Its whenever the signal has registered or my phone has authenticated it, I've had these problems since last year with no fix, I've reset my router countless times, I'm on Verizon and NEVER had wifi or imessage issues before ios6 .

    Make Genius Appointment and take your iPhone to the Apple Store. Only Genius can make these determinations. The broken screen voids your Warranty. The Genius could overlook this, you never know. Take your iPhone to Apple Store, hope for the best, but be prepared to pay $149 for Out of Warranty Replacement iPhone 4. A good price for replacement of an iPhone 4 with broken screen and WiFi problems.

Maybe you are looking for

  • Question about upgrading ECC 6.0 to EHP 4 and NW 7.0 to EHP 1

    Hi All,    I have read articles about installing Enhancement Packs. How ever I am a little confused. We are currently on ECC 6.0 and NW2004s. For Portal also we are on Nw2004s (EP 7.0 SP 16) We want to install EHP4 for our ECC system. Do we have to i

  • How to include external style sheet

    Hi !! Can any one explain how to include external style sheet.

  • Why does my my noise reduced picture go back to noisy when i go from develop to library to export it?

    after editing my photo and specifically using noise reduction i will go from develop to library so that i can export it but when i do the oise reduction disappears. any ideas?

  • XL REPORTER DECIMAL PLACES

    Although may be selected for a Company 6 decimal places (e.g. prices, rates, amounts) XL returns only 2 decimal (in Report Builder and Report Composer). Is there a possibility to increase decimal places in XL? Rounding makes serious differences in re

  • OIM 11g Schedulars

    Hi OIM Experts, I am new to OIM. I have configured LDAP Sync with OID (11.1.1.5) and OIM (11.1.1.5). I need to delete all the users created in OIM under a particular OU. For Example: OU=Appadmin. Is there any default schedulars to configure this, to