IPhone 3G with FW 3.1.2 is very slow

Dear Folks,
Since I upgraded to the FW 3.1.2 form the FW 2.2.1 my iPhone 3G is much slower than before.
I think that the main problem is that the FW 3.1.2 uses more resident RAM memory, so the system is slower (mybe due the Spotlight, or maybe because the 3.1.2 was not optimized for devices with 128MB RAM memory)
I hope that Apple release a new FW version that consumes less RAM in the close future, please.
Do you suffer the same issue? Normally it is more noticeable when you load more the system like with the Phone, WiFi and Push features turned ON. (Of course, they need to be loaded in Resident RAM, and that is the reason).

Hi Paulcb,
Thanks by your opinion, but it is a fact that with the current FW 3.1.2 there is a Memory leakage bug which overloads the RAM memory with the time and makes slower the OS, forcing the user to Reboot to free the RAM.
Anyway, you can try it by yourself as I said, you only need to download this free application in the Apple iTunes Store: "A+ System monitor".
Moreover, I don't know if you use all the features as the iPod, WiFi, App Push Notifications, e-mail, Safari, etc, and I don't know how many apps do you have installed in your iPhone 3G, because that affects so so much to the stability of the OS. And it is not the same to have 16, than 32 than all the 11 tabs fulled with Apps and Games.
Again, as I said, I am not the only user suffering these lags of the iPhone OS 3.1.2,... but maybe we are demanding as much as the 2.2.1 was gaven us, but the 3.1.2 cannot.
Anyway, you should be more polite with the experiences of the others, because this is an open Discussion board to talk about them.
P.S. FYI, I already made a RESTORE, but that didn't (and will not) solve the MEMORY LEAKAGE BUG in the current FW 3.1.2. (Thanks anyway by recommend me it so much,... although I already knew.)
Cheers

Similar Messages

  • Iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

    iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

    Hi there skmonirul,
    Welcome to Apple Support Communities.
    From what I gather, iMessages are taking longer than expected to send on your iPhone 4s. If you aren’t seeing issues with other apps, try restarting your iPhone as shown here: 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    If the issue persists, try restoring your iPhone as shown in the article below.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    So long,
    -Jason

  • I just bought my Iphone 5, why is it that it is very slow or hard to connect when nearby wifi stations unlike the Ipad/Ipod units?

    I just bought my Iphone 5, why is it that it is very slow or connot connect at all when nearby WIFI stations unlike the Ipad/Ipod units?

    Have already taken the necessary steps but to no avail.  I would like to take this oppurtunity to inquire from Iphone 5 users if they experienced the same..the gadget is very slow in picking up WIFI signal unlike the Ipad/Ipod units.. If this is the case then its a big draw back for Iphone 5..it's also draining its battery fast.

  • Hp 8600 All in one printer problem with scanning through wired network its very slow!

    Hi
        i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB.  i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning? 

    Welcome to the community @Larrypat 
    I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
    Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
    Also let me know which model from the C7200 series you have:
    HP Photosmart C7250 All-in-One Printer
     HP Photosmart C7280 All-in-One Printer
     HP Photosmart C7288 All-in-One Printer
    Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
    Let me know how it goes and the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My 2010 iMac with Mavericks 10.9.2 is very slow.  How do I fix?

    I have tried the usual stuff: disk permissions repair, SMC reset, PRAM reset, dragging caches to trash, restarting computer, etc.  My internet connection and speed is good.  Computer is mid-2010 i3 iMac with 10.9.2 OS, 12GB RAM, and there is plenty of unused space on my HDD. 
    The computer is very slow to start applications and load web pages.  I ran Etresoft as some have suggested and the report is below.  Any help is appreciated. Thanks.
    Hardware Information:
              iMac (21.5-inch, Mid 2010)
              iMac - model: iMac11,2
              1 3.06 GHz Intel Core i3 CPU: 2 cores
              12 GB RAM
    Video Information:
              ATI Radeon HD 4670 - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:6:34
    Disk Information:
              WDC WD5000AAKS-40V6A0 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (172.87 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Built-in iSight
              Apple Computer, Inc. IR Receiver
    FireWire Information:
              Iomage HDD unknown_device 800mbit - 800mbit max
                        disk1s1 (disk1s1) <not mounted>: 32 KB
                        Time Machine (disk1s3) /Volumes/Time Machine: 1 TB (125.26 GB free)
    Thunderbolt Information:
    Startup Items:
              ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
              ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
    Launch Agents:
              [System] com.cisco.anyconnect.gui.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.rosettastone.rosettastonedaemon.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] net.optimum.iptv.optimumapp.agent.v3.plist 3rd-Party support link
    User Login Items:
              Microsoft Database Daemon
              Dropbox
    Internet Plug-ins:
              DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 3rd-Party support link
              o1dbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
              Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.2.1.11  3rd-Party support link
              OfficeLiveBrowserPlugin: Version: 12.3.2 3rd-Party support link
              PandoWebInst: Version: 1.0 3rd-Party support link
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              CitrixICAClientPlugIn: Version: 11.2.0 3rd-Party support link
              googletalkbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              InvisibleHand: Version: 3.9.37
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Citrix Online Plug-in  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Java  3rd-Party support link
              MacFUSE  3rd-Party support link
    Old Applications:
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              TurboTax Premier 2011:          Version: 2011.r17.007 - SDK 10.4 3rd-Party support link
              iSHS:          Version: 1.0 - SDK 10.0 3rd-Party support link
                        /Users/[redacted]/Downloads/iSHS.app
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 303.96 GB
              Destinations:
                        Iomega HDD [Local] (Last used)
                        Total size: 931.39 GB
                        Total number of backups: 147
                        Oldest backup: 2011-10-26 11:07:35 +0000
                        Last backup: 2014-03-12 00:53:28 +0000
                        Size of backup disk: Adequate
                                  Backup size 931.39 GB > (Disk used 303.96 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   9%          Google Chrome
                   6%          WindowServer
                   3%          mdworker32
                   2%          EtreCheck
                   1%          mds_stores
    Top Processes by Memory:
              135 MB          com.apple.IconServicesAgent
              123 MB          PluginProcess
              123 MB          Safari
              111 MB          com.apple.WebKit.WebContent
              98 MB          mds_stores
    Virtual Memory Information:
              9.28 GB          Free RAM
              1.66 GB          Active RAM
              303 MB          Inactive RAM
              783 MB          Wired RAM
              380 MB          Page-ins
              0 B          Page-outs

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Having trouble with facebook games " zuma blitz" lags, very slow.

    I am having problems with a Facebook game, "Zuma Blitz", the game loads faster, but lags or plays very slow. it freezes with every shot made.. impossible to play. It may be happening with others, but I play this game every day to pass time.

    This is because of the plugin-container.exe.
    if you switch dom.ipc.plugins.enabled to false in about:config
    plugin-container and the problem will dissapear

  • Need help with Leopard: screen saver glitch and very slow internet

    I performed an erase and install leopard 10.5.1 on my upgraded G4 AGP Sawtooth Computer several times. Has anyone had the following 2 problems with leopard and any suggestions to solve them? Apple telephone support has not helped thus far. The Issues include:
    1-Internet surfing (Safari and Firefox) is extremely slow worse than dial-up. I have verizon fios. Upgrading leopard to 10.5.3 and upgrading Safari did not help and took about 10 hours to download when it should have been quick.
    2- A screen saver glitch: When I click on screen saver such as beach I get this message. " Screen saver "beach" did not load properly. Error Can't load bundle" When I click on the screen savers folder, there is nothing in it. Desktop pictures work fine.
    Computer upgrades include:
    Processor-OWC Mercury Extreme [email protected] 2MB L3 Cache
    2GB memory
    Two 120GB hardrives.
    Firmware is updated.
    Thus far, all this was done:
    Apple exchanged install disk. Same results with new disk.
    I ran disk utility and everything is ok including permissions.
    I performed a safe boot with apple support.
    I Threw away cache folder and com.apple.safari.plist
    Tried firefox with same very slow surfing results.
    I even checked file system structure problem fsck -yf. Everything was ok
    Thanks in advance for any suggestions.

    Althought the behavior is the same in all three accounts, if all are working accounts I would suspect there is something all of them have installed that could be the source of the problem. Try creating a new admin account, and leave it just the way Apple creates it--don't add anything nor modify it in any way. Log into that account and see if it works correctly.
    If that account is also misbehaving, try restarting, and when you hear the chime hold down the Shift key so that you boot into Safe Mode (you'll see a notice in the splash screen about being in Safe Mode). The boot will take longer (perhaps even considerably longer) as the system runs disk repair, empties some caches, disables all third party startup items, as well as all Apple startup items not strictly necessary for the machine to run. See the menus and Dock now behave correctly.
    Since the problem is evidently somewhat intermittent in nature it may take some patience to discover what is wrong. You might also disconnect everything that didn't come with the Mac, reboot, and use only the Apple keyboard and Apple mouse and run for a bit to see how that works. If you are using a third party mouse that required installing something that would be my guess as a "prime suspect" for the cause of the problems.
    Francine
    Francine
    Schwieder

  • Whenever I try to type on my iPhone 4s with ios7.1 there is a very bad delay

    I have already tried to restart it and that didn't please help

    Have you tried to go to settings , general , reset , reset keyboard dictionary ? I do not know if this will work bit it is worth a try.

  • 4s trouble with wifi. it connects however is very slow then switches back to 3g

    If anyone out there could help I would appreciate it!
    iphone 4s brought as a replacement form Apple on the 6 September  2013 has developed an issue!
    I can connect to my home BT HomeSpot however its so slow and will then go back to 3g, so frustrating!  I have a BT Booster and the single is strong, we have no problem with any of our other devices.
    i've been to the Apple store twice now and they've said there is nothing wrong with the device as it works on there wifi!
    Can anyone help?

    I have brought the Virgin Media super hub back to the manufacturing original configuration then changed the user name and password. Only my iphone was connected. Then I've switched to 5 Ghz = 30Mbpm BANG!; went back to 2.4Ghz=dead. Now is getting worst. At the beginning it was picking at least 2Mbpm. Then 1. Then 0.something. Now it doesn't even connect. I'm pretty sure the iphone 5 must have 2 antennas and the one that uses 2.4Ghz is just gone.
    Any advice?

  • Mail slow with ios 6, and iOS 6 very slow and sticky in general

    Ok, since I upgraded to iOS 6, my mail has been totally buggy on my iPad (version 3). It keeps sticking and showing the spinning icon when trying to download mail. I do a hard reset, and it works for a little while most of the time, but then sticks again. For what it is worth, my mail downloads from an exchange server. My iPhones (the 4 that I have from before getting the 5, as wells as the 5) do mail fine.
    In general iOS 6 has made my devices as slow as mud even on other matters (one of many minor examples is that it will not unlock promptly - you try to enter the numbers and nothing happens for a few seconds - no numbers, no nothing - until it unsticks). In general, it feels like I have a PC with a virus.
    Any solutions?

    I feel this is part of the planned obselecence strategy.   Sell you a fantastic device and then proceed to break it by incremental and non-reversible upgrades that make your device less and less useful, until it is a pale shadow of the device you purchased.  Then stop providing upgrades for the product full stop, leaving it crippled.
    The only constructive advice I can think of is to never accept an upgrade, because it seems that we are always slightly worse off afterwards then before.
    Seriously; what extra useful functions has iOS6 given us over iOS5?  A few gimmicks at the expense of losing the incredibly polished and integrated YouTube and Google Maps.  And now, right on cue, scrolling of screen content is starting to judder and lag on brand new products such as iPad3.  Iphone5 will have it's turn in a few months when iOS6.1 is out.  It will be touted as a bug fix but we all know that it will be designed to simply accelerate hardware decriptude.
    Apple are in for a seriously serious wake up call in the next year if they don't get thier act together.  They can't keep on treating customers like this.  The only other piece of constructive advice I can give is this; if you own any Apple shares, sell now.
    Jon.

  • DAC task with Informatica mapping and stored procedure (very slow)

    Hello,
    We have a DAC task that launch an Informatica Workflow with a simple query and stored procedure, like this:
    SQL QUERY
    ==========================
    SELECT
    W_ACTIVITY_F.ROW_WID,
    W_AGREE_D.AGREE_NUM,
    W_PRODUCT_D.ATTRIB_51,
    W_SRVREQ_D.ATTRIB_05,
    W_ORG_DH.TOP_LVL_NAME,
    W_ORG_D.ATTRIB_06,
    W_PRODUCT_GROUPS_D.PRODUCT_LINE,
    W_PRODUCT_D.PROD_NAME
    FROM
    W_AGREE_D,
    W_SRVREQ_F,
    W_ACTIVITY_F,
    W_PRODUCT_D LEFT OUTER JOIN W_PRODUCT_GROUPS_D ON W_PRODUCT_D.PR_PROD_LN = W_PRODUCT_GROUPS_D.PRODUCT_LINE,
    W_ORG_D,
    W_SRVREQ_D,
    W_ORG_DH
    WHERE
    W_SRVREQ_F.AGREEMENT_WID = W_AGREE_D.ROW_WID AND
    W_SRVREQ_F.SR_WID = W_ACTIVITY_F.SR_WID AND
    W_SRVREQ_F.PROD_WID = W_PRODUCT_D.ROW_WID AND
    W_SRVREQ_F.ACCNT_WID = W_ORG_D.ROW_WID AND
    W_SRVREQ_F.SR_WID = W_SRVREQ_D.ROW_WID AND
    W_ORG_D.ROW_WID = W_ORG_DH.ROW_WID
    STORED PROCEDURE
    ===========================
    ConvSubProy(W_AGREE_D.AGREE_NUM,
    W_PRODUCT_D.ATTRIB_51,
    W_SRVREQ_D.ATTRIB_05,
    W_ORG_DH.TOP_LVL_NAME,
    W_ORG_D.ATTRIB_06,
    W_PRODUCT_GROUPS_D.PRODUCT_LINE,
    W_PRODUCT_D.PROD_NAME)
    The mapping is very simple:
    Source Qualifier -> Stored procedure -> Update strategy (only two ports: ROW_WID and custom column) -> Target Table
    When I launch the DAC Execution Plan the corresponding task take much time (40 minuts). But when I launch the corresponding Workflow from Informatica PowerCenter Workflow Manager this only take 50 seconds... when I see the log session for the task I can see that much time is spent on the time of the updates. For example, when DAC is running the writer updates 10000 records every 6/7 minuts, but when Workflow Manager is running thw writer updates 10000 records every 8/9 seconds.
    So, what happens (in the DAC) to that so much time difference? Is there a way to reduce the execution time when the task is launched from DAC?
    Thanks
    Best Regards
    Benjamin Tey

    Have you tried using bulk load type?
    In Workflow Manager can you open the associated task, navigate to the mapping tab and seled the target table.
    What is the value for "Target load type" and which of the following boxes are checked: Insert, Update as Update, Update as Insert, Update else Insert, Delete?

  • I have problem with Adobe Premier because it runs very slow and not smooth at all!, here are my components on computer...

    Here are my components on computer...
    Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
    I hvae Adobe premier CS6...
    Thank you guys!

    Here are my components on computer...
    Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
    I hvae Adobe premier CS6...
    Thank you guys!

  • Publish with iWeb06 produces errors and is very slow

    I have recently upgraded to OS 10.5 but am still running iWeb06. I attempted to publish a new photo page last week and got error messages saying there was a problem with a photo on an already published page. I reloaded that photo and tried again. This happened a few times but eventually the new page appeared to be published OK even though an error was still reported.
    I have now tried to publish another new page but am getting similar errors - and each time I 'correct' an image reported as an error that page shows red in the site list. The little blue circle that appears during Publish also hardly moves. The new page I am now trying to publish has not appeared in .Mac.
    If I upgrade to iWeb08 could this solve the problem? Or will upgrading change the URLs of my existing pages?

    rodinchesh wrote:
    ...will upgrading change the URLs of my existing pages?
    No.
    If I upgrade to iWeb08 could this solve the problem?
    It may or may not. There are some threads on this forum similar to yours about problems linking from a thumbnail to a page containing the larger picture. This problem doesn't appear on the iWeb '08 forum.
    One thing to consider: Within eight months, iWeb '09 will probably be released. If you don't upgrade to iWeb '08 before then, you'll be two versions behind the then current version. And if you eventually try to upgrade from iWeb '06 to iWeb '09, how will that go? How much testing will that have received at Apple? ...Probably not nearly as much as upgrading from iWeb '08 ~ the most likely scenario, thus meriting heavy testing.
    In general, it's advantageous to maintain your system on current software versions. There is much complex integration between the iLife apps, .Mac and OS X, and it's the current versions which get the most attention ~ both reporting problems and fixing them. You'll also get better help from others who are more likely to also be on those same current versions.
    And if you do decide to upgrade, make sure you back up everything beforehand. Then, if you have problems you can restore iWeb '06 and its Domain file, who's default location is:
    +~/Library/Application Support/iWeb+
    (the tilde (~) represents your home directory)
    ...from the backup to its usual location on your Mac's internal HD.
    One option for backups (of several) is to use the free SuperDuper! to create a bootable clone of your entire internal HD on an external drive:
    http://www.shirt-pocket.com/SuperDuper
    ...then you can recover individual files (such as iWeb's Domain file) or, if your internal HD fails, you can re-boot with the Option key held down. Your Mac will start into Startup Manager, where you can use the arrow keys to select a Mac OS X volume to start from, i.e. your bootable clone from SuperDuper!. Besides the advantage of not losing any valuable data, you can continue working and use Disk Utility app in Applications > Utilities to diagnose the problem.
    And this free SMARTReporter may give you an early warning of impending hard drive failure:
    http://www.corecode.at/smartreporter/

  • Mountain Lion 10.8.4 with ssd samsung 840 pro is very slow

    Hello to all,
    My name is Danilo and I'm a guy in Rome.
    I'm sorry for my bad English.
    I bought a Samsung 840 ssd hard drive on which I installed Pro Mountan Lion and I have version 10.8.4
    When I turn on MacBokk Pro, the boot time is 20 seconds. When I turn off the MacBook Pro, the time is almost 15 seconds.
    I have read on the internet that the timing must be precisely half.
    I have enabled trim with the Chameleon SSd Optimizer application.
    Do you have any suggestions?
    I installed CCleaner ... it's okay?
    Some friends told me to try Onyx ... what do you think?
    Thanks a lot,
    Danilo.

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Chann|GPU D|I/O' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the window will be empty. If you get output like this:
    kernel[0] <Debug>: disk0s2: I/O error
    the boot drive is failing, or there's some other hardware fault in the storage subsystem.
    If you get output like any of this:
    kernel[0] <Debug>: ** GPU Debug Info Start **
    kernel[0] <Debug>: ** GPU Debug Info End **
    kernel[0] <Debug>: NVDA(Private): Channel timeout!
    kernel[0] <Debug>: NVDA(OpenGL): Channel timeout!
    there's a fault in the graphics processor or logic board. The two kinds of output are not mutually exclusive, but if you get both, a logic-board fault is likely.

  • Having issues with 13" MacBook Pro. Running very slow and blank screen and sleep mode.

    Bought my MBPro summer 2009. About a month / 6 weeks ago it began to run extremely slow at points. Now it is running poorly and getting very slow on a daily basis, to the point where it will not open applications, documents or even web pages for in excess of 5 minutes. I'm beginning to lose patience!
    Also at the exact same time of these performance issues occuring, my MacBook Pro will not awaken from sleep mode when the lid is closed. Showing a blank dark screen and having to hard reset in order to boot up my system again and get it running.
    What is the best solution in order to resolve these issues?
    Your help is greatly appreciated.

    Did you run Disk Utility>First Aid?  If so what were the results?  This is a copy of mine, note that the bottom line says:  The partition map appears to be OK:
    Ciao.

Maybe you are looking for