IPhone 3G won't recover after trying to update to 2.2 firmware

When i tried to update to 2.2 my phone reset and went to the connect to itunes screen, it says its in recovery mode and when i try to restore it it gets almost to the end point on the restore bar with the apple on the phone, then the phone resets and goes back to the connect to itunes screen, ive done the reset and reinstalled itunes , none of them work, please help! i only got to use the thing one day

try putting your iphone in DFU mode and then restoring
turn your iphone off make sure it is plugged into the computer and have itunes open then at the same time hold your iphones home and power buttons release the power button after 8 seconds but continue to hold the home button until your iphone shows up in itunes your screen should still be black if logo appears try again
i had the same problem when i updated to 2.0 from 1.1.4 i tryed everything and even using DFU MODE didnt work
i have no apple store near me and didnt feel comfortable shipping my iphone so i brought it to a iphone/mac specialist store they hooked it up and ran some thing and said the update gave me two basebands whatever that is and somehow they deleted one and then the restore worked
good luck
if you need help getting into DFU MODE try google for help

Similar Messages

  • IPhone 4s won't activate after restore and update

    After trying to update my iPhone 4s to iOS7 and it crashing halfway through I had to restore the phone. Now the phone seems to have iOS 7 but while trying to set it up it comes up with 'Could Not Activate iPhone'. It's something to do with the activation sever not being able to be reached. I have no idea what any of this means and every other discussion confuses me so if someone could explain how on earth I get my bloody phone back in simple language that would be marvellous

    I have the same problem.  Have you figured it out?

  • ITunes won't open after trying to update

    I updated my iPhone 5C to IOS8  yesterday, and when I plugged it into my computer it said I needed to update my iTunes. When I tried to update it, it wouldn't work and told me to do it manually. It then came up with the screen that searches for updates, and I pressed cancel so that I could press the tools button. When I pressed tools, I could not click on the top option that I was supposed to select. I closed the tab and now iTunes won't open.

    Hello snowwhitesapple,
    Thanks for using Apple Support Communities.
    I'd like you to please follow the steps in the article below to completely uninstall iTunes, and then reinstall the new version.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Take care,
    Alex H.

  • Itunes won't open after trying to update iphone4 to ios 5

    I tried to update my iphone 4 to the ios 5, but at first it wouldn't update and now my itunes freezes when it opens and my library is damaged. What do I do? PLEASEEEEE HELPPPPPPP !!!!

    Hello snowwhitesapple,
    Thanks for using Apple Support Communities.
    I'd like you to please follow the steps in the article below to completely uninstall iTunes, and then reinstall the new version.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Take care,
    Alex H.

  • IPhone 6 won't charge after 8.02 update

    Hi,
        Since the 8.02 update my iPhone 6 won't charge from any of my 3rd party cables and will only charge using the apple cable; despite my 3m cable being "apple approved" and the battery indicator showing its charging on the phone, the power still goes down even while it's plugged in and it's saying the phone is charging. I'm just wondering if anyone else has had this issue since the update? All chargers are working fine on my iPad running 7.1.2 and worked fine while I was using 8.01 on my phone however since updating to 8.02 the only charger that seems to work is the official apple one which I'd rather not use as they aren't long enough. Any help would be appreciated.

    For the iPhone 4S, Apple seems to have used a faulty WiFi chip which in some cases seems not to be able to handle the load of the iOS. This can lead to overheating issues which can eventually cause a hardware failure
    As customers in good faith we bought this product
    We paid a large amount of money  (I paid some $800 last year) since we believed we bought a quality product in the believe we could use it -with good care of course- for at least 2, 3 or even 4 years to come
    We upgraded the firmware from iOS 5 or 6 to iOS 7 since Apple advised us to do so (as is very obvious from the constant messages in the settings menu of the iPhone and in iTunes)
    We followed all the regular procedures as advised by Apple in the upgrade
    There is no way how Apple could hold us responsible for having done a 'wrong' installation, making us responsible for our own actions.
    Apple has been aware for over a year the Apple 4S WiFi chip is not reliable (A Google search on iPhone 4S Wifi greyed out will proof my point) and was therefor fully aware this "greyed out" problem - which also occurred when iOS 6 was introduced, might very likely occur again with the introduction of iOS 7.
    Since Apple did not inform her customers of this risk the customers were not given the choice to either upgrade (knowing the risks) or staying with the previous (working) version.
    Apple does not enable the users to return to the previous version of iOS, and even if Apple would allow the users to return to a previous version, there is a great risk the hardware has become seriously damaged already in the upgrade to iOS 7, making this not a feasible option.
    As result of this us, we, customers are now stuck with an unusable iPhone for which we paid plenty of money and so support from Apple whatsoever in solving this issue.
    I feel that Apple should take their responsibility and help her customers in solving this quality issue.
    ( One thing I am sure of, if Apple would be a car manufacturer or an airplane manufacturer they would never get away with this, and would be forced to do a recall)
    My message to Apple:
    You know thousands of your customers are affected by this fault. It is now time to act. Taking responsibility never hurts (even if you for some reason feel you are not fully to blame) It gives you credit. And credit gives you loyal customers.

  • Iphone won't work after trying to update

    I started to update, got an error message and when I clicked ok to stop the update, I noticed an arrow with a usb icon pointing to an itunes icon on the phone. Can't get rid of it. Tried several times to restart the phone-nothing. Help... Tried restarting itunes etc etc. no help.

    Thanks for the info. Any other things to try before using the restore? I hadn't done a sync since I just got home after being with my grandbabies and taking tons of videos and pictures. I'd hate to lose those if there's a way around it.

  • My iPhone 5c won't charge after i have updated to IOS 7.0.6. I have tried amny different outlets, cleaned the iPhone wires and stuff. But nothing won't work!

    Please help, I have been buying new wires and everything but it won't work.

    Basic troubleshooting from the User's Guide is reset, restart, restore.
    Try each of these in order until the issue is resolved.

  • IPhone 4S is a brick after trying to update yesterday

    My phone was almost out of juice yesterday afternoon and I did not have my AC Charger.  I plugged it into the USB port on my PC and continued to try and work and Itunes popped up saying there was an update available etc.  Updated it to the iOS 7 when it first came out but figured Ok Microsoft's updates all of the time so why not. followed the prompts to back up to iCloud, went through all of the ridiculous updating infomration, Credit Card on file etc.  But when it was done my phone was stuck in RESTORE mode.   I have tried every button pushing fix on the web.  This is so frustrating.  My phone worked perfect until IAPPLE/ITUNES got a hold of it.  Never had a Microsoft's update ruin my entire computer. 
    I took it to the local tech center today and they told me I was just f'd and offered to sell me a new phone or charge me $200 for a warranty replacement.  Said that all of the water thingies or whatever were tripped or something like that.  3 months ago someone spilt their coffee on the table and it got slightly wet.  It did go out for a few hours but has been up and running perfectly, absolutely perfectly for over 3 months now.  That is until I plugged it into the dang ITUNES thing.  I am NOT going to pay for a new iPhone.  Apple jacked it up, Apple needs to fix it.  It is obvious that this is happening everywhere to all types of phones, iPads etc.  It is all over the web. 
    Does anyone have any solutions here?????????????????

    AnjieAllen, shrug off the critic. As you said, you are not alone with this problem and I doubt it was caused by delayed damge from the coffee spill. As a matter of fact, the software update ruined my iphone 4s and after spending two days trying to fix it, including a trip to the Apple Store, searching for online tricks, and contacting Apple support, I gave up and bought a brand new iphone 5s. When I set it up the new iPhone and updated to the latest software, thinking what are the chances this would happen again to my brand new iphone. Well, it did!
    So now I have two iphones stuck in recovery mode and nothing works to get them out of recovery mode. I have spent two and a half hours this afternoon online chatting with Apple support and they can not figure it out either. The fact is, Apple released software that has rendered their products useless and likely resulted in the loss of priceless data belonging to their customers. I hope we see an acknowledgement from Apple about this problem and what they intend to do to compensate and/or assist customers.

  • IPad and IPhone stuck in recovery mode after trying to update to ios 6

    I tried updating to ios on my Ipad 2 via computer and after the update downloaded a error message appeared my Ipad is now stuck in recovery mode. Is this happening to anyone else? SORT IT OUT APPLE!!!!

    Do you have to restore your iPhone again? You could try uninstalling and reinstalling iTunes. You could also try checking out this link.
    http://www.ipadforums.net/jailbreaking-hacking-tutorials-how-guides/28716-how-re solve-itunes-unknown-error-3194-a.html

  • Iphone 3GS Error code 14 after trying to update to ios4

    Hi!
    So i tried to upgrade my iPhone 3GS, which I just got back from apple, to iOS4.
    After downloading iOS 4 via iTunes it started installing and then crashed right when it began installing. Bam Error Code 14.
    Funny thing i upgraded my Girlfriends 3G two days earlier on the same book.
    Well so I started trying everything:
    Use an other USB Port
    Use an other cable
    Create new user on Mac and reinstall iTunes
    Redownload ios 4 via iTunes
    Redownload ios 4 via the Internet
    Try in DFU Mode
    Even tried downgrading to Os 3.1.3./3.1.2
    Of course also tried an other pc and an other mac.
    nothing works for me!
    Kinda annoyed cauz I really need my Phone!!!
    Anyone got an idea?

    1. Perform USB isolation troubleshooting, including a different USB port directly on the computer.
    2. Put a USB 2.0 hub between the device and the computer, or eliminate the hub if using one.
    3. Try a different USB 30-pin dock connector cable.
    4. Eliminate third-party security software conflicts by disabling all anti-virus & firewalls.
    5. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
    6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    7. Try to restore from another known-good computer and network

  • Iphone 5s won't work while trying to update to ios 8.0.2

    Attempted to update iPhone 5s to 8.0.2 from a version of iOS 7, received an error message (made the mistake of not documenting the error code). Now the device will not turn on past about two seconds of the Apple logo, and the computer will not recognize the device. The device will not enter recovery mode. I have tried restarting iTunes and resetting the Apple Mobile Device service multiple times. Help please, thank you!

    Hey eryic,
    Thanks for the question. After reviewing your post, it sounds like the iPhone wont turn on. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue.
    iOS: Not responding or does not turn on
    iOS: Device not recognized in iTunes for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Iphone email won't boot after the latest update

    Ive tried removing the account then restarting the phone and re entering the account, I've also followed the same process and reset the iPhone and re-entered the email account. Both with the same result. it crashes when opened. However, it still recognizes how many emails are in my inbox

    I am having a similar issue whereas my inbox quit updating after the install 0f 8.1.2

  • IPhone 5 won't boot after 8.1 update

    I'm having an issue with my iPhone 5. I just upgraded from 7.0.4 to 8.1. After that, i turn the power button on, the white bootup screen shows, then the phone shuts right off. It does this when i plug it into a power source as well. I just can't get it to boot into the phone itself at all. What happened, and what can i do to get it back?

    Hey mknabster,
    Thanks for the question. After reviewing your post, it sounds like the iPhone will not turn on. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iOS: Not responding or does not turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • IPhone 5s screen is flickering after trying to update to iOS 7.1.2

    I have an iPhone 5s about a year old. Today I started an update to iOS 7.1.2. The first issue was that it froze on the white screen with the black logo and the progress bar. For about 30 minutes it was stuck on 50% progress. It was at this point that I unplugged the phone and forced shutdown by holding the lock and the home button simultaneously. When I started it back up I noticed flickering around the edge of the screen. I have found that when I turn the brightness down the flickering goes away but I wanted to know if anyone has had success solving this flickering issue.
    Thanks for reading
    iPhone 5s
    iOS 7.1.2

    What you need to do is isolate whether or not this is a Software or Hardware issue.
    Plug your device into your computer and hold the sleep/wake button and the home button at the same time. after roughly 10 seconds the screen will go black. at this point, release the sleep/wake button but keep holding down the home button. You will get a prompt from your computer in iTunes saying that a phone in Recovery Mode has been detected. Go ahead and restore your device. After the restore completes, your device will be fully updated and have fresh software. This process will determine if the issue is Software or Hardware related. If the issue is still present then it looks like you definitely have a hardware issue.
    The good news is, Since the iPhone 5s hasn't even been out for a year yet, you are still covered under Apple's 1 year Limited Warranty. With this being said, if you make a Genius Bar appointment for the Apple Store closest to you, they will be able to help you. iPhone 5s's aren't able to receive display replacements either, so you will actually end up getting a whole new device. (This is all assuming there are no cracks or liquid damage to your device, and if they don't fix the issue in another way, of course)
    Regardless, I would probably go down to an Apple Store if possible.
    Best of luck!
    Cheers, Jon

  • HT4623 Help my iPhone will not turn on after trying to update

    After looking at my phone and realising that it had an update I decided to update... It was norton charge or plugged in and now will not turn on? Tried plugging it in but has been on charge for about an hour now and it's still not turning on? Pls help... Tried the home button and the on/off button together but still no joy

    neilied wrote:
    It was norton charge or plugged in
    Sorry... What does this mean. ?
    neilied wrote:
    Tried plugging it in but has been on charge for about an hour now and it's still not turning on?
    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...

Maybe you are looking for

  • How to use this function in crm5.2 -   /CEM/ENT_IMPORT_DATAFROMEXCEL

    i am having a problem regarding how to use this function to import values from an excel sheet. in call funtion what to specify at place of ct_ent_action = ? CALL FUNCTION '/CEM/ENT_IMPORT_DATAFROMEXCEL'   CHANGING     CT_ENT_ACTION       = EXCEPTIONS

  • Font command fails on solaris

    I have a program which runs fine under Windows but fails in Solaris when it gets to the line font=new Font(null,FONT.plain,current_font_size); (I have tried SansSerif and Lucida in place of null. It is being run from a shell script as a batch process

  • Tells me iDisk is full, and I can't publish my website

    Hello, I'm using iWeb '09 and recently took on the mobileme 2 months trial period. It will end on the 17th of April. I began publishing a blog and it worked really well ( I have not more than 7 articles though ). But now, all of a sudden, on the webs

  • Normal Indexes created for Primary/Unique Keys in Oracle8/8i

    I remeber prior to Oracle8, when we create a Primary/Unique Key constraints, an unique index will be created by default. But I am noticing now in 8/8i when we create either Primary or Unique key, only normal/simple index is created. We are not able t

  • Update T093_ACCOBJ table

    Hi, Could you tell me in what point of configuration we can update T093_ACCOBJ table, please? We would need aditional information regarding this table. Thanks in advance, SAP user