IPhone 3GS 3.1.2/5.11.07 baseband after restore normal to iTunes just went back to recovery mode
My iPhone 3GS erased all setting and content tried to restore back thru iTunes 10.5, it process the restoration but after it just went back to recovery mode? Can any one help me to this prob or suggestion
Did you try this, copied from http://support.apple.com/kb/TS3694 ?
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Similar Messages
-
I turned off my iPhone and when i turned it back on, it went into recovery mode. When it went to recovery mode i restored it but it didnt ask me to choose backup when it finished, instead it just went back into recovery mode. I've restored it about five times already and it just keeps going into recovery mode. Anybody know how to fix this?
try using a diff computer
if you can't try creating new user account on that computer
if none works then your looking at a hardware condition... hope your warranty is still valid -
MY IPHONE 4S WONT SWITCH ON THE APPLE SIGN JUST KEEPS FLASHING ITS 4 MONTHS OLD AND HASNT BEEN DAMAGED HAD ABOUT A QUARTER OF CHARGE AND JUST WENT OFF TRIED RESETING BY HOLDING HOME AND LOCK KEY, NO LOOK, TRIED DOING IT THROUGH ITUNES, IT SAYS ITS IN RECOVERY MODE AND WILL ERASE ALL DATA AND RESET, THEN SAYS IT CANT BE BECAUSE OF AN UNKNOWN ERROR CODE3194, PLEASE HELP!
Stop using caps then I'll read your post.
-
HT201263 iPhone restores and then goes right back into recovery mode
Overnight, my iPhone 4 went into recovery mode on its own. I plugged it into iTunes, which detected a phone in recovery mode and asked if I wanted to restore it. I went ahead and clicked restore and the phone went through the whole process. I received a notice on my PC saying that the restore was complete and to wait until prompted to unplug my phone. I never received a completed sign and the phone just goes back into recovery mode and I eventually get another notice saying that iTunes detected a phone in recovery mode.
Is there any hope for my phone or is it toast?No one does. It's an iPhone 4. Totally and completely out of warranty. I use Straight Talk for my service carrier so I don't even have any sort of support from AT&T.
If I contact Apple, they will charge me $20 just to troubleshoot. Hence me posting in the community. I was hoping someone would have some further information that might assist me in determining whether there was any chance of getting the phone in working order again or if it is toast.
If the problem is hardware, like you indicated at first, it is most likely not even worth spending the money to have the hardware fixed (if even possible) because it is an iPhone 4, not under warranty, and pretty outdated. -
I have the Iphone 3gs and it said update required and i needed to connect to itunes so i did al that and now everytime i go to restore everything it just says error and then i have to do it again?whats wrong with it?
Are you getting an error message number with your error message? If so, what number are you getting?
-
Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
Everything is fine.
-They are the right format
-Quicktime is updated
-I have tried simply dragging them into the 'movie' library
-I have tried going to file<add file to library
Nothing works, has anyone else had this problem and found a way around it?
Any and all help appreciated.In addition to Mike's suggestions, you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.
-
Some songs that I've bought on iTunes won't play on my iPhone 3GS even though they used to and they will still play on iTunes. Anyone know what I can do to get these songs to play on my iPhone again? Please help!
No, I haven't figured it out. And no one from Apple has contacted me to help. Very frustrating. Sure makes me want to not buy music on iTunes and just buy CD's.
Do you have a 3GS too? Maybe it's something with that phone?? -
I am using Apple iphone 3gs and having a problem of no services after inserting sim card
I am using Apple iphone 3gs and having a problem of no services after inserting sim card, how to resolve it?
Follow this article below it will tell you step by step what to do.
http://support.apple.com/kb/ts4429
If you're still experiencing No Service, contact your carrier to check for any network or account issues that could cause these problem. -
i wanted 2 myupdate iphone 3gs i downloaded n install it crashed so i restored now i can activate it i m from nepal and what is AT&T any solution
If you are saying it is locked to AT&T again then you will need to contact AT&T and see if you qualify for an unlock.
https://www.att.com/deviceunlock/client/en_US/termsAndCondition -
i have an iphone 3gs (Model No: A1303 FCC ID:BCGA1303A IC ID:579C-A1303A) and itune 10.7. But when i am trying to upgrade to ios5 it shows the message "my iphone software is 4.2.1 and is the current version". can anyone helpe me. And when tried to download any apps from app store it get message that u need ios 4.3 to download. So please help...Thanks in advance..
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
-
trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after that this happen. i tried with other sim same message come again and again.if any body know solution let me know. thanks
Was the SIM card activated on another phone? I assume this is an ATT style trying to use on T-Mobile? Was the SIM installed correctly? Is the carrier (like T-Mobile) operating IOS 6 devices yet?
If the SIM is a valid SIM from say T-Mobile, you may want to contact them for assistance activating the SIM card.
Activation and SIM issues typically point to the carrier. And if this was a CDMA phone say working with verizon, it will NOT work for ATT or T-Mobile as they use different electronics on the 3GS. The SIM slot is for international use only. -
Hello there! I have updated iPhone 3GS software but once the update got completed the phone is not getting just restarting it again n again. Please help.
Hello Amarchand Sharma,
Are you working with a Windows computer? If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Regards,
Judy -
i reset my iPhone 3gs by erase all data and settings. After the process i was waiting till morning but its still shows the apple logo.its been 8 hours but i don't know what to do? please help me to fix it.
Something has gone wrong. Force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808 -
i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses
roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> -
i really need help here. I have only used my iphone for a month. my iphone won't switch on. it died of a low battery and i've already fully charged it and usually before it even fully charged, it will turn back on right but in my case nothing happened. i've tried holding the power and home button for 30 seconds and up to 2-3 minutes but no logo appear. it went straight to recovery mode. there's nothing wrong with my cable, i checked with itunes and this happened once a week ago but it did switch back on after i tried a few times but now it just won't switch on. i also have problems with my screen as there's some noises to the screen (i hope you get me) and when i turned the camera on, it was as if the whole screen is shaking. i'm currently studying in the middle east and there's no apple store here so i cannot use my warranty. i will only be back home in summer. please help me what should i do to at least switch my iphone on first.
I did a little bit of experimenting. I have an iPad original versions myself. I took it out of the box knowing that I haven used it in months and I expected the battery to be dead and sure enough the battery was as dead as I imagined it would be. For the first 30 minutes I experienced exactly what you are experiencing, but then the iPad suddenly powered up on its own (like it does when plugged into the charger) and I am using it now to type this response to you.
My point is that I am starting tothink that your battery has suddenly died on you for some reason or you have a hardware problem now. I would still try leaving the iPad charge for a while longer - maybe even overnight - and then try again in the morning. Unplug the iPad and try resetting with the home and sleep buttons. Try plugging the iPad in again. Unplug it, try restarting again. Let it charge for a while again.
After trying something like that, if it still will not start up, then I think it's time for a trip to an Apple Store and see what the Apple Techs think.
Maybe you are looking for
-
How to find Spool number for a 2 steps background job.
Hi All, How to find spool number (and also the background job name ) for a 2 steps background job. in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01. Also after getting the spool numb
-
I can't understand why this has happened - i went back to my entries for last year to check on a birthday that hadn't shown up for this year and i had multiple entries for each event e.g an appointment would be listed 20 times - for that date. Does a
-
Invalid I/O node config error while passing project reservations to APO
Guys, I had created a Project with WBS Element, Network & Internal activity in ECC Project Systems. This data was ciffed and seen in APO without any issue. Upon creating a Material component, as a reservation, under network activity in PS and releasi
-
NMH305 unable to browse folders DLNA apps
Hello all Bit of a strange one. Recently upgraded the firmware to 3.18.15. I use a couple of iphone apps to stream music from the hub, namely 8player and buzz player. They always had an option to browse / play the hub content by folder ( as well as
-
Hello can any one advice on this issue ? My client wants to have an AUC but he is procuring the Asset and other incidental costs through PO and need to also have to capture the Duties at the same time but the Asset is not caplitalized in the books in