IPhone 3gs Battery Heating, iPhone does not start even after the battery replaced

Hello
Last night my phone was plugged into the car charger and suddenly it went blank and turnned off itself. I Tried DFU'in it but nothing worked. I charged it but all it does is heats up. Today I replaced the battery and it sill wouldnt work. I cant turn it on at all!
Can some one please help me.
URGENT!!
Thanks

Extremely doubtful. Without being able to get the phone up and running, it's impossible to say for sure, but I'm guessing any data that was on the phone is long gone.
As for what could be the issue... at this stage, I'll have to go with an all encompassing "it's broke". You're probably going to either have to find a professional repair shop or just buy a new phone. Apple won't touch it at this stage since you opened it yourself.

Similar Messages

My Imac Does not start even after follow all recommendations of the community. I am very desappointed with Apple. Please Advice

I have a IMac 27" Core I7 Mid 2010 w/ Upgraded OS Mountain Lion 10.8.5 but I can't start it even after follows recommendations of the community. Please Advice
I am very desappointed with Apple

Imagine calling to your Doctor and saying "I'm unwell. Please advice (sic)"? What would he say? I think he'd start by asking a for a whole lot more information, wouldn't he? So, same here.

Scheduled job does not stop even after the scheduling window closes

We have written custom stats gathering job whose duration has been set as 14 hours in the schedule. This job starts daily at 6:00 PM and expected to complete upto 8:00 AM next day. But the problem is that this job continues to execute even after 14 hours. If we look at the dba_scheduler_job_run_details table, then its execution duration is about 16 - 19 hours daily. We could not understand as why it is not closed when scheduling window closes? Is there any problem with the scheduler configuration?
select job_name
      ,program_name
      ,schedule_name
      ,schedule_type
      ,stop_on_window_close
from dba_scheduler_jobs
where job_name = 'GATHER_STATS_STD_JOB';
Output:
JOB_NAME
PROGRAM_NAME
SCHEDULE_NAME
SCHEDULE_TYPE
STOP_ON_WINDOW_CLOSE
GATHER_STATS_STD_JOB
GATHER_STATS_STD_PROGRAM
GATHER_STATS_STD_SCHEDULE
NAMED
TRUE
SELECT window_name
      ,schedule_owner
      ,schedule_name
      ,schedule_type
      ,start_date
      ,repeat_interval
      ,end_date
      ,duration
      ,window_priority
      ,next_start_date
      ,last_start_date
      ,enabled
      ,active
FROM dba_scheduler_windows;
window_name
schedule_owner
schedule_name
schedule_type
start_date
repeat_interval
end_date
duration
window_priority
next_start_date
last_start_date
enabled
active
GATHER_STATS_STD_WINDOW
sys
GATHER_STATS_STD_SCHEDULE
named
+00 14:00:00.000000
high
23-feb-15 06.00.10.000000 pm +02:00
23-feb-15 06.00.10.095878 pm +02:00
TRUE
TRUE
We are using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod on Linux platform.
Message was edited by: Moazzam

Straight out of the docs 83 DBMS_SCHEDULER
stop_on_window_close
This attribute only applies if the schedule of a job is a window or a window group. Setting this attribute to TRUE implies that the job should be stopped once the associated window is closed. The job is stopped using the stop_job procedure with force set to FALSE.
Having said that, stop_job with force applies to whether information about the job is gathered - you would have to test, but I believe that the statistics gather will be terminated in the middle of whatever it's doing.
Update: force says:
force
If force is set to FALSE, the Scheduler tries to gracefully stop the job using an interrupt mechanism. This method gives control back to the slave process, which can update the status of the job in the job queue to stopped. If this fails, an error is returned.
If force is set to TRUE, the Scheduler will immediately terminate the job slave. Oracle recommends that STOP_JOB with force set to TRUE be used only after a STOP_JOBwith force set to FALSE has failed.

Iphone does not vibrate even after restoring

as mention in the title, after using my iphone 4 for about 2 weeks, i realise it is not vibrating at all, setting is checked, restoring is tried but still no working. checking other forum talk about ibrate app and it is still not working.

If you can't find a solution, I would recommend taking it in to the Apple Store so that a person at the Genius Bar can have a look and see if the problem is actually hardware or software.
You can walk in or make an appointment for a faster method either by calling or going here: www.apple.com/retail

Itunes does not start even after reinstall

Hi Ituners,
I have a 64 bit windows 7 PC. Itunes recently crashed. When I tried to run it, my PC would freeze up and I would have to reboot it. I followed the directions from the apple forum on doing a complete unistall. When I went in to uninstall the individual programs, Quicktime was not on the list. ??? I removed the other programs and went through the itunes related folders. Found quicktime there and deleted the folder (as per the instructions) and rebooted the PC.
Reinstalled itunes and all related programs showed up, but itunes will not run. I hit shift/ctrl and clicked icon to start program in safe mode. Pop-up on screen says that I may continue or exit. When I hit continue, it closes. Nothing after that.
Any help here would be nice. Itunes has become a major thorn in my side, but I need it for my Apple tv.

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

Firefox download does not start, even after multiple reloads.

On a Windows 7 laptop (HP) that's a year and a half old, Firefox refuses to download, despite multiple refreshes of the website. This CAN'T be the only time this has ever happened in the whole history of the internet. I know, I was there when mozilla was a beta test.

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

When I connect the iphone does not start automatically Itunes Please help me

when I connect the iphone does not start automatically Itunes
Please help me
How to solve this problem that I have

i've had a few issues like this.
I've found that it is an issue with items that are already on your phone.
several troubleshoots.
1) uncheck everything from syncing (apps, music, tv shows, movies, podcasts, etc), try to perform a sync, it most likely will work. Then, sync after checking each item individually (check the sync box for videos, then sync, check the sync box for podcasts, then sync, check the sync box for music, then sync, etc). One of two things will happen, 1) you will fix the problem, or 2) you will identify exactly what part of the sync setup is the culprit.
2) if the above doesn't work, I've found that it is likely an issue with files that are on your phone but your phone doesn't exaclty recognize (for example, I had copies of music on my phone that didn't show up in the music app, I went in on itunes and manually deleted those songs from my phone and that fixed the sync). to do this, check the "manually manage music and videos" box at the bottom of "summary" while your phone is connected to itunes. Then, go to the left hand pane in itunes and find your iphone device, click the drop-down arrow that shows all the categories for media on your iphone. Go to the music category in your iphone on itunes and delete all the music that shows up. Try to perform a sync - it likely will work. After this, you can uncheck the manually manage music box and re-sync your phone as normal
let me know if either works

Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

Have you tried a reset by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

HT4623 IPhone does not accept slice after Iihaddat new 6.0.1 device type as the iphone 3gs

Official solution in the iPhone does not accept SIM after Iihaddat together knowing that iTunes updated, the new release bearing ČÓ Miqubl chip device Brightening official

I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
I too have contacted Logitech for support and am awaiting a reply.
Can we get some help over here?

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

My iPhone doest not start to play the music... please help me

Hi every one, i want to play music but my iPhone does not start to play any song, when someone calles me, when playing videos on Internet my iPhone works well!, but when i play a song it does not play any song!! this is overwhelming!! I already tried to restore it but nothing the problem is still there... Please help me!

Try this link.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

IPhone 3gs Battery Heating, iPhone does not start even after the battery replaced

Similar Messages

Maybe you are looking for