Iphone 3Gs Calendar start/end time

I'm putting a lot of calender entries into my phone, but it's annoying that it only shows start times - is there anyway that this can be altered so that it shows start and end times ? It's annoying as if looking at a list, day or month, it doesn't show and could be really useful - is this something that has been suggested before or something that Iphone are looking into for a future update ?!
Thanks,

If a hard reset didn't work, you probably need to restore the iPhone.

Similar Messages

Room Booking - unavailable if start / end time is :15 or :45

Hi all,
First apologies if this is in the wrong forum.
Due to the way our school day runs, we need to be able to book rooms from :15 and :45 (e.g. 10.15 to 11.15, 11.45 to 12.45).
You can change the start / end time manually but if you do the rooms do not show as available and the suggested times only work for :00 or :30.
Is there a way to change it so the rooms can be booked for a wider variety of times?
I've googled this endlessly and the only thing I can really find that might be applicable is changing the timeincrement but I think that only applies to the calendar view and the start / end time showing 15 minute increments instead of 30 as default but
does not have any impact on room availability.
Hopefully someone can help.
Thanks a lot

Hi Chris,
It is by design and we cannot change the time slot displaying. Your understanding would beappreciated.
Besided, it is recommended to add an End date for a recurrent meeting.
Refer to:
http://office.microsoft.com/en-us/outlook/HA011276781033.aspx
http://office.microsoft.com/en-us/outlook-help/best-practices-for-outlook-2007-HA010371521.aspx
Fiona Liao
TechNet Community Support

Will syncing my iphone 3GS more than one time daily wear out the battery?

Will syncing my iPhone 3GS more than one time daily with Outlook 2007 wear out the battery? An Apple Care advisor said I should only sync it one time per week, but I need to do it daily as I use the calendars and notes for work.

CindiS wrote:
Will syncing my iPhone 3GS more than one time daily with Outlook 2007 wear out the battery?
No.
An Apple Care advisor said I should only sync it one time per week
Whoever you talked to has no idea what they are talking about. Ignore their advise.

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%.

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%. Sometimes it will reboot on its own, and other times you have to leave it for an hour or so and then manually turn the phone on again. Any ideas?

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes up again?
If this does not work, try to save as much data as you can and set it up "as new device": How to back up your data and set up as a new device

IPhone 3GS calendar is no longer syncing with iCal

iPhone 3GS calendar is no longer syncing with iCal since upgrade to Lion. No issues prior to upgrade. Ideas?

I am having the same problem. I have snow leopard and since I upgraded to itune 5.0, I have had nothing but problems. In icloud, all of my events quadrupled which then caused all my ical events to do the same on my computer and phone. What a nightmare! The apple support guy had never seen anything like it! I have since cleaned up my calendar on both my phone and macbook, but now any event I add to my phone does not show up during sync. I noticed that when I go into mail, contacts, calendars and then go into my gmail account, the calendar button is set to off. If i try to switch it on, I get a message asking what I would like to do with the local calendars on my phone. I am afraid to do anything so I just cancel! Any thoughts? The calendar on my computer is current so I could always over write my phone during a sync--but still unsure. Thanks

Contract Value Calulation based on Start & End Time

Hello Friends,
My client is into Vessel Hiring & the Vessels are given on hire for fixed period (with clear start & end dates & time).
For the above scenario we have a Periodic Contract to BIlling cycle which generates Invoices for every month. while creating the Contract we enter Basic Price as Day-Rate (Calculation type in Condition - O - Quantity - Daily Prices)
Thus the system automatically calculates the Basic Price Condition value based on number of days in any month.
Now the issue here is the client wants system to take Start & End time into consideration. In the Contract header - Contract Data tab we have developed two additional fields (Z-Fields) that capture start time & end time for every Contract.
So, we want system to calculate the Basic Price Condition value based on the Contract start date + Contract Start time.
Example :
1. Contract start date - 25.03.2010 & Start time = 12:00 noon. Basic Price = Rs. 10,000 per day.
2. In the Monthly Invoice, system would calcualte the Basic Price as Rs. 70,000 (7 days i.e. 25.03.2010 to 31.03.2010)
But here the client wants system to consider Start Time & determine Value as Rs. 65,000 as the Contract started on 12:00 noon on 25.03.2010.
Can anyone tell me how to achieve this?
I guess we should develop some routine (in VOFM) & apply it in Pricing Procedures.
But can some expert guide me on the logic of the routine & exactly where to apply the same in Pricing Procedure...
Thanks,
Jignesh Mehta

Hi,
Develop routine and make combination
if start date is xyz and start ime is less that 12 then price is so on so
if date start date is xyz and satrt time is more that 12 then price is so on so.
Hello I am not ABAPer, still tried to suggest you,don't mind for my suggestion
Kapil

Calculate report execution start & end time (Not use SE30)

Dear all Abaper,
I am writing a report which recorded the execution start & end time
The following is a part of my coding.
Data : GV_ST_TIME LIKE SY-UZEIT. "START TIME
Data : GV_EN_TIME LIKE SY-UZEIT. "END TIME
START-OF-SELECTION.
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
GV_EN_TIME = SY-UZEIT.
WRITE: / 'START TIME:', GV_ST_TIME.
WRITE: / 'END TIME:', GV_EN_TIME.
Suppose the report has executed 5 second
from time : 00:00:00 to 00:00:05.
But in the output screen, the start time and end time always display the same time(00:00:05) if following the above coding.
However, if in the debugging mode, the start time and
end time will be different and really counted.
Does anyone know the reason and how to fix it if I don't wanna use SE30?
Thx in advance~

Hi boris,
1. minor problem
2. we have to REFRESH the time value
3. using GET TIME.
(Then it will work correctly)
4.
START-OF-SELECTION.
<b>GET TIME.</b>
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
<b>GET TIME.</b>
GV_EN_TIME = SY-UZEIT.
regards,
amit m.

Adjusting Start / End Time on Apple TV

Hello everyone,
In iTunes, we have the ability to adjust the Start / End time of a song or video by right-clicking the media > Get Info > Options. Then when we playback the media the next time, it will use the settings to determine how far into the media it should start and stop. Is there any way for these settings to get passed through to the AppleTV?
- Thanks

I would also like an answer to this! The original Apple TV applied the custom Start and Stop times, however the new one ignores them and plays the whole video file! Very annoying! Any solutions out there?

Logging start & end time of map execution

Hello,
I want to log start & end time of execution of my map (OWB 11g), so I've created a table for this purpose and I used it in every map that I want to log time, twice; First for logging start time, and second for end time.
I pass a constant with SYSTIMESTAMP value through my log table and also name of my map. but the problem is, both of my records' time (start & end) are very near to each other (difference is in milliseconds!) however my map takes time for more than 2 minutes! So, I've changed my map Target Load Order to: [log table for start time] + [Main tables of my map] + [log table for end time]. I've set my map Use Target Load Ordering option True, too.
Why it doesn't work? Is there any better solution for logging every map execution time in a table, or not?
Please help me ...
Thanks.

To do that, I have created a view that lists all processes that are running or finished. The view contains fields:
process_name
process_type (plsqlmap, plsqlprocedure, processflow, etc)
run_status (success, error, etc)
start_time
end_time
elapse_time
inserted
updated
deleted
merged
You could insert into your log table using select x from this view after every map, or, how I do it, is to insert into log table after every process flow. That is, after my process flow is complete I then select all of the details for the maps of the process flow and insert those details into my log table.
Here is the SQL for my view. This is for 10.2.0.3. For
CREATE OR REPLACE FORCE VIEW BATCH_STATUS_LOG_REP_V
AS
(SELECT PROCESS_NAME,
PROCESS_TYPE_SYMBOL,
(CASE
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK', 'COMPLETE') THEN 'SUCCESS'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_FAILURE') THEN 'ERROR'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK_WITH_WARNINGS') THEN 'WARNINGS'
ELSE 'NA'
END
) RUN_STATUS_SYMBOL,
START_TIME,
END_TIME,
ELAPSE_TIME,
NUMBER_RECORDS_INSERTED,
NUMBER_RECORDS_UPDATED,
NUMBER_RECORDS_DELETED,
NUMBER_RECORDS_MERGED
FROM OWB_RUN.RAB_RT_EXEC_PROC_RUN_COUNTS
WHERE TRUNC (START_TIME) >= TRUNC (SYSDATE) - 3)
ORDER BY START_TIME DESC;

Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?

Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?
I'm all mac-based and followed the instructions for the upgrade to iOS6 software for iPhone but now my calendars won't synq. When I connect to iTunes and run the synq process, it gets stuck on the Calendar step and will not finish the synq process. I have to either wait for it to quit or force it to quit. Additionally, when I try to log a new event or meeting onto the Calendar on the iPhone, it will lock up and quit the app. I then have to shut down the iPhone to get it to open again but it just locks up again when I try to log a new event. Any suggestions? I'm tempted to do a back up and reinstall but don't want to risk any data loss.

Hi there,
I am using Rogers, which does support tethering.
The iPhone does not show up in the list of devices in the Bluetooth preference panel. It fails at the Pairing step of the Bluetooth setup assistant.
Cheers!

My iPhone 3GS keeps resetting every time I push the button at the bottom to turn

My iPhone 3GS keep rebooting every time I try to turn on iPhone pushing button at the bottom of iPhone
Now the iPhone will not do anything unless I plug charger into iPhone then it still try's to reboot and then turn off
ANY HELP WOULD BE GREATLY APPRECIATED. THANKS AND HAVE A GREAT DAY
SUMMEROG

#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414

Hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808

Can't view time or change start/end time of clip

Using imovie '09 and have several events that I imported from .mov files. imovie displays the total length of the clip but when I run the cursor over the clip in the browser the little timer window that pops up says "Created:" followed by the date/time that it was originally imported from a camera into .mov format. Every other file that I've imported directly into imovie from a camera gives me the running time of the clip as I run the cursor through the clip. I've tried to adjust the clip's date/time but it won't let me create a start/end time - regardless of what date/time I put in it assigns the same date/time to the start and end of the entire clip and doesn't show any running time so I can't mark/note specific times in the clip that I want to later select. Not sure why this is happening with these specific clips that were imported from existing .mov files - possibly because these clips were originally imported onto a pc and converted into .mov files, then imported into imovie after that? I still have the original tapes so I could import to imovie from scratch but would prefer not have to to do that as this makes up 20 hours of vid. Any solutions?

You might get a better response to your question over in the iLife > iMovie community. This forum is iMovie for iOS so most visitors here are working on a different platform, and while some may know about both products, many won't, me included.
tt2

HT4623 iphone 3gs shuting down every time

my iphone 3gs shuting down every time even the battery is full

did you find a solution?
i am having the same problem. However, if i plug the power cable in, i am able to use it. However, if i remove the power cable, it switches off.

My iphone 3gs randomly started to turn itself on and off today and it won't stop like it is continuously doing this. I haven't dropped it or anything it just randomly started doing it. I put it in rice just in case it got water on it. Help! ?

My iphone 3gs randomly started to turn itself on and off today and it won't stop like it is continuously doing this. I haven't dropped it or anything it just randomly started doing it. I put it in rice just in case it got water on it. Help! ? My phone won't even be a year old until next month and I was really wanting it to last me for 2 years. :/ What should I do?

Took my phone to the Apple store this week and they told me it was a hardware/screen malfunction. They replaced the screen for free since it was under warranty. Now it works fine again!

Iphone 3Gs Calendar start/end time

Similar Messages

Maybe you are looking for