Iphone 3GS Error code 14 after trying to update to ios4

Hi!
So i tried to upgrade my iPhone 3GS, which I just got back from apple, to iOS4.
After downloading iOS 4 via iTunes it started installing and then crashed right when it began installing. Bam Error Code 14.
Funny thing i upgraded my Girlfriends 3G two days earlier on the same book.
Well so I started trying everything:
Use an other USB Port
Use an other cable
Create new user on Mac and reinstall iTunes
Redownload ios 4 via iTunes
Redownload ios 4 via the Internet
Try in DFU Mode
Even tried downgrading to Os 3.1.3./3.1.2
Of course also tried an other pc and an other mac.
nothing works for me!
Kinda annoyed cauz I really need my Phone!!!
Anyone got an idea?

1. Perform USB isolation troubleshooting, including a different USB port directly on the computer.
2. Put a USB 2.0 hub between the device and the computer, or eliminate the hub if using one.
3. Try a different USB 30-pin dock connector cable.
4. Eliminate third-party security software conflicts by disabling all anti-virus & firewalls.
5. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
7. Try to restore from another known-good computer and network

Similar Messages

  • Iphone 4 error -1 after trying to update, stuck in recovery mode

    Iphone 4 error -1 after trying to update, stuck in recovery mode, cant get out. tried dfu mode, plugged into computer wont restore

    From Apple Support Doc.
    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    Looks like a hardware failure. Appointment at the Genius bar for evaluation and possible replacement.

  • My iPhone 3gs has frozen after trying to update to 5.0.1 and will not turn on or off. Only showing the iTunes logo and the usb cable on the screen. What can I do to fix this?

    My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?

    Here are Apple Steps: http://support.apple.com/kb/HT1808

  • HT201210 I continue to get an error 37 message when trying to restore my iphone 3GS which crashed after trying to upload the last update. Does anyone else have this problem?

    I continue to get an error 37 message when trying to restore my iphone 3GS which crashed after trying to upload the last update. Does anyone else have this problem?

    Did you manage to fix the issue?
    I have exactly the same issue as described above : I installed the update 5.1.1 on my iphone 3GS and since then, I can not turn it on anymore. In Itunes, I get an error 37 when I am doing a restauration and it stops.
    This error has nothing to do with firewall : I tried to restore the phone on several computers, including in an Apple reseller and it did not work anywhere.
    I spent several hours on phone with the hotline from Apple which arrived to the conclusion that it is a hardware issue, but the phone was working perfectly fine until I installed this update!

  • Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Try this - download a program called rec boot. follow the instructions to kick it out of recovery mode. and does itunes recognise
    or hold the power and home button together until you see a "connect to itunes" pic on the screen
    hope it helps

  • IPhone 5 error 4005 when trying to update with itunes

    iPhone 5 error 4005 when trying to update with itunes

    Hello mjy75, 
    Thank yoj for using Apple Support Communities. 
    The following article covers error 4005 when updating your iPhone.
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    Regards,
    Jeff D. 

  • Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    A12E1 download & install error http://forums.adobe.com/thread/1289484
    -more A12E1 discussion http://forums.adobe.com/thread/1045283?tstart=0
    Case sensitive https://forums.adobe.com/thread/1483096 may also help... or may not, I'm on Windows

  • HT4623 my iphone 4 needs rebooting after trying to update through air, but i dont have access to itunes. Is there any manual way to do this?

    my iphone 4 stop working after trying toupdate, how can i reboot without itunes?

    If you mean it's in recovery mode, no. There is no way around it. It must be restored using a computer running iTunes.

  • I got an error code when trying to update Ph Shop CC   U44M1P7

    I got an error code when tryong to update Ph Shop CC    U44M1P7

    Try http://forums.adobe.com/message/5980657

  • IPhone 3Gs: Error (-1) after attemped update to iOS 5

    After attempting to update to iOS 5 on my 3Gs, my iphone becomes bricked and enters recovery mode. The update proceeded as normal without issue untill it asked me to for a restore. Now, after every attempt to restore I receive the message: unknown error (-1).
    theiphonewiki.com lists error (-1) as:
    "Error occurs when one uses the "last ditch" method for preventing baseband updates on the iPhone 4. The baseband does not get updated using this method. Use TinyUmbrella to kick it out of recovery mode."
    My 3Gs is not jailbroken and I am unsure of thrid party software when it comes to my apple devices. Also error (-1) shows to be an error message for the iPhone 4, which is not the case in my situation.
    I have attempted these procedures:
    Removed the sim card, attempted recovery without sim card (x1): No change.
    Reinstalled the sim card, attempted recovery (x1): No change.
    Rebooted computer, attempted recovery (x5): No change.
    Switched USB ports, attempted recovery (x4): No change.
    Attempted recovery on multipule computers (x6): No change.
    Reinstalled iTunes, rebooted, attempted recovery (x1): No change
    Has anyone else experienced this issue? If so, has any procedure that I haven't tried worked for you? Any insight or recommendations would be very helpful.
    Thanks in advance!

    Here's what fixed it for me. Pretty simple mistake I overlooked.
    I turned off the firewall that was running in the back ground through my virus protection control panel. I then proceeded to make another attempt and it finished as it should have. I did loose all my settings, pictures and videos although, I still have the 2 notes I made in the Notes app. I would have gladly sacrificed the measurements I took for the gutters on my house for the pictures I took of my nephew the day he was born. This is a wake up call to import my photos more offten and/or before another update. Win some, loose some I guess. At least I can make phone calls now. >.<
    I hope this will work for anyone else having the same issues.
    Good luck!

  • I have iPhone 3gs. I was trying to update the software using itunes but it is showing Error "-3259" saying  connection timeout. Please help.

    I have just bought iPhone 3gs in Sept.11. I was trying to update the software using itunes but it is showing Error "-3259" saying  connection timeout. Please help.

    Did you already check your securit software settings? iTunes has to contact Apple during the update process.
    See this article: iTunes for Windows: Troubleshooting security software issues

  • IPhone 3GS error code 26

    Hi all, since I updated my iPhone 3GS 32g to iOS 5 it is dead, error code 26. I presented it at a local retailer where I bought it almost 2 years ago. After 2 weeks of waiting SBE company simply mailed me they won't repair it since it has a minor crack at the dock connector (iPhone still in guarantee). They suggest me to swap it for 339 euro for an 8 gig. Mine is 32 gig and was solid before the update! Is there anything I can do? Is error 26 unrepairable?
    Thanks for your advise!

    1. Perform USB isolation troubleshooting, including a different USB port directly on the computer.
    2. Put a USB 2.0 hub between the device and the computer, or eliminate the hub if using one.
    3. Try a different USB 30-pin dock connector cable.
    4. Eliminate third-party security software conflicts by disabling all anti-virus & firewalls.
    5. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
    6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    7. Try to restore from another known-good computer and network

  • Error 3014 after trying to update to 6.0.1

    Today i tried to update my iphone 5 to ios 6.0.1 and it just said error 3014 and then after a while of testing it said error (-1). and then (11) and now it says that it needs to be factory reset. Then i have tried to reset it like 10 times but it only say error 3014!

    You may have a hardware issue...
    Take a Visit to an Apple Store or AASP (Authorized Apple Service Provider) for evaluation...
    Be sure to make an appointment first...

  • IPhone 3GS frozen/rebooting after iOS 5 update.

    Hello all,
    I updated my iPhone 3GS to iOS 5 last night.  All seemed well until I noticed the restore was complete.  The iPhone was frozen on the Home Screen.  The flash of white the runs beneath the slide to unlock is frozen at different intervals everytime the phone reboots itself.  I have tried restoring the phone multiple time.  I am unable to perform a hard reset because the phone's sleep button is nonfunctional.  When the phone decides to reboot itself, about every two minutes, I notice that for a split second it flashes to a gray screen with an iPhone in darker gray.  There are words all over the screen but I am unable to read any of it before te phone resets.  I think I see a "Peparing to Install" title on the screen, but that is a guess.  Any ideas from anyone?  I'm really at a loss of what to do.

    An update on my problem above.  I too restored my software but all it got me was losing all of my ZombieLife progress, LOL.
    It seems to me that my phone freezes/reboots when it is trying to grab a signal for an update.  It has happened to me several times on the initial visit to a website on Safari and also on Nike GPS.  I can still see the page I was on in the background a bit but there is no recovering the phone.  I have to then hold down the lock button to restart it and sometimes that will not work unless it is on a charger. 
    Today my battery went from around 70% to the phone saying it needed to be charged in the span of a few minutes.  When I did get it on the charger in my car it went back to 66% after rebooting.
    I don't know if it means much but I have AppToolKit Lite and in the System Monitor it shows you memory usage.  At the moment out of 254.23MB I have 120M Active and the only I am running is the app.  Wired is at 40M, Inactive is at 32.20M and Free is at 63.90.  This is after I double-clicked the home key and killed all other apps.  When there are apps active the Free memory is next to nothing.  Not sure if this is a cause but I hope there is a solution soon with 5.01!

  • I get this error code when trying to update from an older version of Firefox: The operation can't be completed because you don't have permission to access some of the items.

    While trying to upgrade from a previous version of Firefox, I get this error code: "The operation can’t be completed because you don’t have permission to access some of the items."
    == installing ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

Maybe you are looking for