IPhone 3GS gets error when syncing after installing ios6

I just updated my iPhone 3GS to ios6, and it appears to have added a ton of Gigs to the phone. I've been trying to take apps and other things off the phone, but I'm still over my limit. And, after several syncs, I got the following error message:
The iPhone "(name of my phone)" cannot be synced. An unknown error occurred (1156).
Anyone have a solution? I'm not eligible for an upgrade until next spring because the 4S I purchased last fall was stolen and never recovered. Right after I left the store. Sigh. So I'm stuck with this one for now. Any help is greatly appreciated.

Restore your device as NEW (not from backup).  If that doesn't work, then you'll need to bring your phone to Apple for evaluation.

Similar Messages

  • I keep getting error when in the install mode in shared technology

    Getting error when downloading and installing element 11 & premier 11 what can I do ?

    See this knowledge base document which has common failures including a section on shared thechnologies
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • Iphone 4s getting stuck when syncing...

    my iphone is getting stuck when trying to finish sync saying, "waiting for changes to be applied"
    anyone have this problem and how to fix?
    please.

    It's me again!
    I think I've located the problem (at least in my case). I use a ringtone program called iToner 2 and that is what's apparently causing a conflict and syncing issues with my iPhone. I installed my ringtones from iToner 2 and the sync issues re-occurred. After deleting my iToner 2 ringtones, I was able to sync again.
    My guess is that some application that you are using that works in some way with iTunes or your iPhone is what's causing the sync issues. I would suggest finding that particular application and not using it until it gets updated to work with iTunes 10.5 and iOS5.
    I hope this helps! Good Luck!

  • HT201210 my iphone 3gs was erased when trying to install latest update - how to fix?

    I was trying to install the lastest itunes update to my iphone 3gs and got an error message after software was loaded.  Now my phone is a blank screen with the apple logo and itunes does not recoginze my phone.   Any suggestions on how to fix this?

    Did you manage to fix the issue?
    I have exactly the same issue as described above : I installed the update 5.1.1 on my iphone 3GS and since then, I can not turn it on anymore. In Itunes, I get an error 37 when I am doing a restauration and it stops.
    This error has nothing to do with firewall : I tried to restore the phone on several computers, including in an Apple reseller and it did not work anywhere.
    I spent several hours on phone with the hotline from Apple which arrived to the conclusion that it is a hardware issue, but the phone was working perfectly fine until I installed this update!

  • Keep getting error 2 message after installing iTunes9

    When trying to install the new iTunes I keep getting this error message after installation:
    *Apple Application Support was not found.*
    *Apple Application Support is required to run iTunes, Please uninstall iTunes, then install iTunes again.*
    *Error 2*
    I don't know how to fix this. I have tried multiple times to uninstall and reinstall. I don't understand how to fix this problem. From previous posts, I can't figure out where to go on my computer.

    I too am having this exact same problem. Is it a coincidence that both of us have HP Pavillions'? Very interested in finding a solution.

  • Keep getting error when trying to instal Mavericks at the stage when computer is supposed to restart?

    Have tried to instal mavericks on a 2011 mac mini serveral times and keep getting a error when it gets to the reboot stage. Help needed thanks!

    Have you tried un-installing, then going to Apple Downloads (http://support.apple.com/downloads/) for download /installation of QT 7.6.2?
    Also - it wouldn't hurt to repair permissions before & after installation.

  • Iphone 3gs getting error 2006 ?

    Hello,
    I have 16gb iphone 3gs stuck in reboot loop. When i put in recovery mod i want to restore getting error 2006 again and again .
    Please help me.

    Disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore:
    http://support.apple.com/kb/HT3964

  • IPhone and iPad error when syncing with itunes

    iTunes cannot sync my iPhone 4 or iPad air, iPhone produces unknown error (-50), and iPad produces unknown error (-54), cannot sync. This problem started in the past seven days. Neither device is Jailbroken, so I know that's not a cause, any help?

    I was having this problem and there isn't a lot out there about it. But it seems to have gone away with iOS 7.1, which is nice.

  • Getting error when attempting to install CS5.5 on Windows 7 64 bit

    Hi, I'm receiving the errors below when attempting to install Adobe CS5.5, but only for Adobe Acrobat and some other components of the suite.  I am now trying to install just Acrobat Pro through the Suite and it fails.  The error log is below.  Please let me know what the issue is.
    Thanks
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 3 error(s), 3 warning(s)
    WARNING: DS013: Payload {D8D2B468-8342-411A-8760-BCC362C3408F} CS5.5 Master Collection 5.5.0.0 is already installed and the session payload {D57FC112-312E-4D70-860F-2DB8FB6858F0} CS5.5 Master Collection 5.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    WARNING: DW066: OS requirements not met for {3EE734CB-F7AD-4691-9712-066E9FEC3E62}
    ERROR: DW020: Found payload conflicts and errors:
    ERROR: DW020:  - Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin to be installed.
    FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

    Run the cleaner tool and try again. Also uninstall any existing, more modern versions of Flash Palyer and Acrobat/ Adobe Reader on the system.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • I keep getting error code 0x80090318 after installing itunes.  I have tried everything on this computer.  Will not let me sync anything.  Please help!

    When I click on "iTunes store" I get the error code 0x80090318.  Also when I click on home sharing I get the error code -2146893032.
    This is the second time I have installed this and won't work.  Please help.
    I have Alienware / Windows 7 home ed. 64 bit.

    Hi luvthesuns,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are getting a few error codes. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    iTunes: Possible iTunes Store errors - Apple Support
    iTunes Store reporting error 0x80090318
    Apple software on Windows: May see performance issues and blank iTunes Store
    Troubleshooting Home Sharing - Apple Support
    Cheers,
    Mario

  • Iphone 3gs getting error code1603

    Error code 1603 appeared on the computer when the 3gs didn't reset and on trying restore to factory settings after the phone had advised me to connect to  the itunes. On connecting its already 3 hours the phone is showing only 1/8th satus bar and appears not to do anything further.How long does it normally take to restore? i am running iphone 4.3.3 on my 3gs 32 gb phone .Any help please.

    Try here.  iOS: Resolving update and restore alert messages including 1603

  • Jsp page getting error when opened after opening a form

    Hi,
    I have created an OA page, there is a link and a button in this page.
    Whenever I click on the link, a standard jsp page will be opened in a new window.
    When the button is clicked a standard form will be opened.
    But when I click the button, and then click on the link then an error page is getting displayed with 'Logged in user does not have permission to access this page.' message.
    Please help me on this.
    Thanks.

    But when I click the button, and then click on the link then an error page is getting displayed with 'Logged in user does not have permission to access this page.' message.
    Do you mean to say that the link works if you click on it without clicking on the button? The jsp you are talking about is a seeded one or a custom? --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • About JRE, I m getting Error when i m installing JRE

    Hello
    I have win98 and explorer 5 on my computer.I have java application which requires JRE and i donot have JRE so that i downloaded JRE manually and when i m going ot install JRE it is giving me error in the start and the error is,
    Unhandled Error
    Error number: 0x80070725
    Description : Incompatible version of RPC stub
    Setup will now terminate.
    Wat i should do please help me as soon as possible bcoz i have to run that applicationa dn i donot have jdk,sdk etc.
    the application which i m running is Win32 Executable file(exe) which has converted from a software EXECUTOR.
    Executor converts jar files into Win32 executable(exe) file.
    Executor demo version is available on net.
    Help me soon...
    Regards
    Kamil

    I am guessing that the item has installed some MS files that are incompatible with your version of Windows.
    Do a GOOGLE search for "Incompatible version of RPC stub" and
    check this MS Knowledge Base article:
    http://support.microsoft.com/default.aspx?scid=KB;EN-US;q321915&

  • HT4623 My iPhone 4 shows error when trying to install iOS 6

    My phone show a error message that it can't install iOS 6, why?

    Maybe try searching the forums for similar issues, specifically those with the exact error message that is being displayed and you'll get a resolution much faster.
    At the very least, post the actual error message that is displaying.

  • Should my 16GB White iPhone 3GS Get hot when using it?

    Got a White 16GB 3GS and been using it for a while, and it works great, no worries with it at all.
    But recently when i've been using it, its been getting really hot, and you can't really touch the back. Like this morning, i turned it on, snyc'd it with my Mac, then watched 15min of an Apple Keynote Podcast, and check twitter, and now its just sat playing music. And the back it really hot. And i've been using it for like 30min...
    Is this normal? What can i do about it?
    Simon

    Are you charging it while watching the podcast.
    Yes, they can get hot. But not hot to the point where you can not touch it. Of course, the other thing is your sensetivity to heat. Everyone has different tolerences. So it just kinda depends on what you think is too 'hot".
    playing just music shouldnt get hot. But multi-tasking could make it get hot.

Maybe you are looking for

  • Storing Shape Information IN a Table-Like Structure

    Hi All, I have a Program which displays shape (rectangle,oval,etc) in the panel which is enclosed in a frame.. shape can be dragged and dropped anywhere on panel... also one can delete shape... Now I Want To Store All The Exiting Shapes (as they are

  • Will not update my new website.

    I recently changed computers and I have no access to my old one. I rebuilt my website and when I published it, and it prompted me to visit, it took me to my web but did nothing to my site online, it is still the old one. When I press visit on my own,

  • Cisco891w-agn router

    Just got the 891 and I am unable to access the 'Internal Access Point Application'. I am assuming this application has the same look and feel as a 1230 ap through the browser. If I am in the Cisco CP Express application, choose wireless, towards the

  • EMail Crystal Layout as a Sequence

    Hi all, Is there a way of Automatically emailing a Crystal Layout / doc (eg: AR Invoice) when printing it?  I see a Print Sequance Tab in the Report and Layout Manager and I want to have an eMail sent as part of the Sequance. Thanks.

  • How do I find out my contract expiration date(s) via My Verizon

    Can someone please tell me how to navigate to the pages that show me my actual contract expiration dates?