Iphone 3gs getting  slower every day

my iPhone 3gs is freezing up and lagging (when I type mostly)  I have the updated ISO on in and I freed up some room in the memory, so what else could it be and how can I make it run faster like it used to?
also if I do a recovery on it and set it back to factory settings would it help or hurt? and what is the best way to do the reset? are there any step by step instructions for this anywhere?
thanks.

My Maxx started slowing down, actually hanging 5 to 15 seconds at times, after the last build 9.8.20-72_VZW-16-5.  I've had Droid 4.1.2 before this with no slow downs.  I've cleared cache, apps, checked memory, etc.  I haven't tried factory default yet because I expect I will loose much of the configuration info and it's a long process to set up again, much like getting a new phone.
Has anyone found the core problem? 
Suspect it may be that the latest VZW build contains additional data mining called "Relevant Mobile Advertising Program Enhancement" which collects data for directed advertising.  I opted out of this on the "privacy choices page" and will see if this helps.

Similar Messages

  • I wanted to know if iphone 3gs gets slow after updating to ios5?

    I wanted to know if iphone 3gs gets slow after updating to ios5?..and what features are missing for 3gs

    I have iphone3gs just upgraded to iOS5 just now.
    So far i am not experiencing any slow down because of the new iOS.. Rather i feel like its slightly faster than the previous version (4.3.5)..
    One of the first thing i want to try was the location based reminders.. After upgrade i coudn't find the option, and went trough the user manual to find out that it is not available for 3gs..:(

  • Why is my iPhone 3gs getting slower?

    I have an iPhone 3GS 32GB, and it is about 2/3 filled with music, photos, contacts, apps, etc.
    In the last few months the device has been getting slower - examples are:
    - keyboard strokes take up to 2 seconds until they are reflected on the UI.
    - screen swap by 90 degrees takes up to 4 seconds to be made.
    - opening the iphone settings menu shows an empty grey screen for 3 seconds, and then the menu icons start to appear.
    it's a hassle.
    any help out of this?
    thanks!

    Restore iPhone as New. Allow iTunes to Back up your iPhone when you begin. But Restore iPhone as New. Then after iTunes is completely done. You can go back later and put your contacts and everything back by Restoring From Backup.

  • I've tried everything I can possibly think of to improve my computer's performance, and it seems to be getting slower every day.

    Before I begin, let me post my system specs real quick:
    Hardware Overview:
      Model Name: MacBook
      Model Identifier: MacBook5,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 3 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: MB51.007D.B03
      SMC Version (system): 1.32f8
      Serial Number (system): W8******1B0
      Hardware UUID: 90146DFB-93C5-5699-AB59-05403BEC071C
      Sudden Motion Sensor:
      State: Enabled
    Storage:
      Available: 61.79 GB (61,793,218,560 bytes)
      Capacity: 255.2 GB (255,200,755,712 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: 2DA6DBEC-85AD-3415-81FA-B6979712E3E5
      Physical Drive:
      Media Name: V4-CT256V4SSD2 Media
      Medium Type: SSD
      Protocol: SATA
      Internal: Yes
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. Status: Verified
    So, a while ago I decided to get a SSD and upgrade to 4GB of RAM when I was still using Snow Leopard. Great investment, totally worth it. Well, for a while. Boot times were good at first. But they got sluggish. So of course I decided to upgrade to Mountain Lion because that would speed up my mac, right? Wrong. It takes my computer ten seconds from the time I push the power button to respond and begin booting. It takes anywhere from one to two and a half minutes to get to the login screen. On the login screen it won't respond to any input from keyboard, trackpad, or mouse for ten seconds more. When I type in my password, it's another thirty seconds to a minute before the spinning beach ball of death disappears and what should be my desktop appears. Instead I'm greeted by my desktop picture and nothing else. One to one and a half minutes later, my desktop, dock, and menu bar are all there in front of me. But we're not out of the woods yet. It takes about two or three more minutes before my computer becomes even remotely usable- if I just start clicking I'll get the beach ball of death and have to wait longer, watching my once-swift Google Chrome browser bounce endlessly up and down, never opening.
    TL;DR: It takes way too long for my computer to start up given its specifications.
    You might be poised at your keyboard right now, telling me to repair disk permissions, clear caches, reset PRAM and SMC, etc... but I've already done that. I have about 75GB free space on my solid state drive, so that's not an issue. I've used Onyx and CleanMyMac2 to clean up anything that could be causing the problem, and it hasn't fixed slow boot times and general sluggishness.
    I've scoured the forums far and wide to find the answer that will transform my computer into the speed-demon it once was. That is why I have turned to you, dear internet, to aid me in my quest.
    I'm not a digital dummy- I can follow just about any advice you give me if you're clear enough in explaining steps required. The OP in almost every thread I've visited thus far was clueless and simply needed routine maintenace or a hardware upgrade to fix the problem, and I know that can't be the issue... so what can?
    (PS I did select the SSD as my startup disk after installing it)
    <Edited By Host>

    Here's the results of etrecheck:
    Hardware Information:
              MacBook (13-inch, Aluminum, Late 2008)
              MacBook - model: MacBook5,1
              1 2 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
    Startup Items:
              360ControlDaemon - Path: /Library/StartupItems/360ControlDaemon
              ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
    System Software:
              OS X 10.8.4 (12E55) - Uptime: 0 days 1:39:57
    Disk Information:
              V4-CT256V4SSD2 disk0 : (256.06 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Ben's New Hard Drive (disk0s2) /: 255.2 GB (61.63 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS21N 
    USB Information:
              Apple Inc. Built-in iSight
              Apple, Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Logitech Logitech Cordless RumblePad 2
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.orderedbytes.driver.CMUSBDevices          (4.4.3)
              com.orderedbytes.driver.ControllerMateFamily          (4.4.3)
              com.Cvnt.nke          (2.1.2)
              com.Cvnt.driver.CvntDriver          (2.1.2)
              com.vara.driver.VaraAudio          (1.0.3)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.Cvnt.daemon.plist
              [loaded] com.macpaw.CleanMyMac2.Agent.plist
              [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
              [loaded] com.Cvnt.start.plist
              [loaded] com.hp.devicemonitor.plist
              [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
              [loaded] com.google.keystone.agent.plist
              [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
              [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              Covenant Eyes
              Caffeine
              HP Scheduler
    3rd Party Preference Panes:
              Flash Player
              GamePadCompanionPrefPanel
              Perian
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              DirectorShockwave.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              Google Earth Web Plug-in.plugin
    Bad Fonts:
              None
    Top Processes by CPU:
                   7%          HP Device Monitor
                   7%          WindowServer
                   3%          Google Chrome
                   2%          EtreCheck
                   0%          mds
                   0%          Dock
                   0%          fontd
                   0%          ps
                   0%          blued
                   0%          SystemUIServer
    Top Processes by Memory:
              135 MB             Google Chrome
              106 MB             mds
              57 MB              HP Device Monitor
              45 MB              WindowServer
              44 MB              Google Chrome Helper
              33 MB              coreservicesd
              29 MB              CalendarAgent
              29 MB              SystemUIServer
              29 MB              Finder
              29 MB              Dock
    Virtual Memory Statistics
              1.89 GB            Free RAM
              1.15 GB            Active RAM
              230 MB             Inactive RAM
              486 MB             Wired RAM
              793 MB             Page-ins
              0 B                Page-outs

  • Speed getting lower every day since adsl2+ upgrade

    Background : My router has always from day 1 been switched off at 11pm at night and turned back on at 7am in the morning. With adsl max I consistently had a download speed of 850Kb/s
    2 weeks ago my line was upgraded after a phone call to BT, initially everything was great, speeds were not much better for the first coupld of days (950Kb/s) but then shot up to 1250Kb/s for a few days. Since then however my line has been getting slower every day. Today is the worst and I am now getting 690Kb/s.
    I know I'm going to get the usual "leave router connected for 3 day" answer of someone, but what does this achieve ? If my line says connected at 6.5Mbps and I leave it on for 3 days solid does that mean 3 days of being stuck at that speed or does the line recalculate connection speed at certain intervals ?
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:18:41
    Downstream:
    6.5 Mbps
    Upstream:
    1.11 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    7.3 dB / 6.0 dB
    Line attenuation (Down/Up):
    28.6 dB / 17.8 dB
    Output power (Down/Up):
    19.1 dBm / 12.4 dBm
    FEC Events (Down/Up):
    181278 / 0
    CRC Events (Down/Up):
    0 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    0 / 0
    Thats my line stats as it stands , down from 11Mbps connection a week ago . Cannot connect to the main socket as where the line comes in the house is just a blank faceplate with a cable coming out the bottom into a smaller box then out and accross the room to the only phone socket in the property.
    At this rate I would have been better staying on my old package instead of being made to take out a new contract at less favourable terms.

    Nothing but a phone connected to the line. The sky box has never been connected to the line as last year when we got a Sky HD box slowed the connection right down.
    As for the router being on for the 10 days, no one ever said that to me. The only reason I know that turning it off daily could be a negative was through this forum.
    As for my original question. If I now leave the router on permanately does it reconfigure the connection istelf or does it have to be reset every now and then. Very frustrating going from 850Kb/s on adslmax to 1200+ then down to sub 700.
    I am unable to run a speed test at the moment , but with only the homehub connected to the master socket the results look like much the same , The hub seems to be connecting at bang on 6.5Mbs every time so I assume the line has been set to this by the DLM ? How long on ADSL 2 does it take to work its way back up ? I ran a speed test earlier today and I belive my IP profile was 5.85 or some such , why would it be set so low when the line was happy at 10+ last week ?
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:03:17
    Downstream:
    6.5 Mbps
    Upstream:
    1.106 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    Unknown or no mode configured
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.9 dB / 5.9 dB
    Line attenuation (Down/Up):
    27.9 dB / 17.3 dB
    Output power (Down/Up):
    18.3 dBm / 12.4 dBm
    FEC Events (Down/Up):
    61 / 0
    CRC Events (Down/Up):
    0 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    0 / 0

  • I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

    I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

    Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
    Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

  • Having trouble with momentary delays while scrolling and typing, new problem that seems to be getting worse every day. Mouse?

    Having trouble with momentary delays while scrolling and typing.  It's a new problem that seems to be getting worse every day. Mouse? Internet connection? It's driving me nuts!

    Hi
    Did you find a solution ?
    I have the same problem on my iPhone 4

  • My iPhone 3GS keeps resetting every time I push the button at the bottom to turn

    My iPhone 3GS keep rebooting every time I try to turn on iPhone pushing button at the bottom of iPhone
    Now the iPhone will not do anything unless I plug charger into iPhone then it still try's to reboot and then turn off
    ANY HELP WOULD BE GREATLY APPRECIATED. THANKS AND HAVE A GREAT DAY
    SUMMEROG

    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414

  • MY IPHONE 3GS IS SLOW AFTER UPDATE TO 4.3.1 ANY SUGGESTIONS

    my iphone 3gs is slow after i update it to 4.3.1 any suggestions
    Thanks

    Valis Rhode wrote:
    This HAS to be a software problem because the fine folks at the local apple store (Vancouver) replaced the phone even though it was 35 days out of warranty (they're awesome -- didn't expect that).
    No, it doesn't have to be a software issue. If it were, I would expect the millions of other iPhone users, specifically 3GS users running iOS 4 to be experiencing the same problem. They simply are not experiencing the same issue.
    Valis Rhode wrote:
    4) Just for giggles, I've tried turning 3G off. If I do, I lose ALL service (cellular included)
    That would tend to indicate a hardware or network issue, most likely hardware. Have you ruled out the SIM card by replacing it?
    Valis Rhode wrote:
    As I say, this behavior is identical across both my old phone and its replacement. In fact, for both issues (batttery & call-failed), it's as though the replacement was never made.
    Did you restore from your backup? or set up as a new device?
    Valis Rhode wrote:
    BTW, when I got the new phone, it was loaded with a slightly older version of iOS. At the Apple Store expert's suggestion, I upgrade to iOS 4.3.1 BEFORE i loaded my backup.
    Did you try using the device for a day or say as "new" before restoring your backup? It's very likely that the issue is simply a corrupted setting in your backup.

  • My iPhone 3gs stopped working 2 days before warranty period,now even warranty period is expired I need replacement

    My iPhone 3gs stopped working 2 days before warranty period,But i was unable to contact apple immediately as no apple store is available near my place,Now i need to replace my iphone..How can i get it?

    Pay for an out of Warranty replacement.
    It was your decision to not contact Apple before the warranty period expired.

  • Background job getting failed every day

    Hi,
    This background job getting failed every day.But this job was running fine initial periord.Please help me out this issue.
    SAP_REORG_UPDATERECORDS
    SAP_WP_CACHE_RELOAD_FULL
    SLCA_LCK_SYNCHOWNERS
    Regards
    Naanas.

    If this is R/3, then none of the above jobs should exist in the system, if scheduled by default with other standard jobs, then these should be removed
    Note 1034532 - Changes for standard jobs
    Note 931436 - SLCA_LCK_SYNCHOWNERS standard job terminates

  • HT4623 iphone 3gs shuting down  every time

    my iphone 3gs shuting down every time  even the battery is full

    did you find a solution?
    i am having the same problem. However, if i plug the power cable in, i am able to use it. However, if i remove the power cable, it switches off.

  • An old report gets reprinted every day

    Hello all,
    We have an application that based on Oracle Reports and Forms.
    Now, one of the old reports, originally printed 6 months ago, gets reprinted every day.
    We don't have any ideas why. No one on purpose does it
    I was wondering if any of you have experienced the same issue.
    Thank you, Sonya

    By report you very likely mean report output, or report result?
    If so, looks like the report has been scheduled to run every day, and the start date was set 6 month ahead. Someone's error, or something. See your application manual on how to schedule / unschedule / view scheduled reports.

  • Since downloading firefox my computer has been getting infected every day

    Have had this laptop since December 2010. Never had any problem with infiltrations. Everyone said Firefox was better than Internet Explorer. Don't know if it is a coincidence but since I started using Firefox, my computer has been getting infected every day. Have ESET Smart Security 4 and it will clean some of the files but shows error when cleaning others. Is there something I can do?

    ''C:\ProgramData\Java\VerifierNotifier.dll and the threat says a variant of Win32/Kryptik.TGTtrojan (two of these) and one C:\Users\All Users\JavaVerifierNotifier.dll and a variant of Win32Kryptik.TGT.trojan''
    I'm not familiar with those. Can you try a supplemental scanner/cleaner for a second opinion and possible better luck with removal? These two tools are highly regarded:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
    SUPERAntiSpyware : http://www.superantispyware.com/

  • Satellite A500 getting hot every day

    Hi,
    my Satellite A500 getting hot every day and shut down every second day.
    Where is the vault and what can i do?
    Greeting
    Schaumi

    Hi
    Try to clean the cooling ventilators using a compressed air spray.
    Dust and debris inside the fans might prevent the air from circulation which leads to higher temperature.
    You should also use the Toshiba graphic card drivers instead of any other drivers from any 3rd party pages. The drivers from Toshiba page contains an GPU overheating protection which other drivers dont.

Maybe you are looking for

  • Photos with numbers and titles.

    I have transferred folders of photos from my PC to my iPad and found that the order of the images the Album has changed despite the fact that they were numbered in the original file folder.   Also on iPad Albums they loose any titles. What I would re

  • Configure : add prefix and remove prefix

    Hello. I have 4 pods in our voip netowrk. Each pod have owner PBX system. But they have complex dial plan. So I have to configure as simple as possible. Thus, I have good idea to resolve. In my opinion, I'm gonna give prefix number both of them. Pod-

  • IPod touch duplicates songs after updates

    My I-pod touch duplicates some (not all) songs after every IOS update. The only way I've found to correct this is to restore my I-pod and then synch everything again; very annoying and time-consuming. This occurs even after turing off I-Cloud Match.

  • Adobe Reader 10.1

    After installing the Adobe Reader 10.1 on a WIN XP SP3 box and restoring the computer to an earlier time; the Adobe Reader 10.1 will not launch- see the program begin then just disappears, same thing when opening pdf file. Using add/remove programs -

  • My Macbook pro didn't come with any restore disks, How can I make some?

    I was just curious, Macs and Macbooks used to include restore disks. My new Macbook Pro did not come with any so how do I create a set?