Iphone 3gs got frost and its not doing anything?

iphone 3gs got frost doing nothing symbol apple is boken

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

Similar Messages

  • I came home and i came home and my iphone is now frozzen on the applmy iphone is now frozzen on the apple screen and it hasnt been doing anything i put it in the charger and its not doing anything how do i get it to work so i can  text and call and stuff

    i came home and my iphone is now frozzen on the apple screen and it hasnt been doing anything i put it in the charger and its not doing anything how do i get it to work so i can  text and call and stuff

    I got to that page but clicking on the Subscribe Free had no effect.
    Nothing showed in the Podcasts nor the iTunes U.
    In fact I also subscribed to Stanford's lectures and despite actually managing to DL them there is still no subscription in iTunes U, just the Intro to Computer Science belatedly.
    Peter
    I'd like to attach the screen grab of the out of order and randomly DLed selection of Harvard's course, but the forum won't let me attach it even though it is only 456k. Correction, close post and retry and now it lets me. NB how intermittent the DLs are and in no particular order.

  • What does the usb pointing to itunes symble mean. i have reset and it will not do anything but shoe that on the screen. I have it plugged in to itunes and its not doing anything?

    What does the usb pointing to the itunes symble mean? its frozen on that screen, i plugged it in to itunes but its not doing anything

    Hello crysta33,
    Thanks for using Apple Support Communities.
    The screen with an iTunes logo and cord indicates the device is in recovery mode, and will need to be restored by using iTunes.  Take a look at the articles below for more information.
    If you can't update or restore your iPhone, iPad, or iPod touch
    Use iTunes to restore your iOS device to factory settings
    Take care,
    Alex H.

  • My iPad 4 is stuck on the connect to iTunes screen.  Have held the home button down while connecting the USB cable to the iPad and its not doing anything, not even showing up under my computer Please Help

    IiPad is stuck in the iTunes connect screen.  I have held the home button down while plugging the iPad in and still nothing.  Hard reset isn't even doing anything.  It's not even showing up under my computer.  Please Help

    Did you get a message that the iPad is disabled?
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT3576 i have the ipod touch 4 generation and im trying to update my ipod to the IOS 6 and it rturned off and now it has on the screen an thing taht says connect to itunes and its not doing anything eles what do i do ?

    i have a ipod touch and im trying to update it to the ios 6 and its turned off and its saying connect to itunes

    What happens when you connect the iPod to your computer and restore via iTunes?
    iTunes: Restoring iOS software

  • HT203548 I'm having problems with Siri on my iPhone 6.  It worked briefly yesterday and now its not doing anything.  I have turned phone off and on and made sure everything is on in settings.  Please help!

    I'm having problems with Siri on my iPhone 6.  It worked briefly yesterday and now its not doing anything.  I have turned phone off and on and made sure everything is on in settings.  Please help!

    Do you have an active data connection (wifi or cellular)? Have you tried resetting the phone by pressing and holding the Home and power buttons until the apple appears (this is different than just turning it off and back on).

  • I just got a new docking system so i plugged it in and put in my ipod, then straight away my screen went white and now its not doing anything! please help!!

    ! just got a new docking system so i plugged it in to my computer because it wasnt the wall charge type, so I put in my ipod, then straight away my screen went white and now its not doing anything! i press the home and lock button nothing happens... then i plug it in my computer it doesnt come up in itunes or even the copmuter. please help i can not live with out my ipod!

    Your post is abit confusing, especially on getting those weird messages and emails,( assumed in your Windows machine.)
    Most likely you have Restored the iPod using the new Macbook pro, using the same name as that in your Windows machine, hence the duplicate name warning, as it is trying to sync Automatically.
    If you are syncing your iPod to both the Mac and Windows, you must set it to Manually Manage Music, in the first machine that you setup iTunes with the iPod. Read thsi Apple Support Article
    In iTunes, Preference, tick on Prevent devices syncing automatically
    Hopefully your music are still in both your iTunes library,
    Connect the iPod to the Mac
    Restore it (just to fix any filesystem corruption by the Windows end)
    Set it to Manually Manage Music
    Sync your selected songs in your library.
    Whern sync complete, Eject it
    Connect it to your Windows PC.
    Select the song in the library
    Sync it.
    It should work if your ipod Hardisk is not giving any problem.
    Good luck!

  • I dropped my iphone 5S in water and its not working.  Any suggestions?

    I dropped my iphone 5S in water and its not working.  Any suggestions?

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • Hi my iphone 3gs wifi, bluetooth and imei not working

    hi my iphone 3gs wifi, bluetooth and imei not working

    Do you have modified software installed on your device?
    If not, try to set it up as new device, explained here, without using the latest backup afterwards, in case it is containing corrupt data.
    How to back up your data and set up as a new device
    If this does not help, you'll have to get it serviced, there might be a hardware problem.

  • HT4995 i lost my iphone 4 last night and its not reachable assuming someone took out the sim.. so can i or my network company track the iphone which is not reachable through assuming location services and find my phone apps are enabled?

    i lost my iphone 4 last night and its not reachable assuming someone took out the sim.. so can i or my network company track the iphone which is not reachable through assuming location services and find my phone apps are enabled?

    No. Find My Phone is the only way to locate any lost iPhone. However, this requires that Find My Phone be turned on/activated before the phone was lost, and the phone must have an Internet connection. If your phone is turned off, does not have an Internet connection, or has been restored, there is no way to locate it.

  • I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."

    I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."
    Earlier i was able to use all application in this using IOS 5.0.1.
    I have format it and after that i am not able to use it.
    How to restore my itunes to 5.0.1???

    Well, welcome to the world of "hacked" phones. If your purchase was from the US, you obviously purchased an iPhone that is locked to a US carrier. The iPhone must have been jailbroken and unlocked via software to accommodate your foreign SIM card. Now that you have updated the phone, it is locked back to the US carrier. Only the carrier can authorize Apple to unlock the iPhone and none of the US carriers will unlock the iPhones. Best suggestion is to sell the phone and obtain a factory unlocked version directly from the Apple store.
    To answer your other question, there is not a supported method to downgrade iOS.

  • I lost my contacts on my 3gs and was not doing anything with the phone.. it was plugged into the wall charging

    I lost my contacts on my 3gs and was not doing anything with the phone.. it was plugged into the wall charging... can anyone help??

    cannect it to a computer and let it sync through iTunes. Contacts are a broad problem. You need to state where your contacts are located i.e. do you use yahoo mail? do you sync to iCloud? there are alot of answers for you problem but you need to be a little more detailed

  • My new Iphone 4s went black, and will not do anything. It was never dropped or anything like that. Any ideas?

    My iphone 4S went black and will not do anything. It was in my hand when it happened. It is 14 days hold, and has not had nay other problems. Anyone know whats up?

    Is the phone charged? Did you try connecting it to a charger? Try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release, ignoring the slide to power off screen if it appears. This will restart the phone and will not have any affect on your data. See if that takes care of it.

  • My iphone 5s is disabled and its not connecting to itunes

    hey,my 5s is disabled and its not connecting to itunes and its not taking my fingure print.what can i do now plz help me out.

    http://support.apple.com/kb/HT1212

  • My children got a ipod touch and keept changing there password and now it says ipod disabled connect to itunes but its not doing anything please help

    i got my kids a ipod touch for xmas and they keeped changeing the password on it and now its saying ipod disabled connect to itunes but its not working still please help

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • Loyalty Management - Redemption Process

    Dear Experts, I'm a bit confused with the Loyalty Management redemption process with Partnership. Would appreciate if you could clear my thoughts. We have this process where currently, when a customer buys a product from a retail partner, the custome

  • Problem in Transport Request

    Hi All, I am trying to transport the contents of a Z table from one client to another client using sm31 transaction. When i tried to do this, i am getting the problem like "Transport is not possible for the specified data". the table type is: Master

  • Ipod mini coming on automatically

    This is going to sound really weird, but my iPod mini comes on by itself. After I turn it off, even if I put the hold button on, it will come on later and drain the battery all the way down. The next time I go to use it it will be completely dead. I

  • XMLType payload fails with oci8 driver  when doing getStringVal

    I have a queue with an XMLType payload (I'm using 9.2). When I try to do a getStringVal() or getClobVal() on the dequeued XMLTYpe payload it works fine with the thin driver but when I switch to oci8 I get the following - ORA-21608: duration is invali

  • Can data transfer from SAP4.7 version to ECC6.0?

    Hello ABAPers,                        I want to know is it possible to transfer the data from 4.7version to ECC6.0. I want to transfer the Data of a table which is there in ECC6,0 to SAP4.7. I am following the steps given in http://www.**************