IPhone 3gs is froze with image of itunes and usb cable? Any suggestions?

My IPhone is frozen with the screen showing the Itunes logo and an usb cable?  Any suggestions?

See: http://support.apple.com/kb/HT1808

Similar Messages

  • Whenever I try to sync my iPhone 3Gs it always fails, saying the device timed out. Any suggestions with what to do??

    Whenever I try to sync my iPhone 3Gs it always fails, saying the device timed out. Any suggestions with what to do??

    Did you recently restore or update your iPhone?

  • Iphone 3gs need activation after update by itune and no service

    iphone 3gs need activation after update by itune and no service
    what can i do ?

    No need to Multiple post... see your other Thread...
    https://discussions.apple.com/thread/5846382?tstart=0

  • My iphone is in recovery mode, the itunes and usb cable symble, is all data lost at this point or is it possible to recover some or all data on the phone?

    My iphone is in recovery mode, the itunes and usb cable symble displayed, does this mean that all data is lost or is there some way to recover the data on the phone.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here http://support.apple.com/kb/HT1808

  • Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

    Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

    Do as the image suggests, connect the device to a computer running iTunes.
    If it is still not working, try posting in your native language.

  • What do you do if your iphone 3gs displays a tether picture to itunes and won't change? After going throught the manual i came up with a error message1002

    What do you do if your iphone 3gs displays a thether picture to itunes? It won't change and after going to the manual and following directions, I find it is an error 1002. What does this mean?

    Error 1002, 1011, 1012, 1014: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue.

  • I have an iPhone which froze during software update to a picture of iTunes and USB cable.  I have never loaded this device on my computer.  How do I unlock the phone?

    My iPhone froze while downloading a new update.  The screen now shows a picture of iTunes icon and USB cable.  How do I unlock the phone if I never registered the device on a computer?

    Have you tried to restore the iPad back to factory settings from within the Setting App?  You might also try and hard "reset" by holding the power button and the home button at the same time until the iPad 2 restarts.
    Besides that, find a friend with a computer and try to update it from their comptuer, or if it is close and convenient go to the Apple Store and they will be able to help you.

  • Help mon iphone 5s met met un image de itune et le cable depuis je n sais plus rien faire avec.

    bonjour ,
    mon iphone 5s ne s'allume plus. Ce que je voie a l'écran c l 'image de itunes et du cable, apres il me demande une mise a jour et une restauration mais elle ne se fait pas

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, follow the steps in this article to connect in recovery mode and restore:
    If you can't update or restore your iOS device
    Remember, that this will install the latest software on your phone, 8.1.2

  • Iphone 3gs had screen with itunes and usb cable. tried to do a restore, said it cannot be restored, unknown error occured: error code 1013. I've tried several times, no luck.

    I read on several sites where you go to windows/system32/drivers/etc/hosts and delete gs_apple.com or something like that. I went there, there is no such file or anything with apple in it.
    Any suggestions?

    Click 1013 on that page  --->  iOS: Resolving update and restore alert messages

  • TS1363 iphone locked on itunes screen with picture of itunes and usb plug

    iphone locked on sreen showing itunes logo and a usb plug with an arrow need to fix

    The device is in recovery mode.  Do as the image suggests and connect the device to a computer running iTunes and restore.  Why is this so difficult to figure out?

  • Iphone 3GS just updated with 4.0.1 and nothing works on 3G!!!

    I just updated my Iphone 3GS to the new software 4.0.1 and it was working fine with my wireless service at home, but when I get out, nothing works, I tryed to open the internet, nothing, tryed to open youtube, nothing, nothing that requires internet service was working, I can only use the phone and text, I called ATT and talked to iphone support and she told me to go the setting and did bunch of stuff, turn off the 3G, delete cookies, restore setting, etc, nothing worked to get me connectec to the internet, she told me then that I have to restore the phone and download the software again, I did it last night and today, same is happening, I can not get internet connection, I am getting really frustraring with this new crapy software 4.0.1, WHAT IS GOING ON!!!!!

    Many people have been having reception/connection issues after the 4.0.1 update. Just search these forums and you will see. In the update Apple in their ultimate wisdom used a new algorithm to display the way the bars are displayed on the iPhone, mainly for the new iPhone 4, but it seems to be having a drastic effect on 3G and 3GS users. They say it should have no effect on actual reception as what you see now is what it actually was the whole time but only displayed differently but many are having serious issues. My friend updated and where she used to have 1 to 2 bars in her house and had no problem making calls she now has No Service.
    I myself didn't update to 4.0.1 and won't until they get this sorted out.
    Not sure why your having a problem only with internet connection, but like I said search these forums and you will hopefully find an answer.
    Good Luck

  • Charging iPhone 3GS in Sweden with adapter that has integrated USB ports

    I'll be traveling to Sweden in a few weeks, and I found an adapter that has two integrated USB ports. Both my husband and I have iPhones, 3GS models. If we get this adapter, can we use the USB ports on it to charge our iPhones in Sweden? It doesn't convert voltage.
    http://tinyurl.com/25brqp8
    Message was edited by: jadzzia

    Please excuse me if I write something you already know, but, based on your last message that you are worried because you adapter "doesn't convert voltage," I'll give it a shot anyway.
    The voltage that is supplied to your wall outlet is alternating current (AC). In the US and Canada this is 120 volts AC. In Europe - and in many countries around the world - it is 220 volts AC.
    A USB port on a computer, or an equivalent USB outlet on an adapter, supplies between 4.75 volts and 5.25 volts direct current (DC). The same kind of power that is supplied by a battery.
    The adapter that you mention, that has two USB ports available, DOES convert the voltage from 120 volts AC (or 220 volts AC) to approximately 5 volts DC.
    As I mentioned in my first reply, if the adapter can be used for voltages from 110 volts AC to 220 volts AC you will not have any problems in Europe. All that you need to do is to plug it in the wall socket in Sweden and then plug your iPhones into the adapter via the regular sync/power cable that you use all the time. If your adapter is not "universal" - that is, it doesn't have all the plug adapters for European countries you can pick one up online or at a Radio Shack (or similar store) or even at most airport stores. Do a Google search for "Sweden, power outlets" and you can see what the outlets look like.
    Good luck,
    Mike

  • I was updating software i06 and plugged in my iphone to computer but then a error came up and I unplugged my iphone know it wont leave the the itunes and USB plug in on my iphone

    I was updating my iphone 5 for know software and when I plugged in my iphone everything was fine. Then a error came up and I unplugged my iphone. Know my phone froze with the screen showing itunes plug in with USB cord. I cant get it off that image and I don't know what to do

    Hello there Stmalo23,
    I would recommend reseting the iPhone using this procedure.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting http://support.apple.com/kb/ht1430
    When the reset is done the phone will return to recovery mode. Here is some info about recovery mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808.
    All the very best,
    Sterling

  • I am unable to update either iTunes or iPhone or iPad or ipad2.  After timing out I am instructed to check network setting and ensure connection is active. Connection is ok, all other downloads work ok as does iTunes and sync.  Any suggestions?

    I am unable to update software for iTunes, iPhone, iPad, or iPad 2. Installation times out and recommends I check network settings and the connection is active. It is   There are no problems with other downloads/installs. iTunes, sync and devices work fine otherwise. Any suggestions?

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than Network connectivity tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Maybe you are looking for

  • MBP for video. Thoughts?

    I'm buying a new MBP this week and having a bit of trouble deciding which configuration. Any help would be fantastic. I plan on using this for light video editing with Final Cut Studio 2 and encoding as WMV files. My budget will only allow for a 15"

  • How to test Scenario with AS2 adapter..!!!Very Very Urgent..!!

    Hi All, We have provided the partner details like AS2ID,URL,Port and certificates. They ask me to do some sample testing whether files are reaching to partner system or not. I done all the required steps in IR and ID... 1. Can anyone suggest me how t

  • How to delete photo in iPhoto

    I triede to delete photos and put them in the trash.  But nothing happened to them.

  • Can't export zxp file with Flash Builder, CSExtensionBuilder

    Dear all I write Create Suite Extension project. I build this project success. It's output swf file. I want to export to .zxp file to connect with IA Plugin. In my Project. I do these steps: 1. Select Export => Adoble Creative Suite Extension Builder

  • How to get a current date timestamp ?

    Hi, I need to get the current date timestamp in a format DDMMYY HH:MM:SS.mmmm and store it in an Oracle column which is declared as of type DATE. Also i need to store this timestamp in a string format. Please give your inputs in this regard, which is