IPhone 3GS is not connecting to my Mac. Charges in the wall fine but doesn't do anything when I plug it into my computer.
I bought this phone on ebay and it's still in great condition, charged up quickly, and seems to be working fine except for this one thing. I factory reset it and plugged it into my Mac and nothing happened. No charging sound - nothing. I contacted the seller and she mentioned that maybe it isn't compatible with a higher version of itunes since the phone hasn't been updated? That doesn't seem right but I would hate to think that I just wasted my money. Could it possibly be an internal problem? Any help would be much appreciated seeing as I don't have an Apple store anywhere near me.
Yes, I have the current version of itunes. I charge my ipod and digital camera with the same USB ports and I've never had a problem with them. Woops, when I said 'computer' I was just referring to my Mac again. Sorry for the confusion. But yes. I even tried using my ipod cord with it to no avail.
Similar Messages
-
I just got my iPhone unlocked in Pakistan. Now I want to insert another company's sim card in it, which is not supported of course. It is reading the sim card but shows no service. Plus I plugged it into itunes so that i could confirm it. But the phone number is n/a
Have you loaded the unlock onto your phone yet?
If yes: connect to iTunes to load the up-to-date carrier settings of your phone.
If that does not work navigate to settings>general> reset>reset network setting and confirm that.
If that does not work have your SIM replaced.
If no: backup your data, then navigate to settings>general> reset> reset contents and settings and confirm that your phone will be reset to factory settings. Then set it up again and load your backup. Now you have loaded the unlock.
If all of that does not help contact Apple to check if the carrier has really done the unlock. And if you have not doen an official unlock, but a jailbreak there is nothing I can do for you. -
Daughter forgets password to Ipod..trys it to many times and it says disabled connect to itunes. So I do so and it shows all the music and junk she has on the ipod but I dont know where or how to unlock the device to where we can use it again..Any iinfo greatly appreciated!!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
My iPhone 3Gs would not connect to Wi-Fi
Hello,
My iPhone 3Gs will not connect to Wi-Fi, it results in a message that states, "unable to join the network". The IP address, Subnet Mask, Router, and DNS is blank- which I am guessing the router do not give my iPhone a valid address anymore. When I first installed the router, it gave my iPhone an address and worked excellent with my other wireless items. My other wireless items still are connecting to the internet but not the iPhone.
I have tried:
- restarting the router (the firmware is updated)
- resetting my network settings on the iPhone
- turned my "Airplane Mode" on and off
- syncing the iPhone with my computer to factory settings (version iOS 5.0.1)
- I have tried changing the security to wep to wpa to wpa2
Thank YouHelp anyone
-
My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?
JHblues Let's get your data working again. There are not any reported issues in the area. Try this step: http://vz.to/1kUSSk2
Sheritah_vzw
Follow us on Twitter
@VZWSupport -
My iPhone 4s will not connect to my yahoo account following the recent update. It appears with Error 1032. I have tried deleting the account resetting my phone, changing the password - none of this has worked. Could you please provide me with some advice?
I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub. -
When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'authorizing this computer' in itunes. Can anyone help?
Is your iTunes up to date, it is now 10.7, click the iTunes button at the top of this page if you need the new version.
-
My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
I have an old iphone that I've replaced with a newer one :-) and I'd like to use the old one in the same way I do an itouch. When I plug it into my Mac laptop, there is no recognition of it as a device. Help! What do I do????
http://support.apple.com/kb/ht3406
-
My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.
Hope this helps:
http://www.apple.com/support/iphone/assistant/itunes/ -
i have an iphone lost the music somehow? then went onto itunes on the app it downloaded the music again, but doesnt play and i have to plug it into my laptop and its not my iphone and i cannot sync any of the music any help? the orginial compter now does not work any suggestions?
See Recover your iTunes library from your iPod or iOS device.
In brief; backup the device, recover what you can from it, download other purchases from the iTunes Store, restore the device, add content, keep a backup of your library in future.
tt2 -
Why is the iphone icon not appearing on my itunes when I plug it into my computer?
Why is the iphone icon not appearing on my itunes when I plug it into my computer? I am online, my itunes is up and running, my new phone is plugged in, and for whatever reason the iphone icon that is supposed to appear is not showing up after I plug my phone in.
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
So yeah...last night I was checking out my iPod (bored at the in-laws) and all of a sudden the screen went blank and the only thing I can get it to do is have the black screen w/ the white apple logo on it. It won't turn on, doesn't give the the option to power down, it won't charge, AND it's NOT being recognized when I plug it into my computer. Not by iTunes OR my computer. I've tried holding down the top button and the home button at the same time...nothing. And since it's not being recognized on my computer, I cannot restart it or go back to factory settings. Someone please help! I've had it for 18 months so the warranty is no longer valid and I don't know how to fix it. THANK YOU in advance!
- I would try placing the iPod in recovery mode and then see if iTunes will see the iPod. try both with the iPod not connected to the computer and with it connect. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next see if placing the the iPod in DFU mode will make it visible
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.
Maybe you are looking for
-
Hi All, The minimum BPM-wait duration is 1 min and cannot be decreased below that....can we use 0.5 for 1/2 min. or can any one suggest what would be alternate option to achieve 2 to 3 min delay. One solution is to write a mapping and use udf to del
-
Questions on normalizing thousands of audio tracks.
So I have a lot of audio tracks in my iTunes library. AAC, MP3, etc., Ripped from Vinyl, CD, mic. About 5,000 tracks. I am considering normalizing them through Soundbooth CS4. But, has anyone tried to process so many tracks? And what of the quality?
-
Problems downloading flash player
Recently, when going to watch videos online I am unable to do so as a pop up says flash player needs to be updated from the 15 that i have to the new 16. I tried to do this several times however on the page the download now button keeps on disappeari
-
SEO for iweb..... any suggestions
Having used iweb for a while now and hosting our site through mobileme, I am looking at optimising it and generating some search engine traffic. I have tried iweb Buddy with not much success and was hoping someone could help point me in the right dir
-
Using multiple displays in Aperture 3 and FCP X
Hi, I was looking around apples website and I noticed on the Thunderbolt Display page that they had aperature running with the picture fullscreen on one display and the photo library open on the other, I have 3 displays so I would like to do that. Do