IPhone 3Gs, Mac Pro Internet sharing via Airport connection problems

Hi, I have internet sharing turned on in my Mac Pro for the Airport connection and it works very well with laptops, but I have trouble getting my iphone 3gs to connect to it sometimes.
restarting the iphones does not help
stopping and starting the airport does not help
I can restart the Mac Pro, but that can be a pain, but does usually allow be to connect again for awhile...

I've been having the same problems as everyone else here. Trying to share internet connection from my ethernet wired iMac to my MacBook and my iPhone. Tried all the workarounds, but nothing works, or lasts very long.
Yesterday, I finally talked with AppleCare for over an hour. All their suggestions (trashing preferences, changing settings, etc.) failed, as well. The AppleCare person then put me on hold to speak to an engineer, who told her that Snow Leopard no longer supports Internet Sharing as of 10.6.1.
Not willing to accept that answer, I had them set up an appointment at the Apple Store Genius Bar for me, and after chatting with the Genius for a while, he also confirmed that Internet Sharing is no longer supported under Snow Leopard. Apparently, there were many hardware issues that the engineers decided to circumvent, and so did not include support for Internet Sharing with the internal airport in Macs. They said that the Airport it is intended to receive, not to send a signals! Yet, it worked fine, doing just that, under Tiger and Leopard! The only fix he could offer was to wipe my drive and take me back to 10.5, which I declined.
However both the guy at the Genius Bar and the lady at AppleCare inferred that Apple "may" release another update to fix this issue, if they get enough complaints and bug reports.
So, there you have it. Apple no longer officially supports Internet Sharing in Snow Leopard.

Similar Messages

Internet sharing via airport doesn´t work

Hello to everybody,
my problem is, when I do internet sharing via Airport on my imac (OSX 10.6.8) so I can use my ipad for surfing. The connection establishes for a short time and then it breaks down. Once in a while I can reconnect, but it´s constantly breaking.
I know, this problem is posted a million times, but it still seems not to be solved (or I didn´t find the right thread with the solution).
Bthw. I phoned the apple support. They wanted to charge € 49,--. Now I´m quite mad at apple. This *****. They are having a problem with their software and they want to charge me? That´s incredible. I can´t understand what´s the hype about apple. Such an awfull bad support they´re giving (or not giving at all).

OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

IPhone accessing Mac Pro's shared internet via Bluetooth

I have an iPhone 4 which is running without an ATT contract (no cellular) and acting like an iPod.
I can access the Internet using the wifi arrangements on the iPhone, and this works easily.
But I would like to turn off the wifi on the iPhone and configure the iPhone to access the Internet
via the shared internet service on my Mac pro, connecting via bluetooth.
I am starting to think this is not possible, and the tethering can only go the other way, That is to
say that the iPhone can share it's cellular net access with the Mac via personal hotspot, or possibly
using bluetooth PAN or some other bluetooth connection service.
I have tried creating PAN network interfaces on the Mac Pro, and then I go to the iPhone and set
up a paired connection between the iPhone and the Mac Pro. But I just can't seem to guess the
right set of settings so that the iPhone can use the Mac Pro's internet via the PAN service.
Does PAN service only serve the iPhone's internet to an external device (like a notebook), or can
it be used in the other direction to allow the iPhone to request IP packet service from the Mac Pro?
Thoughts?
Douglas Goodall
Santa Maria, CA

I've been having the same problems as everyone else here. Trying to share internet connection from my ethernet wired iMac to my MacBook and my iPhone. Tried all the workarounds, but nothing works, or lasts very long.
Yesterday, I finally talked with AppleCare for over an hour. All their suggestions (trashing preferences, changing settings, etc.) failed, as well. The AppleCare person then put me on hold to speak to an engineer, who told her that Snow Leopard no longer supports Internet Sharing as of 10.6.1.
Not willing to accept that answer, I had them set up an appointment at the Apple Store Genius Bar for me, and after chatting with the Genius for a while, he also confirmed that Internet Sharing is no longer supported under Snow Leopard. Apparently, there were many hardware issues that the engineers decided to circumvent, and so did not include support for Internet Sharing with the internal airport in Macs. They said that the Airport it is intended to receive, not to send a signals! Yet, it worked fine, doing just that, under Tiger and Leopard! The only fix he could offer was to wipe my drive and take me back to 10.5, which I declined.
However both the guy at the Genius Bar and the lady at AppleCare inferred that Apple "may" release another update to fix this issue, if they get enough complaints and bug reports.
So, there you have it. Apple no longer officially supports Internet Sharing in Snow Leopard.

Can't do Internet Sharing via Airport, laptop PC to iMac

Help! I'm trying to connect a Windows laptop to my Mac via AirPort to do Internet Sharing. I have Internet Sharing turned on and AirPort is on.
The laptop PC can see the Mac, but it has a red X and the following message:
"The settings saved on this computer for the network do not match the requirements of the network."

I'm finding, after working at it for a while, that "Frank's Computer" shows up as an ad hoc network on the laptop PC and the wireless connection is solid, but Internet Sharing still isn't working. Is there a distinction between ad hoc networks and Internet Sharing? Could it not be working because an ad hoc setting has been made and Airport can't do two things at once?

Internet sharing via airport woes

Hi,
apparantly an thunderstorm fried my ethernet-card in my MBP this morning. Now I am struggling to get internet-access via my iBook G3 which has DSL-boradband via ethernet (pPOE) (either via firewire or airport) but don't succeed:
1) file-sharing eithert via airport or ip over firewire works
2) I have set up my iBook to share internet via airport, enabled web sharing as HELP recommends.
Internet sharing nevertheless doesn't work for me: error message (in network-status) says (translated from German):
…Airport has self-assigned IP-Address and is maybe not able to connect to the internet.
I have used the built in settings, changed nithing manually. Any ideas?
Greetings,
Rolf
(rather desperate)
MBP C2D 2.33 GH, 160GB HD, 2GB Ram Mac OS X (10.4.9)
MBP C2D 2.33 GH, 160GB HD, 2GB Ram Mac OS X (10.4.9)

OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

Connecting my Powerbook to my iMac for internet sharing via airport

Thanks in advance for any help.
I have given up trying to get an answer to my Airport problem and NTL Virgin.
I now have my iMac connected to web via ethernet all okay for a week now so it can't be my connection that was the problem.
I need to connect my PowerBook to the internet now at the same time. I would obviously like to do this using wireless technology. I was hoping to web share my iMacs connection via the airport cards on both macs but seem to be struggling.
I can set up a new network on the iMac and get the PowerBook to see it but it won't connect to the internet.
Any advice would be great thanks

To setup for Internet Sharing (Wired to Wireless):
Setup the Network
Internet Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > PowerBook
Enable Software Firewall - iMac
System Preferences > Security > Firewall
o Block all incoming connections (enabled)
Enable Internet Sharing - iMac
System Preferences > Sharing
o Select "Internet Sharing" from the options in the left column
o Share your connection from: Built-in Ethernet
o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
AirPort Options...
o Network Name: <anything you want>
o Channel: Automatic
o Enable encryption (using WEP) (optional)
o Password: (optional)
o Confirm Password: (optional)
o WEP Key Length: (optional)
o Click OK
o Select "Internet Sharing" again
o Click "Start" to start Internet Sharing
o Click Start

Turning on Internet Sharing via Airport disrupts internet connection!

I have a very strange problem.
My iMac G5 (10.4.10) is connected to broadband via an Ethernet cable. Everything works perfectly, Google Earth works, emails come through, internet downloads are perfect...
BUT!!
When I turn on my Internet Sharing to share my Ethernet connection via my Airport connection (to let my husband surf the net on his PC) all **** breaks loose on my Mac.
Google Earth does not function properly, all internet downloads (.dmg) come up with "codec overrun errors", all images sent via email downloaded through Entourage are corrupted, the list is endless. I have to turn off my Internet Sharing, turn off Airport, and then everything returns to normal again.
Why is this, and can someone help stop the fights my Husband and I are having when it comes to sharing the Broadband connection through my Mac - I don't want to because my Mac goes crazy!
Ta muchly!!!

Sorry but an Ethernet hub will NOT properly share the ISP connection. The ISP only gives you a single IP address. If you use a hub (or Ethernet switch), the first computer you turn on will win and get the only IP address. The other computer will not be able to connect.
To properly share the connection, you need to get a router. The router uses the single public IP address provided by your ISP and creates multiple local IP addresses for your computers.

Internet shared via Airport Express - Speed control

Good morning all,
I am using an AirPort Express base station to share my internet connection between two computers. I have a cable modem connected to the AirPort Express, and both my iMac and my brother's PC connect wirelessly to the AirPort Express base station.
Now the problem is that the PC is using extensively the bandwidth, whereas the Mac cannot hardly browse the web. As I do not need a fast connection to the Mac all the time, but only in specific occasions, I would like to be able to control how much of the internet bandwith is used by each of the computers connected to the Airport Express base station.
I have checked the manual setup in the AirPort utility, but I cannot find this setting.
Does this exist? Can it be done?
(I know I can ban a specific computer from connecting to the network, but this is not what I want).
Thank you in advance for your help and assistance.

This feature is NOT available on any of Apple's base stations.

Mac book pro 13 (v8.1) airport connection problem snow leopard

Hi!
my MBP 13 (8.1). on Snow OS. It's 2 day old and I have a serious bug! It was working perfect until batery power down... now won't connect to ANY WIRELESS. I can't turn on and off the airport on my laptop!
My network is an airport extrem (7.5.2). I own an older MBP (1.1) work perfect! I changed all possible setting of the airport (rebust network, 5ghz, 2.4ghz, 801a/b/n, password/no password, default setup, reset, etc...) nothing work for the new laptop anymore, and i did restart, change airport setting, bla bla bal...!
I will try to reset the 2 tings talked over other threads (SCM and PRCAM or something like so...), but ****, it's brand new, don't feel like reset a 2 day old computer... I've been using mac over 20 years, profesionnaly, and now i'm getting despointment... and big time!
Thx!
Mr Uneasy

If it's not your hard drive and it's not your system that leaves either your user account or your connection. But that wouldn't account for trash error messages.
Have you tried repairing your usser account by
Booting up holding command-r keys into your Recovery Volume.
From the menu bar choose Utilities then select Terminal.
At the prompt type resetpassword
Press return
The Password reset utility will launch (do not reset password)
Instead, click your Mac hard drive.
Then from the drop-down select the user account you want to repair. At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac.
If it's not that then you need to go to System Preferences > Users & Groups and remove your Login Items and test. I know the problem is that it's intermittent but you'll need to run w/o them for a while or in a fresh test account to see.

IPhone - OSX 10.5.6 internet sharing via wifi has packet loss

I try to access the web on the iPhone (for testing purposes) via the bult-in internet sharing capability of my MacBookPro via WiFi. I get very slow connections and high packet loss on distances of less than a foot.
If I activate Internet sharing (eth0 - AirPort) I have packet loss of up to 80% on a Ping to the iPhone. This results in an unusable connection. In this case the iPhone gets a DHCP address from the DSL box (10.0.2.2). Pay attention to the HUGE standard deviation of the packets in case of the internet sharing!!
If anyone has config hints, I appreciate that very much. Does anyone know how to bridge en0 to Airport with WEP enabled?
Internet sharing activated:
--- 10.0.2.2 ping statistics ---
202 packets transmitted, 150 packets received, 25% packet loss
round-trip min/avg/max/stddev = 18.312/1768.538/8198.289/2201.202 ms
If I set up a Computer-Computer network with a WEP password I get no packet loss, but of course I cannot access the internet that way because there is no way in preferences to bridge the networks.
--- 169.254.246.154 ping statistics ---
443 packets transmitted, 442 packets received, 0% packet loss
round-trip min/avg/max/stddev = 1.441/1.983/57.068/2.691 ms
Internet Sharing (ifconfig):
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fe92:d74%en0 prefixlen 64 scopeid 0x4
inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:1b:63:92:0d:74
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1b:63:ff:fe:77:99:ac
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fec1:e75b%en1 prefixlen 64 scopeid 0x6
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255
ether 00:1b:63:c1:e7:5b
media: autoselect status: active
supported media: autoselect
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:00
media: autoselect status: active
supported media: autoselect
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:1c:42:00:00:01
media: autoselect status: active
supported media: autoselect
C-C Network:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fe92:d74%en0 prefixlen 64 scopeid 0x4
inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:1b:63:92:0d:74
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1b:63:ff:fe:77:99:ac
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fec1:e75b%en1 prefixlen 64 scopeid 0x6
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255
ether 00:1b:63:c1:e7:5b
media: autoselect status: active
supported media: autoselect
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:00
media: autoselect status: active
supported media: autoselect
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:1c:42:00:00:01
media: autoselect status: active
supported media: autoselect

I accidentally found a workaround:
1. Activate internet sharing
2. Goto network preferences and use AirPort: "Create network ..."
3. Check require Password and create a C2C network
4. The Airport Icon changes from the up-arrow to the computer icon
5. Connect with the iPhone.
Packet loss is gone and sharing works fine.
BIG BUG: Procedure has to be repeated every time AirPort is turned on/off, as Internet Sharing disables/resets the airport setup!

Internet sharing via dongle, how to set password for wifi network created?

I am using a USB dongle with my Mac book Pro to share internet through AirPort, so that i can access my mac book's wifi from my iphone. This works great, but it is an open network and I woud like to set up a password.
If anyone can point me in the direction I would be very grateful!
Thanks

If you are using OS X's Internet Sharing feature, then you can configure wireless security on your Mac's internal AirPort Card but are limited by the OS X version that you are using. It was not until Mountain Lion that Apple provided WPA2 security. Prior to this only WEP was available.
You configure Internet Sharing via System Preferences > Sharing > Internet Sharing. (I don't have 10.6.x on any of my Macs so this may be different for your case.) Once you configure what is shared, you can then add wireless encryption.

How to Internet sharing from AirPort throuhg Ethernet

Hi! How to Internet sharing from AirPort throuhg Ethernet?
In System Preferences -> Sharing -> Services not found checkbox for Bluetooth Share Internet
Internet is connected via airport
Mac os x 10.4.11 Server
Thanks!
Message was edited by: andrew_k

I've not set up a Bluetooth PAN; a Personal Area Network. Modems and keyboards and such, yes.
My usual approach here would be a WiFi USB widget, or an embedded WiFi card or a PCMCIA / PC Card or a CardBus WiFi or wired network adapter, or a wired Ethernet connection for the Windows Vista laptop.
This to connect from the Windows Vista laptop to the AirPort, or into a wireline Ethernet (if there is one). And from there to the Mac Mini server running Mac OS X or Mac OS X Server software.
As for the PAN, I don't know. I don't have Mac OS X Server running on a box with Bluetooth hardware, either.

Screen-Sharing and Internet-Sharing via same network connection

Hello out there,
I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
Can somebody tell me what's going wrong and how to solve it?
Greetings from good old Germany
Ansgar

Hello out there,
I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
Can somebody tell me what's going wrong and how to solve it?
Greetings from good old Germany
Ansgar

Custom icon on a disk shared via Airport Extreme

I have a USB hard drive that I am sharing via an airport extreme. In the finder, under "Shared" I see my airport extreme. When I click on that, I see my external drive. I would like to change the icon for that, but the standard Get Info -> paste doesn't seem to work.
I've tried to set a custom icon on a test folder on my hard drive and it works. I also tried it on a test folder on the USB drive shared via airport extreme, and that worked. But I can't set the icon for the drive itself. Any suggestions?

No, they pulled it, even though Steve promised the wireless backup feature in his latest keynote. One hour into it to be exact.
http://events.apple.com.edgesuite.net/d7625zs/event/
Now, I am very much against releasing a product before its ready, so I respect them for that. However Steve VERY clearly states that it was already working and would release with Leopard. He usually makes a very very clear distinction between things they "can/might" do and things that are working. He even goes into detail about how all the house macs can wirelessly use the same backup through the Airport Express. THEY EVEN HAVE A PICTURE of it!
So they need more time, okay. But I feel lied to. The least they could do is make a press release with an ETA! The hush hush, makes it seem like they are going to scrap it and pretend it never happened.

How do I connect a Maverick imac and a snow leopard mac pro file sharing

I am trying to connect an imac running Maverick, and an older mac pro 1,1 running snow leopard. The mac pro does not have airport. I have tried connecting using my wireless router: mac pro ethernet conencted and wifi with imac, but I either cannot connect or it takes forever. I need a more reliable solution. I bought an airport card for the mac pro. I hurt my foot, and am laid up, and have to access the massive files on the mac pro and external drives with the imac. They are about 75 feet apart. The imac uses the wirteless router just fine, which is next to the mac pro. Which is the better solution, buying a long enough eitehrnet cable, and direct connect, or install the airport card and connect using airport? One more concern, I noticed my neighbor has a mac, and his mac keeps showing up on the network as a lockede but selectable mac. I am concerned about my security. Which is best, and what is the sequence to set it up? I can see that a step by step process with proper sequence and settings is critical to get tis to work. Thanks for any help.

How are you currently trying to connect? The easiest method for setting up across operating systems would be to connect using AFP, the standard protocol Macs use to share files over a network (though, SMB2 is now the default method in Mavericks). Are you attempting to simply transfer data from one machine to the other, or set up a local network between these machines? If it is the former, the easiest method may be to use an external HDD to copy data from one machine and then transfer it to the other.
See below for AFP:
Mac Basics: File Sharing - Support - Apple
And a youtube video:
Mac 10.6 OS X Tutorial - File Sharing -AFP FTP and SMBS - Video ...
One more concern, I noticed my neighbor has a mac, and his mac keeps showing up on the network as a lockede but selectable mac.
This is normal. You would need to explicitly grant your neighbor access to your machine for him to access anything on the machine, just as you need to do the same with your own computer you are attempting to connect.

IPhone 3Gs, Mac Pro Internet sharing via Airport connection problems

Similar Messages

Maybe you are looking for