Iphone 3gs no longer will work after iOs5 update,comes up with message ' there is no sim card installed in the phone. Can anyone help me please. I am working as a volunteer in a remote location in Asia and no where near an Apple shop etc?
I have tried to update my 3GS phone and now it longer works as it comes up with message there is no sim card installed in the phone. Can anyone help please as I am no where near technical support as I am working as volunteer in remote Asian country
Hi Allan,
Thanks for asking, I knew I had forgotten to mention something. The phone was indeed unofficially unlocked, since there were no apple stores or even premium resellers in the region I lived in during the given procedure had to be done.
I understand this could be a further complication, especially the fact the home button does not work. However, I was wondering if there would be a possibility to use a third-party application instead of iTunes to restore the iPhone? IF someone does know of such an application, I could easily solve further problems myself. Basically, the main issue here is my lack of ability to enter DFU mode.
Similar Messages
-
Ii'm updating my iphone 3gs but cannot activate it because the message" there is no sim card installed in the iphone you are attempting to activate", appeared. I've already disconnected my iphone and reinserted the sim,still nothing happened.help!
this problem startedwhen i tried to restore my i phone to original version ,when i had resoterd it said connect to itunes when i connected to i tunes it said no sim card installed so it cant be activated ,and now am stuck.i cnahged my simcard 3 times!!!
-
I've a request to unlock my phone to Telstra and recive info for unlocked.
After that I restore the phone following the instruction: http://support.apple.com/kb/HT5014.
I can't active my iPhone anymore. When connect to iTune, I got error message "There is no SIM card installed in the iPhone you are attempting to activate." even my SIM is working wellRead here:
http://support.apple.com/kb/ts4148 -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743 -
when restoring cannot pass message (There is no SIM card installed in the iPhone you are attempting to activate.) and there is a active Sim card inside. How can I get Pass that message?
Was your phone locked on a carrier and you unlocked it by jailbreaking ?
-
I having problem keep ask me connect to itunes......can't restore...keep show there is no sim card installed in the iphone you are attempting to activate.....how?
ITUNES show keep show there is no sim card installed in the iphone you are attempting to activate.....how?rajafromcalifornia wrote:
how can i get rid of this error There is no sim card installed in the phone u are attempting to activate please disconnect and a sim card in the phone please help me and my iphone cannot go to menu display can u help me please
You cannot active a phone if it does not have a SIM card in it. Period. End of discussion.
If you get this error and it has a SIM card in the phone then either the SIM card is defective or the phone is defective. Get a new SIM card and try again. If the problem occurs with the new SIM card the phone needs to be repaired. -
trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after that this happen. i tried with other sim same message come again and again.if any body know solution let me know. thanks
Was the SIM card activated on another phone? I assume this is an ATT style trying to use on T-Mobile? Was the SIM installed correctly? Is the carrier (like T-Mobile) operating IOS 6 devices yet?
If the SIM is a valid SIM from say T-Mobile, you may want to contact them for assistance activating the SIM card.
Activation and SIM issues typically point to the carrier. And if this was a CDMA phone say working with verizon, it will NOT work for ATT or T-Mobile as they use different electronics on the 3GS. The SIM slot is for international use only. -
there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)
Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you, -
how to fix my iphone 3gs after ios 6 ?there is no sim card install in the iphone you ar attempting to activate
Hello James,
Thank you for the details of the issue you are experiencing with your iPhone. I recommend following the steps in the article below if you are getting the message "No SIM" when your SIM card is installed:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I was using iOS 7.0.1 an hour ago. Upon update to 7.0.2 I get "There is no SIM card installed in the iPhone you are attempting to activate."
I know I haven't a SIM. I threw it away. I moved on. New carrier - HTC phone. I've been using my iPone 4 as an iPod without the SIM for over half a year. Before that I did the same with my iPhone 3 for much longer.
What hoops do I have to jump through now to recover my iPhone 4?
The phone has never been jailbroken or altered.
ATT was my original sevrice provider while I bought my device from Apple.All iPhones require activation after a restoration and an iOS upgrade. There really was no reason to throw your deactivated SIM from AT&T away. You'll need an AT&T sim to activate that phone. It doesn't need to be active, however. Borrow one from someone to get your phone activated
-
I want to activate my 3GS iphone, but messege in itunes always display :- "THERE IS NO SIM CARD INSTALLED IN THE iPHONE YOU ARE ATTEMPTING TO ACTIVATE". What can I do to activate my iphone?
Install a working SIM card.
-
THERE IS NO SIM CARD INSTALLED IN THE iPHONE YOU ARE ATTEMPTING TO ACTIVATE - and there is? Has anyone suffered this and what to do? Thanks
Possible causes:
1) Improper SIM card placement.
2) Faulty SIM card.
3) "No service" area of the cellular network.
4) Unsupported carrier.
5) Network locked iPhone. Trying to a activate a locked iPhone on a different cellular network. (Other than to which it is originally locked to).
6) The computer doesn't have an internet access on which you are trying to activate your iPhone using iTunes.
7) Apple server busy (rare). -
There is no SIM card installed in the iphone you are attemting to activate
just now i was installed ios 5.0.1 but i canot activate my phone it is showing "There is no SIM card installed in the iphone you are attemting to activate"
i had a problem just like this and i found out it was the sim, cos its hard not to put your finger on it when putting it in the phone. the way i did it was to put it in the holder on the iphone and then clean it while on there and then put it in after a bit O2 gave me a replacement sim and worked well.
If this doesn't work well then i would say go to your apple store http://www.apple.com/uk/retail/geniusbar/
they should be able to run tests on the phone and give you a new one right in the store. if its anything to do with the phone the guys in there will make sure you leave with a working phone, if its down to the sim then they will say go back to O2 and O2 will have to fix the problem cos to apple they would of given you a new iphone.
Note if they give you a new iphone then you have to make sure you give your insurance details of your new phone to them. -
my iphone is displaying "there is no sim card installed in the iphone you are attempting to activate" wn i connect it to itunes,bcoz i hv installed ios5.0.1 for my iphone 3g.can you tel me how to solve dis problem?
I’m having the same issue.
My phone indeed has no SIM card. I kept the 3GS after upgrading to an iPhone 4 and I was simply using it as an iPod Touch.
As far as I had been told, I was perfectly OK to do that and it had been going fro update to update without any issue up to now.
The problem is that iOS 5 requires a new activation, and that this model cannot be activated with a valid SIM. Obivously, I’m not going to take a new line with AT&T ad pay $xxx every month just to be able to activate my previous phone.
I contacted AT&T but they had no clue how to get out of the problem and said it was in Apple’s hands anyway.
I tried restoring 4.3.5 on the phone, but so far I haven’t been successful :-\
I’m open to any suggestion
Corentin
Maybe you are looking for
-
Layer 0 exceeds max when formatting?
Please help. I don't know DVD studio pro so well, but I am trying to burn a DVD with a lot of menus and I get this message popping up: "Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker loc
-
Error in processing SAP Net Weaver 2004's Support Release 2
Hi, While installing PI 7.0, it wil asks for solution manager key, after entering the key starts proceessing the phases, While processing I got an error which is given below. An error occurred while processing service SAP NetWeaver 2004s Suppo
-
Cannot switch to Start Screen by Left-click of Start-Memu
I've installed W10 TP Build 9926 onto W7 Ultimate 64-bit. It works almost fine, except inability of Left clicking on Start-Menu. The Left-click has no effect, or my screen does't change to Start screen. The Right-click works, i.e. context menu appear
-
I've used Myxer since the iPhone 3G. I tried to sync my phone to get new ringtones, but I lost them all. Has this happened to anyone else? How do I fix it?
-
Deployment order across applications
I have a web app that implements ServletContextListener. This app on deployment looks for an ejb on another app. How do I tell weblogic to deploy the web app before the ejb app. These two have to be different applications. I cannot combine them into