IPhone 3GS Notes loses changes after upgrade to ios4.0.1

I've restored iPhone software after ios4.0.1 upgrade and Notes still loses content changes. What was bullet-proof application is now worthless until Apple fixes it. I doubt there is any solution other than waiting for new ios release or--how would I do this?--reverting to pre-ios4 OS?

Delete the email account, reboot the phone, and add it back. If it is a POP3 account you will lose email on the phone. Other types of accounts will resync email.

Similar Messages

  • Iphone 3gs not working properly after update to ios4

    I updated my 3gs to ios4 and have had nothing but problems since doing so. My battery is draining faster than ever, I have had problems syncing with the exchange server at work which has always worked perfectly before, my reception is horrible in places where it used to be just fine, such as my house. I am constantly dropping calls in my house where I know my phone worked just fine before. I know Apple says their formula for figuring signal strength is inaccurate and has been for years, but that really has nothing do to with the fact that my phone used to work at my house and now it doesn't. Regardless of what the signal shows, I know I used to talk on my phone at my house and now it's a real pain in the a** to try to get through a conversation. Also many of my apps such as weather and stock apps will not update sometimes for a couple of days, no matter where I am or what the signal strength says. Has anyone else had a combination of these problems and if so any luck fixing any of them?
    Thanks

    Apple release an article after iOS4 came out about downloading a new exchange file
    Seen here.
    http://support.apple.com/kb/TS3398
    I would start by doing this fix and see if that helps out any of your issues.
    I would suggest to sync everything and then back it up, restore your device to 'new', download this new exchange fix and then either restore your phone or better, re-sync you phone.
    Good Luck

  • Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

  • Cannot backup iPhone 3GS to my computer after upgrading to IOS 5.0 due to "corrupt backup file"

    How do I sync my 3GS to my computer after upgrading to IOS 5.0.1 and getting message "corrupt backup file, delete and retry"?

    Some Users have reported that a Restore has Resolved Issues after the Upgrade...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • IPod in iPhone 3Gmusic doesn't work after upgrade to iOS4

    My iPhone is very unstable after upgrade to iOS4 and one major failure is that iPod music doesn't work properly, some song (recently purchased from iTunes) cannot be played even if it is in the list. There are a lot of new space in memory after upgrade, seems songs are removed or compressed in some stupid way.
    Spotify is also working like **** after upgrade to iOS4. Also big problems with the phone being slow and hanging in many different kind of modes.
    From being a real iPhone fan, I am very disappointed. Maybe Apple think they are immortal now and think they can release any kind of crap and still keep their customers...

    Try resetting the App Store and Clearing Cookies.
    Reset       Learned from Old Toad
    App Store support. There is troubleshooting and a contact link.
    Support
    Time Machine
    Inherit a Backup
    Inherit a Backup (2)

  • Iphone 3gs problem with network after upgrading to 5.1.1

    Hi...
    I have Iphone 3gs and requested official unlock from my provider. They said they did it and all I have to do is connect it with iTunes.
    I had ios 3.x and upgraded to 5.1.1 through iTunes.
    But now after upgrade, my phone is not unlocked and niether works with original card.
    3G network is one second ok, after one second drops to 1 line, and after that I got No network.
    I managed to make call, but that call only last for 1 second.

    I wouldn't assume that.  Don't know anyone who changed carriers without canceling the original.  The intermittent connections he describes are typical of SIM card issues.
    The point is that your statement that "updating is not enough" is incorrect.  When he "updated" to iOS 5, a full restore was already done. If there were errors during that process, restoring again might help, but its not necessary to restore.

  • Hi, I have an iphone 3GS from HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out! When I checked my backup file in Outlook Express it was also wiped out!!! What can I do now?

    Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

    Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

  • IPhone 5s not receiving iMessages after upgrading to iOS 8

    After upgrading to iOS 8 my iPhone 5s is not receiving iMessages from the rest of the family. My phone shows up green instead of blue on the other phones. I have tried all kinds of resets, turning off/on iMessages, etc. Nothing has worked so far. Any suggestions will be appreciated.

    Hi there eyab2010,
    I have an article for you that outlines some troubleshooting steps related to this issue with Messages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Car bluetooth not displaying contacts after upgrading to iOS4??

    After upgrading my iphone 3GS to OS4.0, my 2010 Grand Cherokee will no longer display names when using the built in UConnect hands free bluetooth system. It worked fine before the upgrade. Now when I get a call, it will only show "incoming call" or a long string of numbers and letters. This is so frustrating! Fix this apple or let us downgrade until this can be fixed.

    It may not be supported as of yet. The iOS4 just came out and not many searches are related to updating the UConnect standard. They are mostly related to the "MyGIG" UConnect version of equipment installed which are on the more expensive models (SRT8 for example).
    You can contact Chrysler for more support information including the firmware update to allow iOS4 but they may not be able to answer your question for factory installation reasons.

  • Camera lock screen iPhone 5 not working properly after upgrade to iOS 8

    After I installed iOS 8 on the iPhones 5 of my and my wife's the camera on the lock screen isn't working properly anymore. When I swipe up, the camera starts but the screen turns black within less then a second.
    On the iPad 2 and the iPad Air (both upgraded to iOS 8) I don't have this problem. It seems to be iPhone 5 specific.
    Has anyone else experienced this problem?

    Having the same problem.  I'm on an iPhone 5 and I have updated to 8.0.2.  When I go to apps directly from the lock screen (timer, calculator, camera) it opens up then immediately turns into a black screen.  It appears that removing my passcode fixes this bug, but I can't have an unsecured phone.  Please help Apple!

  • IPhone 3GS Not Turning On After Being Dropped

    I dropped my 3GS on a tile floor today (NOT in water)and now its malfunctioning.
    When I plug it into the wall charger it turns on an i get this screen: http://i53.tinypic.com/29zsvhx.png
    I can only make emergency calls.
    I can also click this little i and it says: *IMEI: unknown ICCD: unknown*
    I have no clue what this means.
    Whenever I unplug it from the wall the screen automatically goes black and i get this: http://i53.tinypic.com/2utnuol.jpg
    The screen works fine when its plugged into the wall and there are no black spots where there isn't a picture.
    When i plug it into the computer, and more specifically iTunes, nothing happens. It doesn't even turn on.
    Ive tried doing a hard reset when its plugged into the wall (I cant other wise) and nothing changed, it went back to that same screen in the first picture.
    I cant for the life of me figure out whats wrong with this thing, help?
    Message was edited by: rmullin
    null

    It's broken. Probably beyond repair.
    IF there is no visible sign of damage, they might cover it under warranty, if it's still under warranty. Otherwise, you're probably going to have to investigate 3rd party repair or just get a new phone.

  • IPhone library not updating changes after ios5 update.

    I updated my iPhone4 to the new ios5 and now my music won't update changes I make. (For exampe: changed the name of the "artist" in the iphone library, added artwork, etc...). It says it "synced" but the changes aren't showing on the phone itself, just in the library when it is plugged into my computer. I set my music to be manually managed. Usually after making changes, the library would say "updating...this may take a few minutes" on the phone, but it is no longer doing that. Suggestions?

    I found something that seemed to help
    Go to Settings > Music, and turn off the "group by album artist" option.  Once I did that, everything seemed to work fine.  All  the new music I added magically appeared in the "Artist" view inside the music app after that, and changes to tags actually apply now!

  • Iphone 3gs gone completely useless after upgrading to IOS 4

    After going through all the hassle of upgrading it, i enjoyed about 3 4 minutes of multitasking before i experienced my first reboot, then it started to reboot constantly when i run apps or just surf the web, however if i leave it idle it is fine.
    Later on i discovered that it reboots everytime my call hits the 3 4 minutes mark, EVERYTIME! And after 2 days of usage, i found out it reboots while i charge it as well, both charging through the computer or normally.
    Now it is just sitting there connected to the charger with the apple logo going on and off repeatedly, cant do anything about it.
    RIP Iphone 3gs

    the thing is the constant rebooting used up the last bit of power and i cant turn it on anymore. If i connect the iphone with the usb charger it just keeps booting till the apple logo and reboots.

  • Camera lock screen iPhone 5S not working properly after upgrade to iOS 8.1.3

    Actually, i upgrade my iPhone to 8.1.3.
    What i am trying achieve is, when my iPhone is locked i just need to access my camera without login.
    When i open camera when my iPhone is locked, camera displays for 2 seconds and then my screen will be black.
    Has anyone else experienced this problem?

    Hi there, I haven't actually heard of this issue but I would advise restoring your iPhone which should fix that. Follow this article below and follow the steps.
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Bluetooth not working properly after upgrade to iOS4

    I upgraded my iPhone 3g to iOS4 the other day. Apart from running stupid slow now, and even though i've done numerous hard resets, the bluetooth doesn't work properly anymore.
    If I switch off bluetooth, then switch it on, it connects fine. Once I disconnect though, that's it. I have to restart it again.
    Looks like all those complaints about iphone 4 are actually and iOS4 BUG.
    I wish I'd never upgraded now. Actually, that's not true. I wish Apple would help me DOWNGRADE my iphone 3g so i can use it again. I will not go and buy and iphone 4 just cos of this. If anything I'll switch to Android just because a) i'm not a fanboy and b) consumers should not be treated in such a belligerent manner.
    So, anyone know how to resolve this bluetooth issue? It's got to the point where it's dangerous in the car because my phone rings and I have to recycle the bluetooth to connect it.
    Message was edited by: anthonybrooker

    The problem you are having following the upgrade to Leopard (10.5.6) from 10.3.9 is similar to those of people who have upgraded from Tiger, and has been covered by the support document at the link below:
    http://support.apple.com/kb/TS2537
    Your issue will be due to files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those. You will not have the files named to include MessageRules because you have not used Tiger.
    To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
    Ernie

Maybe you are looking for

  • Database and Listener start up 'OK' (status code 0) but can't connect?

    Hi guys, I've got an instance of EBS with database 11.1.0.7 on Oracle Linux 5.8 in a VM. It's a new instance and been working for a few days but now I can't connect to the database. I'm using the standard scripts that have been working so far to brin

  • Best way to update io5 from ios4.3

    Hi. I am using iphone 4 and got message in itues for updation on new ios5, while updating i got the message that itunes media need around 5 GB space to backup and my PC don't have space in C drive, i have two question 1. Best way to update iOS5 by re

  • I have a MAC Tiger and updated to a Snow Leopard,

    Having trouble with Apple works 6 Just updated my Tiger to a Snow Leopard and certain pages in the Apple works 6 take to long to print. 4 to 5 minutes sometimes before the printer starts. Not all the forme just a few. Others print very fast. Hard dri

  • I can't download the adobe app do my desktop

    i can't download the app to my desktop. and i have the space and everything thats needed but it still won't work! and when i try to install it, it sais that i have to have a whole adobe creative cloud or that mine is brooken" to complete the install.

  • Looking for a programmatic/command line approach to auditing registry changes

    http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/regedit_audit_key.mspx?mfr=true I'm looking to enable auditing on registry keys, but not have the user have to manually go through this process. Can you do this via comman