Iphone 3gs replaced today with new one, clicked restore and problems!!!

hi please can you help!?
got a new iphone today (as the old one had a faulty battery)
plugged into itunes, then clicked restore and it wouldnt accept my old back up as the new phone didnt have the latest software on it!
so i clicked for it to update my new phone but now i cant find my old backup which has all my contacts and photos etc !!
how can i get my old backup back?? it doesnt show when i click to sync

fixed!
updated the new iphone to 4.2 then it gave me the option to choose my other old back up too

Similar Messages

  • My Iphone updated today with new IOS 6.1 and while doing that it has sync my phone number with my wife number in the same cloud that we have hence we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings

    My Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
    Thank you

    My Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
    Thank you

  • I go to sync my Iphone 3Gs (IOS 5) with iTunes on my pc and is is stuck on step 8 "waiting to copy items" it has been like this for over an hour.

    I go to sync my Iphone 4 (IOS 5) with iTunes on my mac and is is stuck on step 8 "waiting to copy items" it has been like this for over an hour. What can i do to fix this problem????

    If you are stuck at the blue screen then you can try booting into safe mode (hold shift during boot) and then run disk repair. If that still doesn't fix it then you might have to reinstall OS X. What version of OS X are you running?

  • HT4061 How do you change your phone number than is in your iPad and replace it with right one to receive and send messages?

    How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?

    It's best to use an email address on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Replaced iPod with new one but do i have to intall itunes again?

    Hi, i have just recently replaced my ipod mini with an ipod video. Do i need to re-install itunes with the new ipod or can i just plug in the new ipod and transfer all of my songs onto it?
    thanks
    iPod Video   Windows XP  

    If you have iTunes 7, just plug in the new iPod.

  • Replace parts with newer ones?

    I have a 13" MacBook Pro (Mid-2010) and I've been trying to find out ever since the 13.3" MacBook Pro (Early 2011) came out if its possible for me to replace parts of my MacBook Pro with parts of the new MacBook Pro. For example, replacing the 2.4GHz Intel Core 2 Duo processor that is currently in my MacBook Pro with the new 2.3GHz dual-core Intel Core i5 processor or 2.7GHz dual-core Intel Core i7 processor. So is it possible to replace a part of the 13" MacBook Pro mid-2010 with a part of the 13" MacBook Pro early-2011?

    No, the only items that can be replaced by you are RAM sticks and the hard drive, all other items are motherboard soldered components and cannot be touched by the user.

  • I just got tOhe iPhone 4Gs today and had contacts and photos uploaded from another phone synced new phone with iTunes for music and accidentally restored it so all my old iPhone stuff is on the new one is there any way to fix this

    I just got tOhe iPhone 4Gs today and had contacts and photos uploaded from another phone synced new phone with iTunes for music and accidentally restored it so all my old iPhone stuff is on the new one is there any way to fix this ?! Please help !!!!

    Could you be more specific about what exactly do you want to fix now?

  • HT4993 Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • Hi, my Iphone 6 dropped in water, and couldn't save it back although I tried with rice bag. So,how much would be cost if I can exchange with new one? Please kindly drop message about how to deal with it. Thank you.

    Hi, My Iphone 6 " iOS 8.1"  is dropped in water, and couldn't save it back although I tried with dryer and also put it in rice bag for 3 days. The flash light was still on even though the screen shows up nothing at all when i try to switch on after 3 days I put in the rice bag. So,how much it would be cost if I can exchange with new one? Please kindly drop message about how to deal with it. Thank you.

    Out of Warranty replacement on iPhone 6 is $299 US, adjust for your location.
    It is highly suggested that you make a Genius Bar appointment to avoid delay
    if going to an Apple store.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/

  • Just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

  • I want to set up my new iPhone 4s on my mac but my iPhone 3GS is sync with my pc how do I get my stuff of 3gs

    I want to set up my new iPhone 4s on my mac but my iPhone 3GS is sync with my pc how do I get my all my stuff of the 3GS on to the iPhone 4

    You should be able to sync your 3GS to your computer and make a backup.  Then connect your iPhone 4S and restore from a backup.  This should effectively move all your data to your new device.  Report back if you have any problems.
    If you are wanting to move our data from a Windows machine to your Mac, just let us know.

  • HT1414 I dont know why bt ever since I updated my iphone 3gs 16GB to the new 5.1.1 firmware I am unable to activate it with my any sim card, so is there any way to fix this. Im from India

    I dont know why but ever since I updated my iphone 3gs 16GB to the new 5.1.1 firmware I am unable to activate it with any sim, so is there any way to fix this please? Is there a solution to activating my Iphone 3gs on this firmware? I purchase this iPhone from USA and Im using it in India. Please help me...

    This means the iPhone was hacked to be unlocked. The 3GS was not sold in the US as officially unlocked.
    Restoring an iPhone with iTunes that was hacked to be unlocked or installing a firmware update on an iPhone that was hacked to be unlocked re-locks the iPhone to the carrier the iPhone was sold as carrier locked when new. In this case, re-locked with ATT.

  • Replace playing video with new one in osmf player

    Hi,
    I have a problem with loading new video in osmf player. First video is loaded from the emmbed code, and I use ProxyElement to comunicate with MediaLEment and to load my plugin. But after some actions in my plugin I need to load another video in the Player. By changing the DisplayedObject from the proxiedElement I am loading the new video but the old video from emmbed code is still runing on the back. Does anyone know how to remove mediaElement created by the player or to replace with new one, ot at least to disable that video from playing. I tried with everything and it doesn't work.
    Thanks

    hi,
    you can change into new Data Source.
    From new Data Source you can load data into the old ods.
    but if you want to kepp the old records as it is, then don't delete data in the ods.
    hope this helps......
    Rag
    Pra

  • I got the old iphone, can i replace for a new one??

    i have a old iphone which was the first iphone. it,s worn out.....can apple replace for a new one of the same model

    Apple has an out of warranty replacement program, the cost in the US is $199. I don't know if any original iPhones are still available under this program(remember, that phone was discontinued sometime ago), but even if they were, why would you spend $200 on a discontinued phone?

Maybe you are looking for

  • Delivery is not possible as per Schedule line dates

    Hi Gurus, The schedule lines insales order are for eaxample--- 01.12.2008  -   10 pieces (quantity) 15.12.2008  -   10 10.01.2009  -   10 25.01.2009  -   10 Tried to deliver the quantity 10 dated 15.12.2008 in the last after all the materials pertain

  • Deploy to jar

    Hi. I develop simple project based on JDeveloper 11G ADF Business Components     11.1.1.56.60 BPMN Editor     11.1.1.3.0.6.84 CVS Version     Internal to Oracle JDeveloper 11g Release 1 (client-only) Java(TM) Platform     1.6.0_23 Oracle IDE     11.1

  • BI Publisher output problem

    Hi, This is BI publisher report ....i have registered concurrent program and data definition and templates ...After we submit the SRS window the output came in XML template but not excel format ....wat is the reason ...plz help me... Thanks, Sidharth

  • Suppress Print Dialogue while calling ADOBE FORM

    Hi, How to suppress the Print dialogue when I call PDF FORM. In Smart form interface we have a field no_dialogue in the structure SSFCTRLOP to suppress print dialogue. But in the Function Module generated by Adobe Form or in the Adobe Form Interface

  • InDesign Server CC2014 Trial issue

    Hi, I cannot start our InDesign Server CC 2014 (Windows Server 2008). I have installed the software and was logged with our Adobe ID and installation was successful without any error message. The installation manual states that "InDesign CC Server ne