IPhone 3GS rings after 5 seconds

This is very weird and it happens to my iPhone 3GS and my sister's 3GS. So when someone calls the iPhone, it doesn't ring immediately. It actually takes at least 5, sometimes more seconds to ring. This is a lot of time and I miss important calls. Both phones are FACTORY unlocked and work on T-Mobile but it's the same on AT&T so it's not provider's issue since other phones don't have this problem. I saw a lot of people have had similar problem. Does any one know if I can fix this? It's definitely not a defective phone it's just the way it is with the iphone and I don't have any idea why it takes 5-10 seconds before it starts ringing

Botev1912 wrote:
Let me explain this again. It doesn't go to voicemail quickly. Imagine phone 1 and phone 2. I make a call from a phone 1, wait 5-6-7 seconds and phone 2 (the iPhone) starts ringing
Let me see again if I understand what you are saying. When do you start counting these seconds? Is it from the first time you hear a ring in your ear on the phone you are calling from? I've had a number of phones, and I know that calls need setup time, generally a little more than landline phones. I know in a later post you mention a Nokia only taking < 1 second. You also say it is not going to voicemail too quickly. I guess my real delemia here is, how are you missing calls if they are not going to voicemail. Do they just quit ringing because the person on the other end is hanging up? How long are they waiting, or in your case, how long did it ring before it went to voicemail before you hung up on your test call, I guess the question is how many rings. I'm not understanding why this delay in the beginning of ringing is troubling you if the calls is not being rerouted to voicemail, therefore impacting your ability to answer it.
The standard troubleshooing steps are power off/on the phone, if that doesn't help, then a reset, holding the power and home buttons together until you see the Apple logo, then releasing, ignoring the slide to power off screen. The next step is a restore, first from a backup, the next as a new phone or not from backup. The next step is outside of user troubleshooting and that is to send or take it to Apple, however since you purchased these units in England, that is where you would have to go for service, since the iPhones are serviced in the country they were sold in.
Hope one of these help.

Similar Messages

  • IPod on iPhone 3GS closes after 1 second

    Believe it or not, I have not used my ipod on my 3GS since I got it 6 months ago. I downloaded my first podcast and tried to open the ipod app but it closes after only 1 or 2 seconds. There is nothing I can do to keep it open. I went to settings to see if there was something in the ipod settings that looked like it might need configuring but I could not determine anything wrong there. I also tried rebooting my iphone. That did not help. Any suggestions why my ipod closes suddenly and how I can fix that?

    Try doing a soft reset on your phone. Just press and hold the sleep/wake button and the Home button at the same time for 10-15 seconds (just ignore the slider) and just let go once you see the Apple logo. You won't lose anything on your phone, by the way. :P If that didn't do the trick, go ahead and restore your phone. Just make sure you backup everything to iTunes before restoring.

  • IPhone 3Gs keeps restarting ever second I've tried everything that I possibly could but nothings working...

    Ok I have noticed alot of the same posts but my iPhone 3Gs is restarting every second not minute. It started when I went to restore my phone cause i saw for some odd reason i had over 2gb of memory being waisted by "other" what ever makes that up, anyways so after i restored it I told it to restore from back up ever since then it keeps restarting. help please :-/ ???

    Then the next step is to try the process again, this time restoring as a new iPhone rather than from backup.  (The restore may not have worked if the source of the problem is contained in your backup.)  If restoring it as new doesn't resolve the problem then it is probably a hardware problem and you will need to take it to the Apple store for evaluation.  I would save a copy of your backup to your desktop before proceeding so it isn't accidently overwritten.  If it is a hardware problem and you end up replacing the phone you will want to restore your new phone from this backup in order to keep your data and settings.  You will find the backup at one of these locations:
    Mac OS: ~/Library/Application Support/MobileSync/Backup
    Windows XP: %AppData%\Apple Computer\MobileSync\Backup
    Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
    Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup

  • Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?

    Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?
    I'm all mac-based and followed the instructions for the upgrade to iOS6 software for iPhone but now my calendars won't synq.  When I connect to iTunes and run the synq process, it gets stuck on the Calendar step and will not finish the synq process.  I have to either wait for it to quit or force it to quit.  Additionally, when I try to log a new event or meeting onto the Calendar on the iPhone, it will lock up and quit the app.  I then have to shut down the iPhone to get it to open again but it just locks up again when I try to log a new event.  Any suggestions?  I'm tempted to do a back up and reinstall but don't want to risk any data loss.

    Hi there,
    I am using Rogers, which does support tethering.
    The iPhone does not show up in the list of devices in the Bluetooth preference panel. It fails at the Pairing step of the Bluetooth setup assistant.
    Cheers!

  • I restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

    i restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

    Yes. Talk to whoever replaced the battery. Sounds like they broke something.

  • HT4623 I Upgrade Iphone 3GS And After All Iphone Cant Active.. what Can I Do.. ,,Your Iphone Could Not Be Activated Because.......,

    I Upgrade Iphone 3GS And After All Iphone Cant Active.. what Can I Do.. ,,Your Iphone Could Not Be Activated Because.......,

    Activation issues are almost always the result of a device that has been hacked or jailbroken.
    If this is the case, no support can be provided here.

  • Iphone keep restarting after 60 seconds

    I need help for iphone keep restarting after 60 seconds, when I update ios 5.0.1 (9A405), how to overcome these problems

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it back to factory settings would be the next step:
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Vechr good guys please tell me I can not activate iphone 3gs unlock after the official sees no sim card

    vechr good guys please tell me I can not activate iphone 3gs unlock after the official sees no sim card

    Disable your antivirus and firewall.
    If that doesn't fix it either the phone was jailbroken or hacked, or the computer you are using was used to hack or jailbreak some other iDevice.

  • My Iphone stopped ringing after my last sync

    So I synced to iTunes and I bought two ringtones. I synced them to the phone. After that, my phone only vibrates, but NONE of the rings "ring", although the settings are correct the volume is at max.
    I went to the genius bar at my local Apple store. They told me to restore in iTunes my phone to its original factory condition. I clicked on restore and all my photos and songs disappeared. So I test the phone. Nothing. Not ringing. People call me and I don't hear, obviously. Very frustrating. This is the 3rd. day and it's driving me crazy.
    So I put all my data back into the iPhone. Still won't ring. Some bug when I synced it? Hardware fault? I did not want to go through the trouble of replacing it but tomorrow I am going to the Apple store again. I hope they do something about it, because a 500 dollar phone that does not ring after 3 months is real bad.
    I have not heard anyone having this problem on any iPhone message board.
    Any other ideas?

    Another thing to try is turning the iPhone OFF - completely OFF - not just putting it to sleep - but actually turning it OFF. I say this because some people don't know that the iPhone has SLEEP mode (which it is in most of the time) but then can also be TURNED COMPLETELY OFF.
    It's a computer. Turn it off and back on every once in awhile (especially) if you have trouble. Treat it the same way you would restart your desktop/laptop computer.
    That is all

  • My iphone 3GS crashed after iOS4.0.2

    Hi,
    I installed iOS4.0.2 last week. My phone crashed after that and not coming up. So I tried to restore from itunes, my iphone is at recovery mode and didn't started after that. Even now my iPhone 3GS is not displayed in iTunes.
    I checked USB port; reinstall iTunes etc. But my phone is not coming up. It is showing only one screen ( connect to iTunes) and iTunes is not showing any sign of iPhone.
    Suggest how can I restore my iPhone 3GS.

    It sounds as if you had a similar problem to me.
    Does iTunes try to reset and restore your iphone and you get an error message 1604?
    I tried everything that was suggest by Apple, and then someone on here said try a different computer and it worked. So if you can access a different computer it's worth a try.

  • Iphone 3gs crashed after installing new ios update

    Please help. I just installed the newest ios update to my daughters iphone 3gs. It installed successfully, i thought. Then about 10 minutes later it said verifying update. It went off and now tries to come back on and the apple icon flashes for a few seconds and goes back off. I have tried a hard reset (both home and off buttons held down) and it does the same thing:(  Please help me!

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Perform a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT201412 iPhone 3GS unresponsive after updating to iOS 6.1.3

    My unlocked iPhone 3GS's touch screen and volume buttons has become unresponsive after allowing iTunes 11.0.2 to update the iPhone to iOS 6.1.3. I have tried restarting, resetting and restoring the iPhone several times. It will no longer function at all without a SIM so I purchased an "Amaysim" prepaid SIM so I could use the phone however this has not acheived anytihng.
    My phone is now a brick - any help would be greatly appreciated.

    Hello !
    Just try to restore your iPhone, if it don't work, bring it to the Apple Store, they will help you with your product
    Hope I Helped !
    Raphaël Touchette

  • My iphone 3gs unlock after the contract

    My iphone 3gs was locked to AT&T. After the contract , I came back to India. Now how can i get it unlocked?

    You must contact AT&T to get the phone unlocked.
    Cheers,
    GB

  • IPhone 3GS freezes after 4.3 upgrade

    2 days ago I upgraded my iPhone 3GS (factory unlocked) from 4.2.1 to 4.3. After this upgrade, the iPhone freezes and crashes constantly. Sometimes when typing the lock code, when starting any given app, when touching any button, everytime within one minute after restoring. When the phone is working, it gets no network (just WLAN). Provider is Vodafone.
    After each crash, a full restore is required (which takes a lot of time), just to work for another minute or so. Using a different SIM card from O2 helps by not crashing, but all 3rd party apps do not work.
    Going back to 4.2.1 did not work at all (tried all options), going back to 4.1 did not give me access to my backup.
    This situation is a nightmare if you rely on your phone. And it seams I am not the only one having this issue. Just search for "iOS 4.3 3GS crash Vodafone".
    When can I expect a patch of iOS 4.3 ?
    Dirk

    I am having the same issues with my 3gs. It is constantly crashing whenever i run any apps for more than 3 to 5 minutes. I have reinstalled and backed up everything but it is still having issues.

  • IPhone goes black after 5 seconds

    My iPhone 4s, when I hit the round button, my screen goes black after 5 seconds.  Not sure why, I dont have any timeouts in the settings set to 5 seconds that I can tell, the only one i have is the lock, but that's at 5 minutes.  but its pretty consistent if the screen is black, then i hit the round button and it's sitting at the screen to swipe to unlock, if i dont do anything for 5 seconds, it goes black again.
    It will also go black randomly while the phone is unlocked and in use.  any ideas?   Can't imagine 5 seconds is the default idle time for it to go black, that's pretty fast!!

    Your iPhone has suffered damage and will need to be take or sent to Apple for replacement. If you have AppleCare+ coverage, the cost wll be $79 US. If you don't, the cost (if memory serves) will be $269.
    Regards.

Maybe you are looking for

  • Questions on the LRS network model.

    On page 6-26 of the "Oracle Spatial Topology and Network Data Models" documentation, the example shows that measures are recorded in the 'roads' table (i.e. the one with the geometry of the feature). 1. Why in this example is 'null' used for Node 5 (

  • Creating sub groups in iFS...

    Please, let me in this... (1) Does iFS support the creation of sub groups underneath one group? For example,I am using the iFS Manager, and I want to create groups for that represent companies...Group A, B & C... Can I also create sub groups, Sales,

  • What Keynote features will not export well to PowerPoint?

    I am an expert PC user switching to mac... We use MS Live Meeting for webinars, and it only accepts (as far as I know) PowerPoint presentations. I would like to produce the presentation in Keynote, and then save as to PowerPoint. However, my experien

  • Count Rows before Excecution of BEx Query

    Hi all, I would appreciate it if someone could help me in the following matter: I have a BEx query with a large number of rows / records  (sometime about more than 100.000 rows) depending on the selection in the selection screen. I would like to coun

  • ABC analysis and cyclic inventory

    What is the relAtion between ABC indicators and CC indicators?Why do we need to run ABC analysis for cyclic inventory?Cant we randomly assign the CC indicators in MM02?