Iphone 3GS: screen resolution problems

Hi all,
My iphone 3GS' screen resolution spontaneously changed:
Its like the resolution is too high for the measuremens of the screen.
This way, like half a centimeter on each side of the screen (Top, bottom and sides) can not be viewed...
How can I solve this?
Thanks!

Sorry, already figured out it was the "triple finger double tap zoom" :-)
Thanks for the space

Similar Messages

  • Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

    Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
    The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
    But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
    This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

    Let me know if I should start a new discussion instead of opening a new topic here.
    My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem.  Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source.  Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all.  In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
    Is there any help for this affliction?

  • Why is my Iphone 3Gs screen appear to be disintegrating?

    Iphone 3Gs screen appears to have burn holes in it and looks like it is disintegrating in a pixelated format.  There appears to be a dark rainbowlike hole in the areas affected.  There are also small pixelated lines that run though areas of the top and bottom of the screen.  We tried turning off the phone for an extended period of time and it seemed to get better but now it the problem has persisted and gotten worse.

    Whether this is due to a defect in the display or damage, there's no way to fix it without replacing the display or entire phone. 
    If the phone is still under warranty or AppleCare, take it to Apple or whoever provides iPhone warranty service in your area.  If out of warranty, Apple can give you an out-of-warranty replacement (refurb) for $199 (in USA).
    Another choice is to take it to a 3rd party iPhone repair center which may be able to fix it for a lot less.  If you know what you're doing, you can buy a new LCD screen and install it yourself.

  • Iphone 3gs screen not flush

    My new Iphone 3gs has a problem where the top right hand side glass is not flush with metal bezel leaving a quite rough and sharp metal corner.Is the normal? im not thinking so as my 3g was flush all the way around.Im have also noticed the screen is slightly dipped on one side and not straight.I cant go back to the phone shop where i signed up its not close to where i live or work.Will i be able to arrange to get this fixed or replaced at the apple store in the city where i work ?
    Im actually not happy to let my neice play with the phone games as it is rather sharp.

    Maciej Karcz wrote:
    The right side on my 3GS is also a little higher than the left. I have read about a few other instances of this on the 3GS. It's not a problem for me since I keep my phone in a Griffin Clarifi case. Since the uneven lip seems to occur occasionally with the 3GS, replacing for a new one is no guarantee that it will be any better. I recommend just getting a case for the phone, it will keep the phone safe and your niece safe too.
    Mine is in a case, too. I did remove it and found no noticeable difference, right to left. I agree that a case is the best way to go .. with or without any cosmetic flaws in the iPhone.
    Phil

  • EHP1 Upgarde Monitor screen resolution problem in a support message

    Hi Experts,
    We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
    Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
    How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
    can any one suggest how to make the overview tab visible completely with small resolution monitors.
    Thanks
    Nanda

    >
    Nanda Kishore wrote:
    > Hi
    >
    > There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
    >
    > Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
    SAP Note 1351673      Size of containers not changed for support messages       
    Best regards,
    Ruediger

  • Broken iPhone 3GS screen

    Broken iPhone 3GS screen how much is to fix

    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • Screen resolution problem in table control

    when i was transfering data in BDC using table control,i got screen resolution problem.
    how to rectify the problem?

    Hi,
    Check this coding.
    WA_CTU_PARAMS type ctu_params.
    WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
    WA_CTU_PARAMS-UPDMODE = 'S'. "synchronous update
    WA_CTU_PARAMS-NOBINPT = 'X'.
    WA_CTU_PARAMS-NOBIEND = 'X'.
    WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
    CALL TRANSACTION 'VA01' USING it_bdcdata
    OPTIONS FROM WA_CTU_PARAMS
    MESSAGES INTO it_mesg.
    Default size will play good role in terms of resolution. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resolution. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards

  • Screen Resolution Problem in Session Method

    Hi
    I want to use session method in BDC. How to resolve screen resolution problem in Session Method?
    Please give me the code or steps regarding this.
    Thanks & Regards
    venkateswararao

    Hi
    U can only run the session with the option Dynpro Standard Size setted.
    In this way the system should be use the same resolution for every situation.
    Max

  • To Resolve Screen Resolution Problem

    Hi
    How to resolve screen resolution problem in BDC Session Method. can't we use ctu_params?
    Thanx & Regards
    venkat

    Hi Venkat,
    Yes, you can use ctu_params.
    This is for Default screen size for CALL TRANSACTION. It signifies the screen size will be constant irrespective of the screen resolution(which can vary for different user). The importance of this lies in programs(module pool) that contain table controls. With default screen size we can control the no of rows in the table control which otherwise may vary depending on the screen resolution.
    DEFSIZE is the Selection as to whether the screens of the called transaction are displayed in the standard screen size. Values "X" (standard size), " " (current size).
    sample.
    data : x_ctu_params type ctu_params.
    To have default screen size, mode and update
      x_ctu_params-defsize = 'X'.
      x_ctu_params-dismode = 'X'.
      x_ctu_params-updmode = 'X'.
    call transaction tscode using  bdcdata
                              options from x_ctu_params
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • My iphone 3GS screen went black

    my iphone 3GS screen randomly went black and it was fully charged... ive tried to hold the buttons down that turn it off, i tried plugging it into the wall and my computer nothing is working the screen is still black

    My wife's phone has done this today.
    16Gb 3GS running 5.1.1 that has been fine up until today.
    It was around 80% charged and running rather slowly today, then it appears to have shut off. The symptoms are:
    - The screen has gone black (as in off, not on but showing a black screen)
    - The mute switch does not make it vibrate.
    - I can call the phone number and it rings, the phone does nothing though.
    - I connect it to my Mac and iPhoto launches, I can import pictures from it OK.
    - iTunes will recognise it eventually, but it will not sync, nor will it restore.
    - Holding the Hold & Home buttons does nothing.
    - I cannot force it into recovery or DFU modes.
    Bit stuck as to what to try next. Still seeing what I can find online.
    It only needed to last until next month!

  • Message says "screen resolution problem" and says to set higher than 1020 x 600. My screen resolution is set higher. Why am I getting this message all the time I use firefox?

    when I go on to Firefox I keep getting the message that there is a screen resolution problem and it says I should set it higher a than 1020 X 600. But my screen resolution is set higher. It is set at 1360 x 768. Why am I getting this message continuously?

    I've had the problem too... for at least a month or more. It would happen when logging into yahoo mail. But it happens only with firefox... not explorer. I contacted yahoo and he had me first disable add ons... no change... and since it didn't happen with explorer, they said to contact firefox. So I followed the advice of cor-el's post (on this page) and made the text on my page smaller... It did fix the issue.... but, I liked the size of the text the way I had it. So, how do I get it back to that size, and not have that annoying message any longer? thanks!!

  • Mi iphone 3GS tiene el problema 1015, como puedo solucionarlo. en internet me dicen que con un programa blackra1n, este programa es confiable???

    mi iphone 3GS tiene el problema 1015, como puedo solucionarlo. en internet me dicen que con un programa blackra1n, este programa es confiable???

    mi iphone 3GS tiene el problema 1015, como puedo solucionarlo. en internet me dicen que con un programa blackra1n, este programa es confiable???

  • How much £ dose the iphone 3gs screen cost

    how much £ dose the iphone 3gs screen cost

    At my Apple Store they still will replace the iPhone 3GS front screen assembly for $99 US. In UK it will be a lower number in £. See if your Apple Store does this. At worst you are looking at a perfect Replacement iPhone 3GS for £ 126.44 at UK Apple Store. Make Genius reservation first to avoid long wait.

  • Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

    why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

    hi smalley3,
    Welcome to the Forums.
    The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
    If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
    In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
    Support phone list
    Regards
     

  • IPhones 3GS screen suddenly fading away.!

    my iphone 3gs screen suddenly fades away, it happens more often when the battery is less than 50 %, and while the screen fades away i get calls and msgs and everything but i don get to answer them or even view them and then it takes lot of time to turn on with only apple logo showing up...!!! and when it turns on automatically the internet is connected and also i will be charged ..!!

    Given the age of the phone, this might be a battery issue and you'll have to get the battery replaced:
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

Maybe you are looking for