IPhone 3GS silent switch, help?!

My iPhone 3GS silent switch seems to work fine. But when the iPhone is locked and you turn the switch from loud to silent, or the other way round, the screen doesn't wake up to tell you this has happened, whereas all the other iPhones that I've seen seem to wake up to tell you the setting has changed… don't know if there's something wrong with the phone internally or if this is a software problem. Thanks!

If I were you I would bring it into an Apple store and have them take a look at it.
Make sure you make a Genius appointment before you go in.

Similar Messages

Iphone 3gs silent switch problem and volume rocker

Hi so basicly my iphone 3gs silent switch is loose when switched on silent it moves a tiny bit and goes on ring etc and also the volume rocker the one to turn up is kinda pushed in but still works to make it work you have to push hard. Does anyone know how to fix? thanks!

Check the tiny silver button on the left side of cell near the top & switch it so u can't c red dot

Iphone 3gs silent switch on/off

my iphone 3gs silent switch goes between vibrate and loud when pressed on the front by the speaker? any way to fix this? thanks

Check the tiny silver button on the left side of cell near the top & switch it so u can't c red dot

IPHONE 3GS SILENT SWITCH TOTALLY DEAD, NO SILENT FUNCTION???

My iPhone 3GS silent switch has been very tempermental recently, but as of last week, when I switch it onto silent, it does not do anything. No icon on the screen comes up, its just completely useless. Does anyone know what i could do to maybe bring it back? I dont want to take it apart as it could cause further problems... coule it be caused by dirt in the sliding area? I dont have any ideas. Any replies are very much appreciated!

If I were you I would bring it into an Apple store and have them take a look at it.
Make sure you make a Genius appointment before you go in.

IPhone 3GS Silent Switch

I dropped my iPhone 3GS yesterday and the silent switch no longer works. I have had the iPhone for about 14 months now, so my warranty has expired. I don’t want to go paying ‘big money’ just for a silent switch.
Are there any apps out there which allow the mute on/off to be controlled?
Has anyone else had this issue? And fixed without apple support?
Really missing this function. Can anyone help???

No apps can do that. Google for iPhone repair in your area... there's likely one that can fix it.

IPhone 3GS silent switch doesn't silence the device

I recently dropped my iPhone 3GS from the desk in my bedroom. I checked to see if it worked fine, and it did. No scratches or nicks.
After that, I found that the Silent switch does not work. I flip it down and receive no notification that the phone is on silent, no on-screen & vibrate notification. So, I tested it by calling my phone from the home phone - and my iPhone 3GS rang and vibrated.
I checked the settings and I even did a reset. Should I do a full reset (Erase All Content and Settings option)?
Thanks much.

If the switch was damaged with the drop, doubtful that restoring your iPhone with iTunes will resolve the problem,
No need to to erase all content and settings with the iPhone since doing so will require syncing your iPhone with iTunes afterwards, and is a secure erase which will take an hour or two.
You can try restoring your iPhone with iTunes from your iPhone's backup - sync your iPhone with iTunes immediately before to update your iPhone's backup and any data that is kept synchronized. If no change after that, the next option is restoring your iPhone as a new iPhone or not from your iPhone's backup.

IPhone 3Gs silent switch (Probable water damage)

Hi there,
After it spent about 20 minutes in a less-than-waterproof pocket during some heavy rain, I've been having problems with my iPhone. The silent switch seems to not work properly, I can turn it on to silent alright, and it'll happily stay there. But if I want to flick the switch back to "ring" mode, then the switch works fine, but it doesn't change mode. Sometimes I will see the bell show up on the screen, and it'll stay on ring mode for a few minutes, but then it'll put itself back onto silent mode. Also, if the switch isn't on silent mode then it will sometimes spend up to 10 minutes at a time constantly switching between silent and ring mode. As it vibrates each time it does this, it is getting annoying. Especially as it does this during the night if I forget to put it on silent, and this wakes me up!
I accept the fact that it was most likely the water damage that did this, but is there a way I can fix it? I've had friends who have put their iPhones through much worse treatment and they've come out of it alright. I have also tried doing a full factory reset, but this didn't help.
Thanks in advance to anyone who can help.

If I were you I would bring it into an Apple store and have them take a look at it.
Make sure you make a Genius appointment before you go in.

IPhone 3GS silent switch very tight! What to do?

I need some advise!
I bought the 16gb black 3GS at full price (Factory 86 week 30)
and the screen had a ghosting effect (the kind you see on an older LCD screen with slow response times).
I swapped that out with a new one, which seems fine... So I applied the invisible shield! After letting it dry for two days I turn it on, all is well.... BUT the silent switch is really tight! I have to use a lot of force to switch it to silent and back!
What should I do? Exchange it again & lose the invisible shield? Or keep it and accept that nothing is perfect (it's better than being loose).
I would really appreciate some feedback here!

I had the same exact problem after installing the invisible shield and I think it's because some of the liquid from the invisible shield got in there. I just kept using it and to this day (3 weeks later) it's back to normal. just use it daily so it gets loose over time. Nothing to worry about

IPhone 3GS silent switch broke covered in warrenty?????

Hi, my iPhone silent switch broke off during normal
use. Am I covered under my warrenty?

You'll need to make an appointment at the Genius Bar - http://apple.com/retail/geniusbar and let them decide.

Iphone 3gs keeps switching off during phone call showing apple logo

My iphone 3gs keeps switching of during phone calls. The apple logo appears and I have to wait until it switches itself back on, this happens without my help, any ideas please

Try restoring the iPhone. If a normal restore doesn't work, try setting it up as a new device.

Iphone ring/silent switch has stopped working

My iphone 3gs ring/silent switch has stopped working, whenever i switch it over to silent, it vibrates but then flickers between ring and silent and then ends up staying on ring, even when it is in the silent position. HELP!

Have you dropped your phone? Is it still under warranty? Does sound like a physical hardware issue, and I doubt anyone here can help further than telling you to make an appointment at a genius bar and get it fixed or replaced if allowed.

Iphone 3gs silent button

HI, The silent button of my iphone 3GS is not working, the phone does not vibrate nor does it go on silent
any idea how I can fix it?

well if the switch isnt working then what i would do is restart, reset, and then restore the iphone if that doesnt work it is hardware and if your within your limited hardware then it can be replaced for free

IPhone ring/silent switch doesn't work.

Weird problem. My colleague has an iPhone 3G which worked fine for over a year. But recently it developed a problem, its ring/silent switch doesn't really do anything. Earlier it showed an image on the screen notifying the change of mode. But now nothing happens.
The phone was not dropped and was not exposed to any shock as it is permanently kept on his desk, he never takes it anywhere (yes, even I find that weird ).
What could be the problem? He's very worried. Can someone help please?

hi there,
hope your problem is sorted but if not you could try the following tip i posted to a similar question:
for anyone who's iphone buttons (hardware) are not working, there is something you could try w/out taking your phone apart.
go to settings --> general--> accessibility-->turn on assistive touch
this results in a small on screen touch activated version of your home button popping up on your screen - press it to see options such as : home. if you press it then select device, you will see further options such as mute. hope this helps.. would love to know how you go...
good luck!

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

My Iphone 3gs has frozen-help me please ??

Hi there,
I'm new to the site;
And I'm in despair.My Iphone isn't jailbroken or anything like that. So this is how it begins;
I downloaded the alarm clock app on my Iphone 3gs on Tuesday evening, so I could set my alarm for the following morning, it downloaded fine. I woke up the following morning to the phone vibrating twice every 5 seconds or so and the phone was frozen on the passcode screen.
I have tried the home button/sleep button reset to no avail.
I have tried tried connecting it to itunes and doing the restore-i click the restore button but it only ends up updating which then fails due to the 3259 error code?!
I have tried doing this in the recovery mode but it still doesn't work.
I have tried searching endlessley on both google and youtube for hopeful fixes but I am beginning to loose hope?!
I have only had the Iphone two weeks as my cousin's contract expired, so I bought it off her.
If anyone could help me I would be very grateful,
Thankyou.

Either you need to update iTunes on your computer to the current version or you have firewall software that is not allowing iTunes to connect to the activation server.

IPhone 3GS silent switch, help?!

Similar Messages

Maybe you are looking for