IPhone 3GS silent switch very tight! What to do?

I need some advise!
I bought the 16gb black 3GS at full price (Factory 86 week 30)
and the screen had a ghosting effect (the kind you see on an older LCD screen with slow response times).
I swapped that out with a new one, which seems fine... So I applied the invisible shield! After letting it dry for two days I turn it on, all is well.... BUT the silent switch is really tight! I have to use a lot of force to switch it to silent and back!
What should I do? Exchange it again & lose the invisible shield? Or keep it and accept that nothing is perfect (it's better than being loose).
I would really appreciate some feedback here!

I had the same exact problem after installing the invisible shield and I think it's because some of the liquid from the invisible shield got in there. I just kept using it and to this day (3 weeks later) it's back to normal. just use it daily so it gets loose over time. Nothing to worry about

Similar Messages

  • IPHONE 3GS SILENT SWITCH TOTALLY DEAD, NO SILENT FUNCTION???

    My iPhone 3GS silent switch has been very tempermental recently, but as of last week, when I switch it onto silent, it does not do anything. No icon on the screen comes up, its just completely useless. Does anyone know what i could do to maybe bring it back? I dont want to take it apart as it could cause further problems... coule it be caused by dirt in the sliding area? I dont have any ideas. Any replies are very much appreciated!

    If I were you I would bring it into an Apple store and have them take a look at it.
    Make sure you make a Genius appointment before you go in.

  • Iphone 3gs silent switch problem  and volume rocker

    Hi so basicly my iphone 3gs silent switch is loose when switched on silent it moves a tiny bit and goes on ring etc and also the volume rocker the one to turn up is kinda pushed in but still works to make it work you have to push hard. Does anyone know how to fix? thanks! 

    Check  the tiny silver button on the left side of cell near the  top & switch it so u can't c  red dot

  • IPhone 3GS silent switch, help?!

    My iPhone 3GS silent switch seems to work fine. But when the iPhone is locked and you turn the switch from loud to silent, or the other way round, the screen doesn't wake up to tell you this has happened, whereas all the other iPhones that I've seen seem to wake up to tell you the setting has changed… don't know if there's something wrong with the phone internally or if this is a software problem. Thanks!

    If I were you I would bring it into an Apple store and have them take a look at it.
    Make sure you make a Genius appointment before you go in.

  • Iphone 3gs silent switch on/off

    my iphone 3gs silent switch goes between vibrate and loud when pressed on the front by the speaker? any way to fix this? thanks

    Check  the tiny silver button on the left side of cell near the  top & switch it so u can't c  red dot

  • IPhone 3GS silent switch doesn't silence the device

    I recently dropped my iPhone 3GS from the desk in my bedroom. I checked to see if it worked fine, and it did. No scratches or nicks.
    After that, I found that the Silent switch does not work. I flip it down and receive no notification that the phone is on silent, no on-screen & vibrate notification. So, I tested it by calling my phone from the home phone - and my iPhone 3GS rang and vibrated.
    I checked the settings and I even did a reset. Should I do a full reset (Erase All Content and Settings option)?
    Thanks much.

    If the switch was damaged with the drop, doubtful that restoring your iPhone with iTunes will resolve the problem,
    No need to to erase all content and settings with the iPhone since doing so will require syncing your iPhone with iTunes afterwards, and is a secure erase which will take an hour or two.
    You can try restoring your iPhone with iTunes from your iPhone's backup - sync your iPhone with iTunes immediately before to update your iPhone's backup and any data that is kept synchronized. If no change after that, the next option is restoring your iPhone as a new iPhone or not from your iPhone's backup.

  • IPhone 3GS Silent Switch

    I dropped my iPhone 3GS yesterday and the silent switch no longer works. I have had the iPhone for about 14 months now, so my warranty has expired. I don’t want to go paying ‘big money’ just for a silent switch.
    Are there any apps out there which allow the mute on/off to be controlled?
    Has anyone else had this issue? And fixed without apple support?
    Really missing this function. Can anyone help???

    No apps can do that. Google for iPhone repair in your area... there's likely one that can fix it.

  • IPhone 3GS silent switch broke covered in warrenty?????

    Hi, my iPhone silent switch broke off during normal
    use. Am I covered under my warrenty?

    You'll need to make an appointment at the Genius Bar - http://apple.com/retail/geniusbar and let them decide.

  • IPhone 3Gs silent switch (Probable water damage)

    Hi there,
    After it spent about 20 minutes in a less-than-waterproof pocket during some heavy rain, I've been having problems with my iPhone. The silent switch seems to not work properly, I can turn it on to silent alright, and it'll happily stay there. But if I want to flick the switch back to "ring" mode, then the switch works fine, but it doesn't change mode. Sometimes I will see the bell show up on the screen, and it'll stay on ring mode for a few minutes, but then it'll put itself back onto silent mode. Also, if the switch isn't on silent mode then it will sometimes spend up to 10 minutes at a time constantly switching between silent and ring mode. As it vibrates each time it does this, it is getting annoying. Especially as it does this during the night if I forget to put it on silent, and this wakes me up!
    I accept the fact that it was most likely the water damage that did this, but is there a way I can fix it? I've had friends who have put their iPhones through much worse treatment and they've come out of it alright. I have also tried doing a full factory reset, but this didn't help.
    Thanks in advance to anyone who can help.

    If I were you I would bring it into an Apple store and have them take a look at it.
    Make sure you make a Genius appointment before you go in.

  • My iphone 3gs battery drains very fast

    my iphone 3gs battery drains very fast it won't last for whole day
    i just uses mail application and  facebook for some time
    can u tell why the problem is or need to change battery

    I'm having the same problem with my 3Gs.  In my case it is not the apps int he background or the brightness, or wifi or email push.  The folks at the apple stroe tell me that there is some software glitch that shows up every few months.
    I can only get rid of it by restoring my phone as a new device.  In which case I lose all of my contacts, settings and all data.  VERY frustrating. I had recived two new phones (before applecare ran out) and have done the resotre several times.  No one can tell me what is in that creates this probelm.  I've tried differenet chargers one by one in case they are the probelm.  one int he car, one in a kitchen outlet, one at my home computer (sync) and on at my office computer (non-sync). 
    Problem just showed up again randomly two days ago,  no new apps or hardware.  battery drains from full to 0 in two hours.
    Apple, please fix.

  • HT201210 No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??

    No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
    The Home and Sleep buttom does only promt the Connect to itunes...
    Have closed down anti V and is admin and so on.....
    Regards Martin

    Hello mftoby,
    Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
    This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/TS3125
    Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
    Thanks,
    Matt M.

  • HT4972 I upgrade my phone via itune and now i got the msg on my phone "activating your iphone in 3 minutes......could not activate your iphone" i've iphone 3gs. Can somebody suggest what am i suppose to do to make it work

    I upgrade my phone via itune and now i got the msg on my phone "activating your iphone in 3 minutes......could not activate your iphone" i've iphone 3gs. Can somebody suggest what am i suppose to do to make it work

    Read the article below:
    iPhone: Troubleshooting activation issues

  • Iphone 3gs keeps switching off during phone call showing apple logo

    My iphone 3gs keeps switching of during phone calls. The apple logo appears and I have to wait until it switches itself back on, this happens without my help, any ideas please

    Try restoring the iPhone. If a normal restore doesn't work, try setting it up as a new device.

  • Iphone 3gs silent button

    HI, The silent button of my iphone 3GS is not working, the phone does not vibrate nor does it go on silent
    any idea how I can fix it?

    well if the switch isnt working then what i would do is restart, reset, and then restore the iphone if that doesnt work it is hardware and if your within your limited hardware then it can be replaced  for free

  • IPhone ring/silent switch doesn't work.

    Weird problem. My colleague has an iPhone 3G which worked fine for over a year. But recently it developed a problem, its ring/silent switch doesn't really do anything. Earlier it showed an image on the screen notifying the change of mode. But now nothing happens.
    The phone was not dropped and was not exposed to any shock as it is permanently kept on his desk, he never takes it anywhere (yes, even I find that weird ).
    What could be the problem? He's very worried. Can someone help please?

    hi there,
    hope your problem is sorted but if not you could  try the following tip i posted to a similar question:
    for anyone who's iphone buttons (hardware) are not working, there is something you could try w/out taking your phone apart.
    go to settings --> general--> accessibility-->turn on assistive touch
    this results in a small on screen touch activated version of your home button popping up on your screen - press it to see options such as : home. if you press it then select device, you will see further options such as mute. hope this helps.. would love to know how you go...
    good luck!

Maybe you are looking for