IPhone 3GS Silent Switch

I dropped my iPhone 3GS yesterday and the silent switch no longer works. I have had the iPhone for about 14 months now, so my warranty has expired. I don’t want to go paying ‘big money’ just for a silent switch.
Are there any apps out there which allow the mute on/off to be controlled?
Has anyone else had this issue? And fixed without apple support?
Really missing this function. Can anyone help???

No apps can do that. Google for iPhone repair in your area... there's likely one that can fix it.

Similar Messages

Iphone 3gs silent switch problem and volume rocker

Hi so basicly my iphone 3gs silent switch is loose when switched on silent it moves a tiny bit and goes on ring etc and also the volume rocker the one to turn up is kinda pushed in but still works to make it work you have to push hard. Does anyone know how to fix? thanks!

Check the tiny silver button on the left side of cell near the top & switch it so u can't c red dot

IPhone 3GS silent switch, help?!

My iPhone 3GS silent switch seems to work fine. But when the iPhone is locked and you turn the switch from loud to silent, or the other way round, the screen doesn't wake up to tell you this has happened, whereas all the other iPhones that I've seen seem to wake up to tell you the setting has changed… don't know if there's something wrong with the phone internally or if this is a software problem. Thanks!

If I were you I would bring it into an Apple store and have them take a look at it.
Make sure you make a Genius appointment before you go in.

Iphone 3gs silent switch on/off

my iphone 3gs silent switch goes between vibrate and loud when pressed on the front by the speaker? any way to fix this? thanks

Check the tiny silver button on the left side of cell near the top & switch it so u can't c red dot

IPHONE 3GS SILENT SWITCH TOTALLY DEAD, NO SILENT FUNCTION???

My iPhone 3GS silent switch has been very tempermental recently, but as of last week, when I switch it onto silent, it does not do anything. No icon on the screen comes up, its just completely useless. Does anyone know what i could do to maybe bring it back? I dont want to take it apart as it could cause further problems... coule it be caused by dirt in the sliding area? I dont have any ideas. Any replies are very much appreciated!

If I were you I would bring it into an Apple store and have them take a look at it.
Make sure you make a Genius appointment before you go in.

IPhone 3GS silent switch doesn't silence the device

I recently dropped my iPhone 3GS from the desk in my bedroom. I checked to see if it worked fine, and it did. No scratches or nicks.
After that, I found that the Silent switch does not work. I flip it down and receive no notification that the phone is on silent, no on-screen & vibrate notification. So, I tested it by calling my phone from the home phone - and my iPhone 3GS rang and vibrated.
I checked the settings and I even did a reset. Should I do a full reset (Erase All Content and Settings option)?
Thanks much.

If the switch was damaged with the drop, doubtful that restoring your iPhone with iTunes will resolve the problem,
No need to to erase all content and settings with the iPhone since doing so will require syncing your iPhone with iTunes afterwards, and is a secure erase which will take an hour or two.
You can try restoring your iPhone with iTunes from your iPhone's backup - sync your iPhone with iTunes immediately before to update your iPhone's backup and any data that is kept synchronized. If no change after that, the next option is restoring your iPhone as a new iPhone or not from your iPhone's backup.

IPhone 3GS silent switch very tight! What to do?

I need some advise!
I bought the 16gb black 3GS at full price (Factory 86 week 30)
and the screen had a ghosting effect (the kind you see on an older LCD screen with slow response times).
I swapped that out with a new one, which seems fine... So I applied the invisible shield! After letting it dry for two days I turn it on, all is well.... BUT the silent switch is really tight! I have to use a lot of force to switch it to silent and back!
What should I do? Exchange it again & lose the invisible shield? Or keep it and accept that nothing is perfect (it's better than being loose).
I would really appreciate some feedback here!

I had the same exact problem after installing the invisible shield and I think it's because some of the liquid from the invisible shield got in there. I just kept using it and to this day (3 weeks later) it's back to normal. just use it daily so it gets loose over time. Nothing to worry about

IPhone 3GS silent switch broke covered in warrenty?????

Hi, my iPhone silent switch broke off during normal
use. Am I covered under my warrenty?

You'll need to make an appointment at the Genius Bar - http://apple.com/retail/geniusbar and let them decide.

IPhone 3Gs silent switch (Probable water damage)

Hi there,
After it spent about 20 minutes in a less-than-waterproof pocket during some heavy rain, I've been having problems with my iPhone. The silent switch seems to not work properly, I can turn it on to silent alright, and it'll happily stay there. But if I want to flick the switch back to "ring" mode, then the switch works fine, but it doesn't change mode. Sometimes I will see the bell show up on the screen, and it'll stay on ring mode for a few minutes, but then it'll put itself back onto silent mode. Also, if the switch isn't on silent mode then it will sometimes spend up to 10 minutes at a time constantly switching between silent and ring mode. As it vibrates each time it does this, it is getting annoying. Especially as it does this during the night if I forget to put it on silent, and this wakes me up!
I accept the fact that it was most likely the water damage that did this, but is there a way I can fix it? I've had friends who have put their iPhones through much worse treatment and they've come out of it alright. I have also tried doing a full factory reset, but this didn't help.
Thanks in advance to anyone who can help.

If I were you I would bring it into an Apple store and have them take a look at it.
Make sure you make a Genius appointment before you go in.

Iphone 3gs keeps switching off during phone call showing apple logo

My iphone 3gs keeps switching of during phone calls. The apple logo appears and I have to wait until it switches itself back on, this happens without my help, any ideas please

Try restoring the iPhone. If a normal restore doesn't work, try setting it up as a new device.

Iphone 3gs silent button

HI, The silent button of my iphone 3GS is not working, the phone does not vibrate nor does it go on silent
any idea how I can fix it?

well if the switch isnt working then what i would do is restart, reset, and then restore the iphone if that doesnt work it is hardware and if your within your limited hardware then it can be replaced for free

Iphone ring/silent switch has stopped working

My iphone 3gs ring/silent switch has stopped working, whenever i switch it over to silent, it vibrates but then flickers between ring and silent and then ends up staying on ring, even when it is in the silent position. HELP!

Have you dropped your phone? Is it still under warranty? Does sound like a physical hardware issue, and I doubt anyone here can help further than telling you to make an appointment at a genius bar and get it fixed or replaced if allowed.

IPhone ring/silent switch doesn't work.

Weird problem. My colleague has an iPhone 3G which worked fine for over a year. But recently it developed a problem, its ring/silent switch doesn't really do anything. Earlier it showed an image on the screen notifying the change of mode. But now nothing happens.
The phone was not dropped and was not exposed to any shock as it is permanently kept on his desk, he never takes it anywhere (yes, even I find that weird ).
What could be the problem? He's very worried. Can someone help please?

hi there,
hope your problem is sorted but if not you could try the following tip i posted to a similar question:
for anyone who's iphone buttons (hardware) are not working, there is something you could try w/out taking your phone apart.
go to settings --> general--> accessibility-->turn on assistive touch
this results in a small on screen touch activated version of your home button popping up on your screen - press it to see options such as : home. if you press it then select device, you will see further options such as mute. hope this helps.. would love to know how you go...
good luck!

Iphone 3gs not switching on or connecting to itunes

Hi my iphone 3GS will not go past the apple logo when switching on. Have tried to connect to itunes to do a restore but itunes not recognising my phone. It worked fine a few hours ago until I needed to turn it off. Any suggestions gratefully received. Many thanks

Hi Helski242,
Let's see if we can isolate this issue further, I'd like you to try to restore your device with iTunes. If you are unable to do so, you may need to place the iPhone into recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
You may experience one of the issues listed below with your iPhone, iPad, or iPod touch when you attempt to update or restore. If any of these occurs, you can place the device into recovery mode and attempt to restore the device again.
- Device continually restarts but never displays the Home screen.
- An update or restore did not complete and the device is no longer recognized in iTunes.
- Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
If you continue to have issues with iTunes recognizing your iPhone, see Step 5 "If the device is not recognized while in Recovery Mode" of this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

IPhone 4 silent switch crooked ( when partially moved ) and pretty easy to trigger

Hi. I just bought my new iPhone 4 black .. Right out of the box... My iPhone 4 had the silent switch a little bit "loose" I think.. When I partially "touch" with my nail.. The silent switch looks "crooked" .. And it goes back to its initial position .. When I do the same thing. And I don't know if it's OCD.. But my silent switch it's PRETTY easy to trigger.. Not to easy.. But I saw some iPhone 4's which has a very sturdy silent switch.. And they needs a lot of pressure to change between "silent and loud" . What's your oppinion? . I don't want it to break in the future... what do you think? . I'm to OCD or it's a major problem?
Sorry for my bad english.. btw

stevenkps wrote:
thx for replying... but it doesnt work... i turned the app on and made sure all vibrating stuff are on... then i tap ( or even smack ) the right hand corner ... its still not even vibrate once...
You may have to try this several times. If it fails to work after several attempts then I'd return it for one that works properly. There's been several threads regarding this procedure that has been successful including me. However it may not work in your case and a return is the only option. In fact I did return mine for other reasons though and then repurchased again for my wife and I in late July with absolutely no problems.
Good Luck!

IPhone 3GS Silent Switch

Similar Messages

Maybe you are looking for