IPhone 3GS stuck in a black screen with a cable and the iTunes logo in it. Extra bonus: error 1656.

So, I got this problem with the black screen with a cable and the iTunes logo in it. I tried restoring it, but in the middle of the process, the iPhone turns off (and it is still connected to the computer) and I get an error message (1656). I already tryed the solution that I have to find the "hosts" file, but there's no "gs.apple.com" line to be deleted.
What do I do?

I tried to do this at least 4 times! the iTunes is running the restore but at the end he's failed.. he say there is an error ! I think number -1.

Similar Messages

  • My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    I have had a 3GS for 2+ years.  After upgrading to IOS 4 (now 4.3.5) I began having problems.  In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that!  I connected to itunes and it did restore from a backup but it is a major inconvenience.  I am also searching for answers, but better back-up regularly!

  • HT6154 Just tried to install the new update to my iPhone 5S and now it is stuck trying to communicate with iTunes and will not be recognized ny the laptop. iPhone screen shows a cable and the iTunes logo. Using Windows 7 Ultimate. How do I reset this to f

    Help!!!
    I now have a brick for a phone. Just tried to update to 7.1.1 using iTunes and it wipred out the operating system OK but now will not communicate with iTunes or the laptop. I reloaded iTunes and still no luck. If I press and hold the power and home buttons it inly comes up to the same screen showing the lightning cable pointing to iTunes logo. How can I get this running again? Even a factory reset to start would help if possible then I can do a restore. Right now it is worthless.

    Hello HarbourStables,
    Thank you for the details of the issue you are experiencing with your iPhone 5s.  I would be concerned too if my iPhone was stuck in recovery mode and not recognized in iTunes so that you can restore it.
    I recommend the following article for the issue you described and specifically this step:
    5. Use iTunes to restore your device.
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Find the full article here:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT4623 I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    Press the Power button and hold it down until the computer turns off. Restart. Do you still get the same result? If so, then try booting into Safe Mode, then restart normally. A safe mode startup takes considerably longer than a normal one, so don't panic. You will also see a progress bar at the beginning.

  • My iphone will not do anything and it has a picture of the usb cable and the itunes logo on the screen

    my will not do anything and it has a picture of the usb cable and the itunes logo on the screen

    Your iPhone is telling you you need to restore it using iTunes on a computer. Follow the instructions below.
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • My screen on the touch is frozen. the screen shows a usb cable and the itunes logo above it. How can I get it back to the main screen?

    My screen on the touch is frozen. the screen shows a usb cable and the itunes logo above it. How can I get it back to the main screen

    The screen is telling you to connect the iPod to a computer with iTunes via the USB cable.  iTunes should open and give you instructions.  If not, open iTunes and retore the iPod via iTunes.

  • TS1363 while updating my IOS to IOS 6 the updating process couldn't be completed for unknown reason and my iphone has nothing but a black screen with an apple and a meter that shows no progess. it completely froze!

    When updating my IOS 5.1.1 to IOS 6 and after the download completed the updating of the iphone couldn't be completed for unknown error and the device froze and all i have now is a black screen with an apple and a meter that shows no progress I can't switch off my iphone or do anything!!!

    Hi,
    I had a similar problem last week with my nice shiny 3 week old iPhone 6. I noticed the Apple logo was on the screen, but it did not progress like a normal boot up. I restarted the phone, and it showed the Apple logo, then a red screen then cycled back to the logo and kept looping. I got the phone to the iTunes connection stage by keeping hold of the power button and the home button until the apple logo appeared then kept holding the home button. iTunes recognised the phone, and wanted to restore, but this was unsuccessful  because the phone would keep looping to the red screen and iTunes failed. After loads of Apple support, I was told it was a hardware failure, and like you I live more than an hour away from the store. None the less, I made an appointment with the Genius bods, and they replaced the phone. They said they had never heard of the problem, but really, take a look at these forums and you will see that it is a common problem and I suspect they are keeping it under wraps...
    My issue is that as a disappointed customer with faulty goods, why should i have to stick to an appointment to get it replaced? What other store would you have to do this?
    The "Genius" didn't even want to see the phone powered up before offering a replacement... Oh, and it turned out they didn't have the exact same model as a replacement so they were going to send me out of the store empty handed.... I kicked off BIG time, and they very reluctantly gave me a phone from the sales stock, rather than the repairs stock..
    Not a happy Apple customer anymore, and I feel the more people who know about the lack of service and customer care the better. They need to get off there high horse and join the real world!

  • I just bought an ipad and when I tried to update itunes ios and I pluged the ipad into my computer and opened itunes.  It started to install and then said there was an error, now my ipad has a screen the has the usb cable and the itunes logo on the front

    I can't open my ipad now.  It is stuck with the picture of the usb cord and the itunes logo on the front.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • I bought a used I pod touch 4, I deleted previous settings, now I just have a screen with a picture of the USB cable  and  the itunes logo.  What do I do?

    I bought a used Ipod touch, was supposedly factory refurbished, and it worked when I first used it.  Then I noticed the previous owners User ID on the Apple log in and thought i should delete all info and start clean.  I hit the delete button, Now all I get on the screen is a picture of the usb cable and above it the itunes logo.  What do i do now?

    Connect it to your computer, launch iTunes.
    Right or control click the iPod under Devices left side of the iTunes window.
    Click: Sync
    If you want, you can rename the device. Double click the iPod under Devices. Type in a name.

  • HT2499 I ejected ACDs from my Mac Pro DVD player and now there is just a black screen with DVD player and the Apple insignia the bottom right corner. I can't get anything to turn on and shut this down. Got stuck. What do I do?

    On my MacBook Pro I finished using a CD and it ejected. Then I have a black screen just a DVD player showing on the bottom of a black screen. I can't do anything with my cursor at all nothing opens up and I don't know how to get that off the screen and start using the computer again – thanks for any help you can give me

    Hi there,
    You may need to force quit the application. Take a look at the article below for more information.
    Mac OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    -Griff W.

  • My iphone 4 is locked on a black screen with apple symbol and loading sign since last night, how do i fix this?

    my iphone 4 is locked on black screen with apple symbol and loading symbol since last night

    You need to restore the iOS using iTunes. Place the device into Recovery Mode and Restore the device
    Read here for instruction > http://support.apple.com/kb/HT1808

  • HT1430 I cannot switch my phone off as it is stuck on a black screen with a circle going round

    I cannot switch my phone off as it is stuck on a black screen with a circle going round as if it is going on to the next screen, I cannot seem to chnage it off this screen.  i also will not connect to itunes with an unknown error 0xE800065.  Any ideas???

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • My ipod touch 4 gen. has a black screen with a apple and under it is a load bar that is empty and wont load

    my ipod touch 4 gen. has a black screen with a apple and under it is a load bar that is empty and wont load

    Try here:
    iPhone and iPod touch: Frozen and unresponsive
    iPod touch: Hardware troubleshooting

  • My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.

    My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
    My phone is completely disabled, what can i do ?

    Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Cannot send email to Yahoo from Macbook Pro

    Just started yesterday.   I have Yahoo mail Plus and all has been fine for 3-years. Outside of about a week ago my incoming mail to the Mac Book Pro stopped working (out going was fine). Lot's of posts here about that and then on Friday night it it s

  • Using Gui_download for excel output

    Hi, I am using gui_download to output in excel format, my requirement is i want to start records from 3rd row in excel. On first row first column title shoud come? Second row blank,  i used fieldname for header in export paramenter from 3rd row. Plz

  • Virtual Machine Additions in Virtual PC for Mac 7.0.2

    I'm also new to Virtual PC for Mac and will try some of the suggestions for speeding it up; it is painfully slow. However, I have another but related question. I keep getting a prompt when I boot Windows XP Prof. and it opens Virtual. It tells me tha

  • IWeb Page Crashes IE

    For whatever reason, one of the pages on my web site (created with iWeb) is crashing visitor's Internet Explorer. Every other page on the site works fine. I'm going crazy here...Any help would really help. The site is futureslopedesigns.com The page

  • Extraction from R/3 extractor to flat file

    Hi, I want to be able to extract data using r/3 extractors (LIS/Business Content extractor) into r/3 itself loading the data into a transparent table or loading the data into a flat file on the application server. As an example, i want to extract dat