IPhone 3GS stuck on activation screen after updating to iOS 6.13

Hi!
I have updates my iPhone 3GS to iOS 6.13 and it got stuck in the activation mode.
I went to see Apple Genius and was told that my phone has locked itself to O2 simcard only.
I contacted O2 and my iPhone has just been unlocked.
however, when I try to finish the activation it still keeps failining with the message when I use WiFi:
"could not activate iPhone, your iPhone could not be activated because the activation server is temporarily unavailable."
When I try through iTunes, it says: "we're sorry, we are unable to continue with your activation at this time"
Next available appointments at near apple stores are only mid-week..
any advice on what should I do?
I tried restoring it (held lock button until logo came up), but it keeps taking me to activation screen.
any help would be much appreciated...

Is there a SIM in the device?  A SIM is required for activation.
The most common reason for activation issues is due to the device being hacked or jailbroken.  If this is the case, no support can be provided here and Apple will not touch the device.

Similar Messages

  • The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help iPhone 3GS, iOS 6

    The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help
    iPhone 3GS, iOS 6

    Your iPhone was "unofficially" unlocked by some means to work with a different carrier. Now that you have updated it has relocked to the original carrier. If you do not know who the original carrier was you will need to call AppleCare and give them the model and serial number of your iPhone. Then you will need to contact that carrier to see if they have a process to unlock the phone and if you qualify.

  • Iphone 3gs stuck in black screen after restoring to new os

    Hi
    I had my 3gs running at 4.2.1 and I wanted to update my os recently.. since my itunes is kinda old it was able to get 4.3.5 after updating and restoring the
    phone goes back to the DFU mode(just black screen). But Itunes detects it that it is in recovery mode and to restored.. tried a hundred times and failed
    Please help

    Is there a SIM in the device?  A SIM is required for activation.
    The most common reason for activation issues is due to the device being hacked or jailbroken.  If this is the case, no support can be provided here and Apple will not touch the device.

  • Iphone 3GS stuck on Activation screen

    I tried to restore my iphone to factory settings and now I am stuck at the activation screen. The message reads"Your Iphone could not be activated because the activation Server is temporarily unavailable. Try connecting your iphone to iTunes to activate or try again in a couple of minutes". I am going on 3 days now. The phone is connected to my computer. Itunes is open but there is no indication that the iphone is connected. Apple support told me via email to uninstall itunes and re-install it. I did but the result is the same. When I try to restore/activate it appears to process and the following mesage appears" It may take up to 3 minutes to activate your iphone" but after the time expires it goes right back to the message above. When I hold down the home button, Emergency Call, Start Over, WiFi Settings and Cancel buttens appear. Nothing else works with or without the SIm card removed. Currently only my Wifi connection seems to register. can you help?

    First, try disabling your antivirus and firewall, then try again. If that fails:
    Open the hosts file on your computer and delete any lines that contain gs.apple.com.
    Windows - c:\windows\system32\drivers\etc\hosts
    Mac - /etc/hosts
    It is a hidden file, so you will have to view hidden files to see it.

  • Iphone 3gs stuck at loading screen after reset all data

    I bought my iphone 3gs about an hour ago and to have my privacy i reset first the network and next i reset all my data then it restart and now its still at the loading screen about 1hr. Thank u for the help!

    Hello KylaAquino,
    It sounds like you are unable to boot your iPhone successfully after performing a Reset All content and Settings. I recommend first attempting to reset the device in this manner:
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From: Turn your iOS device off and on (restart) and reset
              http://support.apple.com/kb/ht1430
    If that does not get you booted to the setup screen, I would next try putting the phone into recovery mode, and attempting a restore with iTunes. This article will help you with that:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Iphone 5s stuck at activation screen after restoring to factory setting

    I had deleted my Apple ID and created one same Apple ID again. After i restored my iphone to factory setting, it stuck at the activation screen, even if i filled in the correct Apple ID and password, it shows "cannot use this Apple ID to unock this phone'. Seek for help.

    You need the AppleID and passcode used to originally activate the iPhone.
    This is a new security feature in iOS7 called Activation Lock. There is no
    workaround.
    Without the AppleID and passcode used to activate the iPhone, it will be useless
    to you and everyone else.
    If it is only the passcode that you forgot, try here:
    how to reset password:
    https://iforgot.apple.com/password/verify/appleid

  • My iPhone 4S is stuck in iTunes screen after updating to iOS 7, what can I do?

    Hi everyone
    I updated iTunes to latest version.
    Connected my 4s to iTunes and started the update to iOS 7.
    Took a few minutes and in the end it gave me an error, dying the iPhone could not be updated for an unknown reason.
    Now the iPhone screen shows "connect to iTunes" and I can't get it out of there!
    Tried pressing both home and start buttons to no avail, won't do anything.
    Help please!

    It worked the second time! At first I reinstalled iTunes (left the 'open right now' option checked) and when I connected the iPhone nothing happened. Then I unninstalled it and reinstalled it again (this time not leaving the open right now option checked) and as soon as I connected my Iphone Itunes openned  and detected it.
    Thanks so much for your help !!
    I suggest to anyone with the same problem to try this method first, the method described in the link DOES NOT WORK.

  • IPhone 3gs battery consumption very high after updating to IOS 6

    HI,
                 After updating my iphone 3GS to ios 6,battery consumption is very high.I observed this changes in my iphone 3gs after updating my iphone 3gs to IOS 6.

    Is there a SIM in the device?  A SIM is required for activation.
    The most common reason for activation issues is due to the device being hacked or jailbroken.  If this is the case, no support can be provided here and Apple will not touch the device.

  • IPhone 3GS stuck in recovery mode while updating to iOS 6.1

    Hello there, I was updating my iPhone 3GS(New Bootrom) from iOS6.0 to iOS 6.1. While it was updating, iTunes suddenly ends up saying error and now my iPhone is stuck in recovery mode loop. I've tried DFU mode on my iPhone and try to kick it out by using TinyUmbrella but the computer doesn't reconize it. And when it was on recovery, iTunes doesn't reconize too, a window pops up and says i have to install 'Apple Mobile Device'. I've re-install and install iTunes a couple of times and nothing is working. Switching on and off the iPhone doesn't work too. Please, someone help me with this problem! I really do not know what to do! Please reply this As Soon As Possible!

    Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
    Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
    The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
    The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
    Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
    I had another problem and that was...
    Error 1603 and 1604 : These are USB driver connectivity problems.
    Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
    Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems.

  • Iphone 3gs stuck at emergency screen after 4.01 update

    1st of all i would like to say sorry if this has been posted before.. i did a search and it turns out to be a gazillion hits... no time to search all of them.
    i bought the iphone from malaysia last week.. and the ppl activate it while it was still on 3.1.3 firmware..now im back in my country ( Brunei Darussalam) and ive update it to 4.01.. and now im stuck at the emergency call screen.. it wont activate with itunes as it stated the sim is not supported...
    if anyone knows how to overcome this please do tell... thanks..
    p/s never been jailbreak before...

    The device was jailbroken when you purchased it most likely.
    When you did the upgrade, it relocked to the original carrier.
    The solution now is:
    1)Sell it and buy an iPhone intended for your country.
    2)Jailbreak it.
    3)Contact the carrier it was originally intended for and see if they offer unlocking.

  • Iphone 5 stuck on loading screen after update. Need help!

    So I lacked space on my phone to update to iOS8 via WiFi so I attempted to via desktop.
    Seemed to be working well until I got to a loading screen on iTunes saying "Restoring iPhone Software".
    Phone is also on loading screen and has reached roughly 1/10 of the way then stopped.
    Tried unplugging it multiple times and it ends up doing the same thing.
    I just want my phone to work without having to take it in to an Apple Store.
    Any suggestions on how to fix it?

    Probably should have left it alone.  Sometimes it will act as though it is frozen but it is still updating.  May have to do a DFU restore.  Hope you have a backup.
    DFU mode to Restore

  • TS3694 iphone 3gs stuck in recovery mode after updating to 6.13 baseband 6.15

    i have updated my phone from IOS 5.1.1 to 6.13 via itunes. the phone will not activate i keep getting message unable to connect to sever.

    Call AppleCare and give them the model and serial number of your iPhone and tell them you only want to know the name of the cell provider it is locked with. Then contact that cell provider and see what their official unlock policy is and if you qualify.

  • My Iphone 3GS is in restore mode after updating to IOS 4.3

    I need help I was trying to update my IP 3GS and now i'm stuck in restore mode is there a way to fix it with out losing my contacts?

    Check this out:
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • Need Urgent Help! iPhone 3Gs won't detect SIM after update to ios 6.1.3

    So yesterday me and my sister's phone was working fine. I decided to update both of them, and when I updated, everything was reset to factory settings. Everything is running smoothly, but our phones won't detect the SIM. Either it says "No Service" or "Invalid SIM" when I turn on Airplane Mode. Urgent, please help!

    I performed a backup / full reset / erase all / restore. When the phone rebooted, it appeared to be a clean, new iPhone (unnamed, no apps, no wallpaper, etc). I restored my backup and the notification is still there. I tried doing a hard reboot (home+off buttons), still there.  I will attempt one more reset / erase / restore.

  • Iphone 3g Hangs and stucks at activation Screen on update to OS 3.0

    Hello Friends,
    My Iphone 3g Hangs and stucks at activation Screen on update to OS 3.0.
    I updated the phone to OS 3.0 last night and to my surpsrise after the OS Completely installs and restarts the phone,the phone then hangs and all i can see is a black screen when the phone is connected to PC.
    As soon as i disconnect, it shows the Itunes-PC Connect image asking for activation.
    Again if a connect back,it hangs and keeps on restarting ..over and over again.
    i tried everything:
    1) Re-Install Itunes 8.2
    2) Re start OS
    3) CHnage USB Cable
    4) Change PC
    5) Keep the phone connected for around 4 hours expecting some miracle to happen still no use.
    ** If i try to donwgrade back to 2.2.1 then it givess error to and not able to downgrade.
    Now i have put myself in a situation wherein i had to switch to other phone.
    The phone is just getting rust as there is no Support/Care center in India.
    Please someone help me out.
    Atleast let me know :
    Is any hardware part involved in activation of phone?

    Close iTunes and unplug iphone
    Search web and download the 2.2.1 ipsw file.
    Go to device manager on PC and delete the USB option for Apple under the hardware options.
    Reboot PC
    Plug in iphone and wait for dreaded connection picture
    hold power button and home button until apple logo appears
    continue to hold home button and release power button until connection picture appears again
    Your PC should now find the iphone in recovery mode
    Now open iTunes and it will prompt you to restore
    Hold the shift button on the keyboard and click the restore button at the same time
    This will allow you to browse for the correct ipsw file
    select the 2.2.1 file that you downloaded
    your iphone will now restore
    Once completed, you will need to resync
    Now you are back to square one but at least have a phone that works
    Now make an appt at the Genius Bar and make them update it for you
    Mine is scheduled for next week

Maybe you are looking for

  • Startup open ORA_12514 error after Shutdown, just upgraded 9i to 10g

    Hi, Noobe here, again! Cheers and happy New Year to all! How should I edit script to start db that has been shutdown prior to backup? We are having a problem with backups, failure is occurring executing SQL*Plus startup after shutdown. I successfully

  • Video Transition Error Help...

    Hi. The clip what i work is mont format, i have fixed in motion. I have rendel that back in final cut and now i whant to but middle in two clip addictive dissovelve effect but i get X in the video transition like this http://www.insertxox.com/finalcu

  • Where did the print setting "Rewrap message to fit" go in Mail 7?

    Where did the print setting "Rewrap message to fit" go in Mail 7? All text prints too small. Settings for font size haven't changed and the emails print out much smaller than the view settings. I don't see the options for "Rewrap message to fit" or "

  • Inconsistent results from CallableStatement

    We are getting inconsistent results from a call to an Oracle database. We have a CallableStatement that returns 4 INTEGERs. It runs perfectly if I run the Oracle procedure directly from the sql command line and then call it from the java code. Howeve

  • Relation between a datafile and segments.

    Hi All, I am trying to understand the storage concepts of oracle. I read that 1. Tablespace is a logical grouping of datafiles 2. Segments are made up of Extents and Extents are composed to DB Blocks which are logical grouping of OS blocks. But I am