Iphone 3gs stuck on plug into itunes screen after trying to restore get error 1015

i have a iphone 3gs 8gb that was jb and unlocked by the previous now the phone froze and its stuck and i tried the hard reset and now its stuck on the connect to itunes screen how can i fix it?

Manny,
You will need to get help for your problem on another forum.  By jailbreaking your phone, you've voided your warranty and eliminated the ability to get help from Apple or from any of Apple's forums, including this one.
Terms of Use of this forum prohibit the discussion of jailbroken phones.  You will need to search elsewhere for assistance; know that there is a strong liklihood that you will never get your phone working again.  Hope the jb was worth it.
Good luck.
GDG

Similar Messages

  • IPhone 4: My IPhone keeps in the "plug-into-iTunes-screen" after trying to update to iOS 5.0. The phone is not showing up as a device in iTunes anymore.

    My IPhone doesn't turn on and keeps in the "plug-into-Tunes-screen" after update to new IOs 5.0 yesterday. I also tried to restore it, but it still keeps in the plugin mode. In ITunes the IPhone doesn't show up as a device anymore, but Windows 7 detects it as a camera. I started the problem diagnose via ITunes and it says "iPhone can't be found".I'm using the new version of iTunes.
    Can anyone help me?

    I have the exact same problem and have just logged on here to see if anyone can help also?  My iphone is up and working but itunes won't recognise it as a device... just updated itunes aswell.
    Any help would be hugely appreciated!!

  • Iphone 3GS 32gb stuck on plug into itunes screen after trying to update OS

    I installed itunes on my new computer.  When I plugged in my iphone to sync, itunes identified my phone and offered an OS update.  I followed the steps to update and began the process, shortly after there was an error message and now I my phone is paralyzed with the "plug into itunes image".  I tried re-plugging the phone into itunes but it will no longer show up.  Any ideas?

    I had the same problem after updating...I thought that was my phone's problem, so I restored it...unfortunately, i had forgotton my password...I need that password to restore my iphone back up.
    Any idea how to recover this password.... Thanks much

  • IPhone is stuck on plug into iTunes screen

    I plugged in my phone to iTunes last night so that I could update it over night, but when I got up this morning it was on the plug into itunes screen. My phone has been stuck of the plug iTunes screen for a couple hours now. I tried turning it off and back on again, but every time i do that it returns back to the "plug into itunes" screen. I have tried plugging it into iTunes atleast 10 times, and nothing happens on itunes. It doesn't show that there is a device being connected. I don't want to lose all my data because I haven't backed it up yet... If any has any way of fixing this please let me know, I really need it to work. Thanks.

    OK so I went to the Apple store and he managed to restart my iPhone by putting it into "recovery mode". I just Googled how to do this as I wasn't there when he did it..
    Disconnect the USB cable from your iPhone, but leave the other side connected to your Mac or PC
    Launch iTunes
    Press and hold down the Home and Sleep/Power button on the top of the iPhone to turn off the iPhone
    Press and continue to hold the Home Button while you reconnect the USB cable to your iPhone, this will cause the iPhone to turn on
    Continue to hold the Home button until an alert message in iTunes informing you that an iPhone in recovery mode has been detected, like the screenshot below:
    Your iPhone is now in recovery mode. If you have not launched iTunes, you will see the familiar screen of the USB cable pointing at the iTunes logo signaling to connect the iPhone to iTunes to start recovery.
    Once you’re in recovery mode, you can either restore the iPhone or adjust the firmware as necessary.
    After restoring or upgrading firmware, your iPhone will automatically reboot and exit recovery mode on it’s own.
    It seems you will also need a wifi connection to complete the recovery mode.
    TIP: If you have backed up your iPhone, click the "restore from iTunes back up" (last option) so when you plug it back in, it will restore from your back up instead of restoreing it to the original factory setttings.
    NOTE: The above was really hard for me to get working so good luck! I tried a number of times and didn't get any message in iTunes but got my iPhone into what i assume is the "recovery mode". I'm still trying to get access a wi-fi connection to see if this will work but I will post another update once I can give it a go!
    Good Luck! And let me know if anyone successful!

  • Iphone is stuck on "Plug into ITunes screen" - I need help

    The battery on my iphone died. When I recharged it the phone became stuck on the "Plug into ITunes screen" - like when first activating the IPhone. When I plug the phone into ITunes nothing happens.
    Can anyone give me any suggestions or tips on how to fix this?

    You're responding to a post more than 2 years old. Your phone is in recovery mode. Follow these instructions:
    Use iTunes to restore your iOS device to factory settings
    If you can't update or restore your iPhone, iPad, or iPod touch

  • Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" after trying to update to iOs 5.1 and receiving error (1).

    Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
    Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
    Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?

    From iPhoneWiki:
    Try changing the USB port (the back one of chassis is better) and restart computer.
    The installed version of iTunes may also be too old. Update iTunes.
    Also put your iPhone in DFU mode when doing the above and restore. It's a software error.

  • Phone frozen on plug into itunes screen after trying to update

    I have an iphone 5 and I just updated my itunes to update my phone for iOS7. There was a message that said it could'nt update and then my phone became frozen on the screen that tells me to plug into itunes. I am plugged into itunes but my computer/phone is not recognizing that and I can't get off of that screen. I have tried to turn off my phone and back on, unplug it and plug it back in and nothing. what do I do?

    I had the same problem after updating...I thought that was my phone's problem, so I restored it...unfortunately, i had forgotton my password...I need that password to restore my iphone back up.
    Any idea how to recover this password.... Thanks much

  • Iphone 5 stuck on connect to itunes screen- if i try and get it out of recovery mode it trys to extract the data and then says the phones memory is full

    iphone 5 stuck on connect to itunes screen- if i try and get it out of recovery mode via itunes,  it trys to extract the data and then says the phones memory is full- cant seem to get it sorted, any ideas? I have an ipad mini if that helps?!

    Hey craigfromsheffield,
    I would suggest that you use the following information in order to help you resolve this issue:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Phone stuck at "Plug Into iTunes screen" but it is not frozen.

    I'm using windows 8.1. My iTunes can successfully sync and detect my ipad air but after updating my ipod touch 4th gen this afternoon, it is stuck at the "Plug into iTunes" screen you have when you first get such a device. When I plug it into my computer, the "USB Plug-in" sound is heard and the Apple Mobile Device Driver detects it in Device manager, but the Ipod does not appear in My Computer or iTunes and remains stuck on the "Plug into to iTunes" screen

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    Next try on another computer

  • Iphone 5 stuck on plug into itunes after battery was depleted

    Just got the iphone 5 on Dec 23, 2012 today it died on me(first time since I got it) and when I went to plug it in, it seemed like after 5 min or so it was going to come back on but, instead it would just flash the apple Logo and turn back off, i went ahead and hard reseted the phone and thats when it went into recovery mode and displayed the plug into itunes screen , now its stuck there and recover/restore fails with a code 21. and wont go anywhere from there Note: i have tried on 5 different PC's now with no luck. Heeeeeeelp!!!

    Place the device in DFU mode (google it) and restore.
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • Stuck on -Plug into iTunes- Screen

    Hello fellow iPhone users, I need help.
    When I tried to update the phone (5c), it got stuck on the -plug into iTunes- screen. The iTunes also stopped recognizing the phone.
    I have tried:
    1. turning it off
    2. putting it on DFU mode
    3. putting it on recovery mode
    4. reconnecting iPhone to iTunes with different USB ports/cables.
    After doing all of these things, iPhone is still unrecognized on the iTunes (yes it is updated), and the phone remains on the same screen. Any help is appreciated. Thank you.

    Hello Guo hui Gan,
    The following articles provide some additional troubleshooting steps that can help get your iPhone to reappear in iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Cheers,
    Allen

  • HT4528 Tried updating my software. Now phone stuck with plug into itunes icon. Anyway to restore without itunes?

    Tried updating my software. Now the screen is stuck on plug into iTunes icon. I don't have a computer I can use. Is there anyway to get around this and fix phone?

    No chance.
    If the "plug into iTunes"-Logo appears, you have to do so.
    Sorry.

  • IPad mini stuck on "plug in itunes" screen after ios7 update

    I planned on updating to ios7 through wifi, but now it's asking me to plug into itunes (black screen with itunes icon and plug pointing towards it).
    I can't plug into itunes because I'm on an laptop with 10.5.8 on it (so itunes hasn't been updated in a while). 
    So...what can I do here to get past this screen?  I didn't think I would have to plug it in to itunes if downloading through wifi.
    My iphone 4s updated without any issues through wifi.  Any help here (besided telling me to upgrade my laptop/itunes for the moment) would be
    very much appreciated.
    Thanks

    The iPad has gone into recovery mode, so you will need to connect it to a computer's iTunes (iTunes 11.1), and on a Mac you will need OS X 10.6.8+ - there isn't another way.

  • IPhone stuck on plug into iTunes screen

    I pugged my iPhone in to iTunes on my computer the other day and it worked fine until an unknown error popped up mid update so I pressed cancel and unplugged my iPhone but on my iPhone it just told me to plug my phone into iTunes but every time I plug it in, my phone nor computer read it as plugged in. My phone is now stuck on the screen that tells me to plug it into iTunes. I can turn it on and off and reset it but it is still stuck on the screen. I have checked the plug with other phones and it is fully functional. iTunes is also updated  to the newest software on the computer.

    Hello Sweebs44
    If you are unable to get your iPhone recognized in iTunes, then check out the articles below to go through and troubleshoot the issue. You may nned to put your iPhone into recovery mode or check the drivers or security software on your computer.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • My iphone 3g is stuck on plug into itunes screen

    It did this after I tried updating my phone. I have tried different USB cables. I have uninstalled and reinstalled itunes. I have did the software interference thing. Help!!!!!!!!!!!!!!

    OK so I went to the Apple store and he managed to restart my iPhone by putting it into "recovery mode". I just Googled how to do this as I wasn't there when he did it..
    Disconnect the USB cable from your iPhone, but leave the other side connected to your Mac or PC
    Launch iTunes
    Press and hold down the Home and Sleep/Power button on the top of the iPhone to turn off the iPhone
    Press and continue to hold the Home Button while you reconnect the USB cable to your iPhone, this will cause the iPhone to turn on
    Continue to hold the Home button until an alert message in iTunes informing you that an iPhone in recovery mode has been detected, like the screenshot below:
    Your iPhone is now in recovery mode. If you have not launched iTunes, you will see the familiar screen of the USB cable pointing at the iTunes logo signaling to connect the iPhone to iTunes to start recovery.
    Once you’re in recovery mode, you can either restore the iPhone or adjust the firmware as necessary.
    After restoring or upgrading firmware, your iPhone will automatically reboot and exit recovery mode on it’s own.
    It seems you will also need a wifi connection to complete the recovery mode.
    TIP: If you have backed up your iPhone, click the "restore from iTunes back up" (last option) so when you plug it back in, it will restore from your back up instead of restoreing it to the original factory setttings.
    NOTE: The above was really hard for me to get working so good luck! I tried a number of times and didn't get any message in iTunes but got my iPhone into what i assume is the "recovery mode". I'm still trying to get access a wi-fi connection to see if this will work but I will post another update once I can give it a go!
    Good Luck! And let me know if anyone successful!

Maybe you are looking for

  • 60 GB external Firewire Drive Won't Mount

    I have a 60GB external Firewire Drive that I have been using for a long time. I just turned on the computer and it won;t mount. I opened up the Disk Utility and I see that on the left side it says "57.3 GB Maxtor." I repaired permissions and verify d

  • Use of External Action in OAM Workflows

    Hi, Can we use External Action in OAM workflows to invoke OAM webservices? If anyone has relevent documentation ,please send me the link (how to use external action with any example that describes the usage) . Thanks & Regards, Srikanth

  • How to delete customized field from an infotype

    Hi All, I have created a customized field in standard infotype.Now i want to remove that field. Can anyone pls send me procedure to delete the customized field. Thanks Partha.

  • 2 Submit Buttons --- doesn't process form

    I previously was utilizing one button and the cancelAction command. However, this was causing the form to be submitted when used in the preSubmit event. I have recently implemented a 2 submit button solution to a form, which works beautifly for valid

  • Little help about Grid Control

    Hello, is it possible to reconfigure EM Grid Control after changing hots's IP and name? Do I need to install it again or there's something like emca -config dbcontrol db in EM Database Console? Thx in advance, Aliq